Tikkurila Temaline EPL 100 is a two-component chemical resistant epoxy phenolic paint that is resistant to high temperatures.  Withstands dry heat up to 150ºC, but discolouration possible. Suitable for immersion of hot water between 65ºC - 90ºC.

Due to its binder type, Temaline EPL 100 has especially good resistance against many chemicals including light crude oil distillates, such as gasoline, diesel and kerosene.

As a CE-marked product, Temaline EPL 100 is suitable for concrete surfaces.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Technical Data
• Surface Preparation
• Recommended Primers
• Recommended Topcoats
• Application Conditions
• Mixing Components
• Application
• Thinners
• Cleaning Of Equipment
• VOC
• Health And Safety
• Metal Systems

Features & Benefits

• Two-component epoxy paint.
• Chemical resistant.
• High temperature resistant. Withstands dry heat up to 150ºC, but discolouration possible. Suitable for immersion of hot water between 65ºC - 90ºC.
• Due to binder type has especially good resistance towards many chemicals including light crude oil distillates like gasoline, diesel and kerosene.
• Resistance to fuels and chemicals are listed in the separate chemical resistance table.
• Resistant to dilute solutions of non-oxidizing acids, alkali and salts in immersion.
• As a CE marked product Temaline EPL 100 is suitable for concrete surfaces.

Technical Data

Volume Solids: 72±2% (ISO 3233).

Weight Solids: 83±2%.

Specific Gravity: 1.45 kg/litre (mixed).

Mixing Ratio:

• Base - 5 parts by volume - Temaline EPL 100.
• Hardener - 1 part by volume - 008 5612.

Pot Life (23°C): 1 hour

Recommended Film Thicknesses and Theoretical Coverage:

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Drying Time:

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

Gloss: Semi-gloss.

Colour Shades: White (app. RAL 9010), beige (RAL1015) and light grey (RAL 7032 and 7044).

Surface Preparation

• Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4).

Steel surfaces:

• Blast clean to grade Sa2½ (ISO 8501-1). The surface profile must be minimum medium (G). (ISO 8503-2).

Recommended Primers

Temaline EPL 100.

Recommended Topcoats

Temaline EPL 100.

Application Conditions

• All surfaces must be clean, dry and free from contamination.
• The temperature of the ambient air, surface and paint should not fall below +10ºC during application and drying.
• The surface temperature of steel should remain at least 3°C above the dew point.
• Good ventilation and sufficient air movement is required in confined areas during application and drying.

Mixing Components

• First stir base and hardener separately.
• The correct proportions of base and hardener must be mixed thoroughly before use.
• Use power mixer for mixing.
• Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.

Application

• For airless spraying, the product is thinned approximately 0–5%.
• Recommended nozzle tip is 0.015"–0.019” and 160–200 bar.
• Spray angle shall be chosen according to the shape of the object.

Thinners

Thinner 1031.

Cleaning Of Equipment

Thinner 1031.

VOC

The Volatile Organic Compounds amount is 240 g/litre of paint mixture. VOC content of the paint mixture thinned 5% by volume is 270 g/l.

Health And Safety

Further information about hazardous influences and protection are detailed in individual health and safety data sheets.

For industrial and professional use only

Metal Systems

Please contact Rawlins Paints' Technical Support Team on 0113 2455450 (option 2) or send a message to [email protected] for more information.

Click to go back to the top of the page