- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Thinner 2631 is a hydrocarbon-free thinner.
Click To Jump To Section:
Features & Benefits
- For use with compatible HMG systems.
For use with the following HMG products:
Product Specification
Technical Data | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2631 | ||||||
Volume Solids: | 0.0% | |||||
VOC Content: | 0.815kgs/ltr | |||||
SG: | - | |||||
Viscosity: | Not determined | |||||
Density: | 0.807 g/cm³ | |||||
Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
Flash Point: | -18°C |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Product Notes
Information On Basic Physical And Chemical Properties | ||||||
---|---|---|---|---|---|---|
HMG Thinner 2631 | ||||||
Form: | According to product specification | |||||
Colour: | According to product specification | |||||
Odour: | Characteristic | |||||
Odour Threshold: | Not determined | |||||
pH-value 20°C: | Not determined | |||||
Melting point/freezing point: | Undetermined | |||||
Initial boiling point and boiling range: | 56°C | |||||
Flash Point: | -18°C | |||||
Flammability (solid, gas): | Not applicable | |||||
Ignition temperature: | 370°C | |||||
Decomposition temperature: | Not determined. | |||||
Auto-ignition temperature: | Product is not selfigniting. | |||||
Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
Explosion limits: Lower: | 2 Vol % | |||||
Explosion limits: Upper: | 15 Vol % | |||||
Vapour pressure at 20°C: | 233hPa | |||||
Density at 20°C: | 0.807g/cm³ | |||||
Relative density: | Not determined | |||||
Vapour density: | Not determined | |||||
Evaporation rate: | Not determined | |||||
Solubility in / Miscibility with water: | NOT MISCIBLE | |||||
Partition coefficient: n-octanol/water: | Not determined | |||||
Viscosity: Dynamic at 20°C: | Not determined | |||||
Viscosity: Kinematic: | Not determined | |||||
Solvent content: Organic solvents: | 99.7% - Water: 0.3% | |||||
Solids content: | 0.0% |
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Data sheet
- Manufacturer
- HMG Paints Limited
- Density
- 0.807 g/cm³
- Solids by Volume
- 0.0%
- VOC
- 0.815kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Size
- 5L & 25L
- UN Number
- 1263
- Base Type
- Hydrocarbon-Free
- Product Usage Type
- Thinner
- Categorised As
- Accessories > Thinners
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Thinner 2631 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
HMG Pre Cat Primefast 2014-04
HMG Pre Cat Primefast 2014-04 is a high solids, 1K MDF primer. Fast drying Superb filling properties Ease of application Excellent sandability
HMG DG282 14 MDF Sealer
HMG DG282 14 MDF Sealer (Base) is a high solids, fast drying MDF primer. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG DG282 14 MDF Sealer Hardener (Part 2) HMG Acid Cat 91 Hardener One part of a two part...