- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tikkurila Temal 600 HB is a high build silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
- Can be applied by airless spray equipment.
- Recommended for exteriors of steel structures exposed to high temperatures.
Tikkurila Temal 600 HB is a heat resistant silicone aluminium paint which resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Surface Preparation
- Recommended Topcoats
- Application Conditions
- Application
- VOC
- Health And Safety
Features & Benefits
- Resists dry heat up to +650°C. The paint is used in cases demanding heat-resistant products such as fireplace doors, flues, exhaust pipes, sauna stoves.
- Can be applied by airless spray equipment.
- Recommended for exteriors of steel structures exposed to high temperatures.
Technical Data
Technical Data | ||||||
---|---|---|---|---|---|---|
Tikkurila Temal 600 HB | ||||||
Volume Solids: | 34±2% | |||||
SG: | 1.2±0.1 kg / l | |||||
Viscosity: | Kinematic (40°C): >20.5 mm²/s | |||||
Density: | 1.16 g/cm³ | |||||
Storage Conditions: | Store away from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials. Keep container tightly closed. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Recommended storage temperature is +5°C ...+25°C | |||||
Flash Point: | 25°C (xylene) | |||||
Coverage (for a flat substrate): | 13.6 m²/l |
Drying Times At 23°C | |||
---|---|---|---|
DFT 15µm | 10°C | 23°C | 35°C |
Dust Dry: | 30 minutes | 15 minutes | 10 minutes |
Touch Dry: | 2 hours | 1 hour | 30 minutes |
Recoatable: | 3 hours | 2 hours | 1 hour |
Final cure and hardness will be obtained by curing at +230 ºC, 1 h |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Recommended Film Thickness | ||
---|---|---|
Wet: | 75µm | |
Dry: | 25µm |
Surface Preparation
- Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
- Steel surfaces: Blast clean to grade Sa2½. (ISO 8501-1) If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.
- Zinc silicate surfaces: Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
- All surfaces must be clean, dry and free from contamination.
- The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
- Relative humidity of the air should not exceed 80% during application and drying.
- The surface temperature of steel should remain at least 3°C above the dew point. Good ventilation and sufficient air movement is required in confined areas during application and drying.
Application
- Stir the product carefully before use.
- For airless spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 0.011"–0.013" and pressure 120–160 bar. Spray angle shall be chosen according to the shape of the object.
- For conventional spraying, the product is thinned approximately 0–10%. Recommended nozzle tip is 1.4–1.8 mm and pressure 3–4 bar.
- For brush application product should be thinned according to the circumstances.
Thinner/Cleaning
Thinner:
VOC
- The Volatile Organic Compounds amount is 565 g/litre of paint.
- VOC content of the paint (thinned 10% by volume) is 595 g/l.
Health And Safety
Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets.
For industrial and professional use only.
Data sheet
- Manufacturer
- Tikkurila
- Water / Solvent Based
- Solvent
- For Use On
- Steel, Zinc Silicate
- Sheen
- Metallic Lustre
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Coverage
- 13.6 m²/l
- Recommended Thinner/Cleaner
- Thinner 1006
- Recommended Thinner/Cleaner
- Thinner 1006
- Compatible Primers
- Temasil 90
- Density
- 1.16 g/cm³
- Solids by Volume
- 34±2%
- Heat Resistance (up-to)
- 650°C
- VOC
- 595 g/l
- Touch Dry
- 35°C - 30 minutes
- Finish
- Metallic lustre
- Size
- 10L
- Recommended Dry Film Thickness
- 25µm
- Recommended Wet Film Thickness
- 75µm
- UN Number
- UN1263
- UN Number
- UN1263
- Dry to Recoat (at 10°C)
- 3 hours
- Touch Dry (at 10°C)
- 2 hours
- Dry to Recoat (at 23°C)
- 2 hours
- Touch Dry (at 23°C)
- 1 hour
- Dry to Recoat
- 35°C - 1 hour
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Zinc Silicate
- Finish
- Metallic Lustre
- Product Usage Type
- Topcoat
- Product Range
- Temal
- Colour Family
- Grey
- Heat Resistance
- Up To 700°C
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temal 600 HB is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Tikkurila Temafloor 400
2-component solvent-free epoxy varnish. An excellent product for dust binding and priming of new and old concrete floors, especially where solventless and odourless products are needed. The lacquer can be used for patching when filled with sand. Used as a binder for Temafloor 4000 troweling screed and epoxy concrete. Used also as a topcoat...
Tikkurila Temasil 90
Tikkurila Temasil 90 is a two-component ethyl silicate zinc rich paint. Protective coating with an effect similar to that achieved with galvanizing. Can be used as a single coat or as a primer in protective coating systems. Excellent resistance to abrasion and weathering. Offers cathodic protection of steel. Can be used on steel...
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...