- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temal 600 is a heat resistant silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
- Can be applied directly on steel surfaces without any primer.
- For industrial use only according to Directive 1999/13/EC.
Description
Tikkurila Temal 600 is a heat resistant silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
Temal 600 can be applied directly on steel surfaces without any primer.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Topcoats
- Application Conditions
- Application
- VOC
- Health And Safety
Features & Benefits
- Resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
- Can be applied directly on steel surfaces without any primer. • Resistant to temperatures up to +400 ºC when applied over zinc silicate paint.
- For industrial use only according to Directive 1999/13/EC.
- Suitable for fireplace doors, flues, exhaust pipes, sauna stoves and other hot metal surfaces.
Technical Data
| Technical Data | ||||||
|---|---|---|---|---|---|---|
| Tikkurila Temal 600 | ||||||
| Volume Solids: | 22±2% | |||||
| SG: | 1.0 kg/ | |||||
| Viscosity: | Dynamic (23°C): 0.58 mPa·s - Kinematic (40°C): <20.5 mm²/s | |||||
| Density: | 0.86 g/cm³ [25°C] | |||||
| Storage Conditions: | Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C | |||||
| Flash Point: | 25°C (xylene) | |||||
| Coverage (for a flat substrate): | 14.7 m²/l | |||||
| Drying Times At 23°C | |||
|---|---|---|---|
| DFT 15µm | 10°C | 23°C | 35°C |
| Dust Dry: | 30 minutes | 15 minutes | 10 minutes |
| Touch Dry: | 2 hours | 1 hour | 30 minutes |
| Recoatable: | 3 hours | 2 hours | 1 hour |
| Final cure and hardness will be obtained by curing at +230 ºC, 1 h | |||
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
- Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
- Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- For conventional spraying, the product is thinned 0–10%. Recommended nozzle tip is 1.2–1.4 mm and pressure 3–4 bar.
- For brush application the product should be thinned according to the circumstances.
Thinner/Cleaning
Thinner:
VOC
- The Volatile Organic Compounds amount of the paint mixture is 660 g/litre of paint.
- VOC of the paint (thinned 10% by volume) is 680 g/l.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Product Details
4736-766942
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Zinc Silicate
- Application Method
- Spray, Brush
- Sheen
- Metallic Lustre
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Key Features
- Heat resistant silicone aluminium paint which resists dry heat up to +650°C
- Coverage
- 14.7 m²/l
- Recommended Thinner/Cleaner
- Thinner 1006
- Compatible Primers
- Temasil 90
- Compatible Topcoats
- Temal 600, Temal 600 HB
- Solids by Volume
- 22±2%.
- Heat Resistance (up-to)
- 650°C
- VOC
- 680 g/l
- Touch Dry
- 35°C - 30 minutes
- Recommended Dry Film Thickness
- 15µm
- Recommended Wet Film Thickness
- 70µm
- UN Number
- UN1263
- UN Number
- UN1263
- Dry to Recoat (at 10°C)
- 3 hours
- Touch Dry (at 10°C)
- 2 hours
- Dry to Recoat (at 23°C)
- 2 hours
- Touch Dry (at 23°C)
- 1 hour
- Dry to Recoat
- 35°C - 1 hour
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Zinc Silicate
- Finish
- Metallic
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Temal
- Colour Family
- Grey
- Heat Resistance
- Up To 700°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temal 600 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
