- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
HMG Acrythane Fluorescent is a 2K acrylic fluorescent cured with an isocyanate hardener.
This product MUST be purchased/used in conjuction with its manufacturer specified hardener and thinner:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acrythane Fluorescent | ||||
| Hardener (Part 2) | HMG Hardener 9004 Standard or HMG Hardener 9027 Wintermix | ||||
| Thinner (Part 3) | HMG Thinner 2601 or HMG Thinner 2602 | ||||
- Coat two of a three coat system.
Description
HMG Acrythane Fluorescent is a 2K acrylic fluorescent cured with an isocyanate hardener.
This product MUST be purchased/used in conjuction with its manufacturer specified hardener and thinner:
| 2-Pack System Details | |||||
|---|---|---|---|---|---|
| Base (Part 1) | HMG Acrythane Fluorescent | ||||
| Hardener (Part 2) | HMG Hardener 9004 Standard or HMG Hardener 9027 Wintermix | ||||
| Thinner (Part 3) | HMG Thinner 2601 or HMG Thinner 2602 | ||||
HMG Acrythane Fluorescent is part of a 3 coat system as follows;
| 3 Coat System Details | |||||
|---|---|---|---|---|---|
| Coat 1 (White) | HMG Epiprime / HMG Polykote 2K MU Primer / HMG Cellulose APS Primer / HMG Polykote 2K AMC Primer | ||||
| Coat 2 | HMG Acrythane Fluorescent | ||||
| Coat 3 (Clear) | Overcoat with HMG Acrythane XSC21 Clear to attain gloss, improve durability and to help protect against UV degradation | ||||
Please note more than one coat of each may be required depending on application to achieve desired results.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Part two of a three part system.
To be used with suggested primer/filler/sealer systems:
- Not to be used in connection with 2004/42/CE
- Not to be used under SI2005:27773
Product Specification
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| HMG Acrythane Fluorescent | ||||||
| Volume Solids: | 68.8% | |||||
| VOC Content: | 0.620kgs/ltr | |||||
| SG: | - | |||||
| Viscosity: | 220 mPas | |||||
| Density: | 1.112 g/cm³ | |||||
| Storage Conditions: | Store between 5°C - 25°C. When not in use, cans must be kept sealed. | |||||
| Shelf Life: | 12 months from delivery date in original sealed containers. | |||||
| Pot Life: | 4 - 6 hours | |||||
| Flash Point: | 25°C | |||||
Additionl Technical Information:
- The light-fastness of fluorescent pigments (all grades) is between 2 - 3 on the blue wool scale (of 8). This level of colour fastness is increased to 3 - 4 by over-lacquering with a UVRA containing clear varnish or lacquer. Please contact Rawlins Paints for specific recommendations on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected] .
- In all environments, fluorescent paints will fade 5 - 10 times faster than conventional industrial, decorative or automotive coatings.
- Signal green suitable for small areas only.
Film Thickness Range And Coverage
| Product Data | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | ||
| Compliant Spray Gun | 20 μm | 70 μm | |
| Pressure Pot | 20 μm | 70 μm | |
Coverage: 14 square metres per litre (Theoretical).
- HMG technical data sheets indicate a dry film thickness that will be achieved when applying a particular wet film thickness.
- These values are a guide only and are not to be used as specifications.
- Film thickness will vary depending on actual use and specification.
- Great care should be taken to achieve the dft stated in the agreed specification and to avoid areas of excessively low or high thickness.
Drying Times
| Drying Times At 20°C | |
|---|---|
| Touch Dry: | 15 minutes |
| Dry To Handle: | 6 hours |
| Dry To Recoat: | 2 hours minimum - 3 days maximum |
| Fully Cured: | 7 hours |
Surface Preparation
- Ensure surfaces to be coated are dry and must be cleaned using the appropriate HMG product to remove all traces of contaminants.
- Read and follow the safety data sheet, product data sheet and label instructions.
- Stir all paints thoroughly before use.
- Always use the same batch number on the same job.
- Check colour & sheen.
- Filter the product immediately before use.
- Reduce emissions and maintain quality by replacing tin lid after use.
Application Methods
| Technical Data | |||||
|---|---|---|---|---|---|
| Compliant Spray Gun | Pressure Pot | ||||
| Mixing Ratio: | Base: 2 | Base: 2 | |||
| Hardener: 1 | Hardener: 1 | ||||
| Thinner: 1 | Thinner: 1 | ||||
| Thinner Options: | Hardener 9004 Standard | Hardener 9004 Standard | |||
| Hardener 9027 Wintermix | Hardener 9027 Wintermix | ||||
| Viscosity: | As mixed | As mixed | |||
| Spray Gun Setup: | 1.6 - 1.8 | 1.1 - 1.4 | |||
| Number Of Coats (Guide Only): | 2 - 4 full coats | 2 - 4 full coats | |||
| Flash Off: | 8 minutes | 8 minutes | |||
For further information on mixing ratios please contact Rawlins Paints on Tech - 0113 2455450 (option 2) or [email protected] Sales - 0113 2455450 or [email protected]
Product Notes
| Information On Basic Physical And Chemical Properties | ||||||
|---|---|---|---|---|---|---|
| HMG Acrythane Fluorescent | ||||||
| Form: | According to product specification | |||||
| Colour: | According to product specification | |||||
| Odour: | Characteristic | |||||
| Odour Threshold: | Not determined | |||||
| pH-value 20°C: | Not determined | |||||
| Melting point/freezing point: | Undetermined | |||||
| Initial boiling point and boiling range: | 126°C | |||||
| Flash Point: | 25°C | |||||
| Flammability (solid, gas): | Not applicable | |||||
| Ignition temperature: | 415°C | |||||
| Decomposition temperature: | Not determined. | |||||
| Auto-ignition temperature: | Product is not selfigniting. | |||||
| Explosive properties: | "Product is not explosive. However, formation of explosive air vapour mixtures are possible." | |||||
| Explosion limits: Lower: | 3 Vol % | |||||
| Explosion limits: Upper: | 10.4 Vol % | |||||
| Vapour pressure at 20°C: | 10.7 hPa | |||||
| Density at 20°C: | 1.112 g/cm³ | |||||
| Relative density: | Not determined | |||||
| Vapour density: | Not determined | |||||
| Evaporation rate: | Not determined | |||||
| Solubility in / Miscibility with water: | Fully miscible | |||||
| Partition coefficient: n-octanol/water: | Not determined | |||||
| Viscosity: Dynamic at 20°C: | 220 mPas | |||||
| Viscosity: Kinematic: | Not determined. | |||||
| Solvent content: Organic solvents: | 31.2% | |||||
| Solids content: | 68.8% | |||||
Health & Safety
- Refer to the safety data sheet in the attachments section above and tin label prior to use.
Product Details
4590-737894
Data sheet
- Manufacturer
- HMG Paints Limited
- For Use By
- Professional Use
- Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- Base: 2 - Hardener: 1 - Thinner: 1
- Touch Dry (at 20°C)
- 15 minutes
- Dry to Handle (at 20°C)
- 6 hours
- Dry to Recoat (at 20°C)
- 2 hours minimum - 3 days maximum
- Fully Cured (at 20°C)
- 7 hours
- Pot Life (at 20°C)
- 4 - 6 hours
- Coverage
- 14 square metres per litre
- Recommended Thinner/Cleaner
- Hardener 9004 Standard - Hardener 9027 Wintermix
- Density
- 1.112 g/cm³
- Solids by Volume
- 68.8%
- Heat Resistance (up-to)
- 150°C
- VOC
- 0.620kgs/ltr
- Shelf Life (from date of manufacture)
- 12 months from delivery date in original sealed containers.
- Recommended Dry Film Thickness
- 20μm
- Recommended Wet Film Thickness
- 70μm
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Finish
- Matt
- Application Method
- Spray
- Components
- 2K
- Product Usage Type
- Safety & Security
- Product Range
- Acrythane
- Colour Family
- Orange
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Pink
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
HMG Acrythane Fluorescent is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
HMG Acrythane 4G Clearcoat
HMG Acrythane 4G Clearcoat (Base) is a high solids acrylic polyurethane coating to meet the stringent requirements of the commercial vehicle market. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane 4G Clearcoat...
Price
£119.36
(incl. VAT)
In Stock and Available for Delivery
HMG Epiprime
HMG Epiprime is a zinc phosphate 2K epoxy primer offering excellent adhesion. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Epiprime Activator (Part 2) Option 1: HMG Hardener 9058 Standard Option 2: HMG Hardener...
Price
£23.46
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9027 Wintermix
HMG Hardener 9027 Wintermix is a fast curing, medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) Option 1: HMG Acrythane SC601 Colours Option 2: HMG Polykote 2K AMC Primer Option 3: HMG...
Price
£25.63
(incl. VAT)
In Stock and Available for Delivery
HMG Hardener 9004 Standard
HMG Hardener 9004 Standard is a medium solids isocyanate hardener. This product MUST be purchased/used in conjuction with its manufacturer specified base or activator/hardener: 2-Pack System Details Base (Part 1) HMG Acrythane SC601 Colours HMG Acrythane 102 HMG 2K Multi Surface Topcoat HMG Polykote 2K AMC Primer...
Price
£31.16
(incl. VAT)
In Stock and Available for Delivery