- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Description
Tikkurila Temadur AN Clear, a two component, full matt polyurethane varnish, hardener aliphatic isocyanate with excellent weathering and abrasion resistance.
The durable, non-chalking topcoat has good gloss retention and an easy to clean surface.
For industrial use only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Technical Data
- Mixing Ratio
- Recommended Film Thicknesses & Theoretical Coverage
- Drying Times
- Surface Preparation
- Application Conditions
- Mixing Components
- Application
- Thinner/Cleaner
Features & Benefits
- Excellent weathering and abrasion resistance
- A durable, non-chalking topcoat with good gloss retention and easy to clean surface
- For industrial use only
- Applies by conventional and air-assisted airless spraying
- Use a Power Mixer for mixing base and hardener
Technical Data
Volume solids
- 51±2%. (ISO 3233)
Weight solids
- 60±2%
Specific gravity
- 1.1±0.1 kg / l (mixed)
Pot life
- 2 hours (23 ºC)
Finish
Full matt
- ≤ 1 / 60º
- ≤ 3 / 85º
- Values are for film thickness of 30 - 40 µm
VOC
- The Volatile Organic Compounds amount (ISO 11890) is 430 g/l of paint mixture.
- VOC content of paint (thinned 25 % by volume) is 520 g/l.
Mixing Ratio
Base
- 3 parts by volume (Temadur AN Clear)
Hardener
- 1 part by volume (008 7590)
Recommended Film Thicknesses & Theoretical Coverage
| Recommended film thicknesses | Theoretical coverage | |
|---|---|---|
| wet | dry | |
| 60µm | 30µm | 17.0 m²/l |
| 80µm | 40µm | 12.8 m²/l |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.
Drying Times
| DFT 40 µm | 5℃ | 10℃ | 23℃ | 35℃ |
|---|---|---|---|---|
| Dust dry, after | 40 min | 30 min | 20 min | 10 min |
| Touch dry, after | 12 h | 8 h | 4 h | 2 h |
| Recoatable, after | See Application section |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.
Surface Preparation
Primed surfaces:
Oil, grease, salt and dirt are removed from the surface by appropriate means.
Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)
Application Conditions
All surfaces must be clean, dry and free from contamination.
The temperature of the ambient air, surface or paint should not fall below 5℃ during application or drying.
Relative humidity of the air should not exceed 80% during application and drying.
The surface temperature of the steel should remain at least 3℃ above the dew point.
Good ventilation and sufficient air movement is required in confined areas during application and drying.
Mixing Components
First stir base and hardener separately.
The correct proportions of base and hardener must be mixed thoroughly before use.
Use power mixer for mixing.
Insufficient mixing or incorrect mixing ratio will result in uneven drying of the surface and weaken the properties of the coating.
Application
In order to obtain an even, non-porous finish, use a “wet-on-wet” technique: first a misty coat, then let the solvents evaporate for 3–8 minutes and then apply the full coat.
There is no need for a misty coat if the overcoating interval between Temadur AN and Temadur AN Clear is not more than 1 hour at room temperature (+23°C).
For conventional spraying:
The product is thinned approximately 15–25% to the viscosity 18–22s (DIN4). Recommended nozzle tip is 1.2–1.6 mm and pressure 2–4 bar.
For air-assisted airless spraying:
The product is thinned approximately 7–15% to the viscosity 20–30s (DIN4). Recommended nozzle tip is 0.009"–0.011" and pressure 120– 160 bar. Spray angle shall be chosen according to the shape of the object.
Thinner/Cleaner
Product Details
4765-770124
Data sheet
- Manufacturer
- Tikkurila
- Interior / Exterior Use
- Exterior Use
- For Use On
- Metal
- Application Method
- Spray
- Sheen
- Matt
- Colour
- Clear
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 6L
- Parts
- 2
- Base Type
- Polyurethane
- Interior/Exterior Use
- Exterior
- Solvent
- Mixture
- Mixing Ratio
- 3:1
- Suitable Substrates
- Steel
- Key Features
- Excellent weathering and abrasion resistance
- Application
- Spray
- Coverage
- 12.8 to 17.0m²/l
- Recommended Thinner/Cleaner
- Thinner 1048, Thinner 1061
- Unit Contents
- Base, hardener (008 7590)
- Compatible Primers
- Temadur AN
- Compatible Topcoats
- Temadur AN Clear
- Min. Application Temperature
- 5ºC
- Solids by Volume
- 51±2%. (ISO 3233)
- VOC
- The Volatile Organic Compounds amount (ISO 11890) is 430 g/l of paint mixture. VOC content of paint (thinned 25 % by volume) is 520 g/l.
- Finish
- Matt
- Recommended Dry Film Thickness
- 30µm to 40µm
- Recommended Wet Film Thickness
- 60µm to 80µm
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Dry to Handle (at 23°C)
- 4 h
- Fully Cured (at 23°C)
- -
- Pot Life
- 2 hours (at 23 ºC)
- Base Type
- Polyurethane
- Suitable For Use On
- Metal
- Finish
- Matt
- Application Method
- Spray
- Product Usage Type
- Topcoat
- Product Range
- Temadur
- Colour Family
- Clear
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tikkurila Temadur AN Clear is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Tikkurila Thinner 1048
Tikkurila Thinner 1048 is a thinner for polyurethane paints, oxirane ester paints, 2-component acrylic paints, polyaspartic paints and polysiloxane paints. For use with recommended Tikkurila products.
Price
£26.54
(incl. VAT)
In Stock and Available for Delivery
Tikkurila Thinner 1061
Tikkurila Thinner 1061 is a fast thinner for polyurethane paints.
Price
£190.63
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£26.45
(incl. VAT)
In Stock and Available for Delivery