- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temal 400 is a heat resistant silicone paint. Resistant to temperatures up to +400°C dry heat, Temal 400 is used in cases demanding a heat-resistant product, such as fireplace doors, flues, exhaust pipes, sauna stoves.
- Recommended for exteriors of steel structures exposed to high temperatures.
- For industrial use only according to Directive 1999/13/EC.
- Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces indoors and outdoors.
Description
Tikkurila Temal 400 is a heat resistant silicone paint. Resistant to temperatures up to +400°C dry heat, Temal 400 is used in cases demanding a heat-resistant product, such as fireplace doors, flues, exhaust pipes, sauna stoves.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Topcoats
- Application Conditions
- Application
- VOC
- Health And Safety
Features & Benefits
- Resistant to temperatures up to +400ºC dry heat on steel surfaces.
- Recommended for exteriors of steel structures exposed to high temperatures.
- For industrial use only according to Directive 1999/13/EC.
- Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces indoors and outdoors.
Technical Data
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Tikkurila Temal 400 | ||||||
| Volume Solids: | 19±2% (ISO 3233) | |||||
| SG: | 1.1 kg / l | |||||
| Viscosity: | Kinematic (40°C): >20.5 mm² | |||||
| Density: | 1.05 g/cm³ - Thinner: 0.86 g/cm³ | |||||
| Storage Conditions: | Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C | |||||
| Flash Point: | >25°C (xylene) | |||||
| Coverage (for a flat substrate): | 12,7 m²/l | |||||
| Drying Times At 23°C | |||
|---|---|---|---|
| DFT 15µm | 10°C | 23°C | 35°C |
| Dust Dry: | 30 minutes | 15 minutes | 5 minutes |
| Touch Dry: | 1 hour | 30 minutes | 15 minutes |
| Recoatable: | 3 hours | 2 hours | 1 hour |
| Final cure and hardness will be obtained by curing at +230 ºC, 1 h | |||
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
- Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
- Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- Stir the product carefully before use.
- For air-assisted airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar. Atomising air pressure should be 2–3 bar. Spray angle shall be chosen according to the shape of the object.
- For conventional spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar.
- For brush application product should be thinned according to the circumstances.
Thinner/Cleaning
Thinner:
VOC
- The Volatile Organic Compounds amount of the paint mixture is 700 g/litre of paint.
- VOC of the paint (thinned 10 % by volume) is 715 g/l.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Product Details
4735-766941
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Zinc Silicate
- Application Method
- Spray, Airless Spray, Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Coverage
- 12,7 m²/l
- Compatible Primers
- Temasil 90
- Compatible Topcoats
- Temal 400
- Density
- 1.05 g/cm³ - Thinner: 0.86 g/cm³
- Solids by Volume
- 19±2% (ISO 3233)
- Heat Resistance (up-to)
- 400°C
- VOC
- 19±2% (ISO 3233)
- Touch Dry
- 35°C - 15 minutes
- Size
- 10L
- Recommended Dry Film Thickness
- 15µm
- Recommended Wet Film Thickness
- 75µm
- Dry to Recoat (at 10°C)
- 3 hours
- Touch Dry (at 10°C)
- 1 hour
- Dry to Recoat (at 23°C)
- 2 hours
- Touch Dry (at 23°C)
- 30 minutes
- Dry to Recoat
- 35°C - 1 hour
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Zinc Silicate
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Temal
- Colour Family
- Black
- Heat Resistance
- Up To 400°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temal 400 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Tikkurila Temasil 90
Tikkurila Temasil 90 is a two-component ethyl silicate zinc rich paint. Protective coating with an effect similar to that achieved with galvanizing. Can be used as a single coat or as a primer in protective coating systems. Excellent resistance to abrasion and weathering. Offers cathodic protection of steel. Can be used on steel...
Price
£739.34
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Thinner 1031
Tikkurila Thinner 1031 is a thinner for epoxy paints, silicone paints, polyvinylbutyral paints, 2-component zinc rich paints and epoxy shop primers.
Price
£26.23
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£26.45
(incl. VAT)
In Stock and Available for Delivery