- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Two-component filler for wood and metal shuttering.
- Can be used for both deep and shallow damaged areas.
- Strong adhesion.
- Resistant to impact and abrasion.
- Resistant to mould oils.
Description
Bonda Shutter Fill is a two-component filler for both wood and metal shuttering.
Quick Links - Click To Jump To Section:
Features & Benefits
- Can be used for both deep and shallow damaged areas
- Strong adhesion
- Resistant to impact and abrasion
- Resistant to mould oils
Product Specifications
Technical Data | |
---|---|
Bonda Shutter Fill | |
Coats | Not applicable |
Curing Time | 30 minutes – 1 hour depending on temperature and humidity |
Re-coating Time | Once fully cured and after sanding back, most paints can be applied |
Application Temperature | Ideally 15-25°C, but do not use below 10°C |
Coverage | Not applicable |
Maintenance | Not applicable |
Compatibility | Not Applicable |
Settlement | Not applicable |
Shelf Life | 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C |
Application
- Mix the filler with the hardener on a non-porous surface using an amount of filler the size of a golf ball to a pea-sized ball of hardener as the mixing ratio
- Mix thoroughly until an even colour is obtained
- Do not prepare more than is required as any excess will be unusable after 10 minutes
- All tools must be cleaned immediately after use with Rustins Cellulose Thinners before product sets hard
Health and Safety
- Harmful by inhalation
- Contains Styrene
- Do not breathe vapours
- Wear suitable protective gloves and eye/face protection
- Further information can be found in the product data sheet and safety data sheet
Product Details
5123-862573
Data sheet
- Manufacturer
- Bonda
- For Use On
- Wood, Metal
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1.5KG, 7KG
- Coverage
- N/A
- Min. Application Temperature
- Ideally 15-25°C, but do not use below 10°C
- Density
- 1.60
- Shelf Life (from date of manufacture)
- 18 months if stored under the recommended conditions. Store in cool and dry place below 25°C
- UN Number
- UN3269
- Drying time
- 30 minutes – 1 hour depending on temperature and humidity
- Dry to Recoat
- Once fully cured and after sanding back, most paints can be applied
- Base Type
- Polyester
- Suitable For Use On
- Wooden Shutters
- Suitable For Use On
- Metal Shutters
- Product Usage Type
- Filler
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Bonda Shutter Fill is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT