- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Axalta ViterPrime EA Primer is a fast air drying, modified epoxy ester single pack primer for the ACE market.
- Fast air drying or force drying, with good corrosion resistance
- Touch dry in 20mins at 23°C
- Excellent adhesion
- For steel substrates
- Suitable for application by airless or conventional spray
- Specially designed for the coating of stone crushing, agricultural, construction and earthmoving equipment
- Typically topcoated with Axalta Viterlac TF95
Description
Axalta ViterPrime EA Primer is a fast air drying, modified epoxy ester single pack primer for the ACE market.
Fast air drying or force drying, with good corrosion resistance and excellent adhesion on steel substrates.
It is specially designed for the coating of stone crushing, agricultural, construction and earthmoving equipment. It is suitable for application by airless or conventional spray.
Axalta ViterPrime EA Primer is typically topcoated with Axalta Viterlac TF95.
Approvals/Certification - Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected].
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Mixing
- Thinner
- Application Conditions
- Application Methods
- Product Notes
- Health & Safety
Features & Benefits
- Modified epoxy ester single pack primer
- For the ACE market
- Fast air drying or force drying, with good corrosion resistance
- Touch dry in 20mins at 23°C
- Suitable for application by airless or conventional spray
- Specially designed for the coating of stone crushing, agricultural, construction and earthmoving equipment
Product Specification
| Technical Data | |
|---|---|
| Axalta ViterPrime EA Primer | |
| Volume Solids | 39 ± 3% (varies with colour) |
| VOC Content | 522 + 20 g/litre (varies with colour and mix ratio) |
| SG | 1.20 – 1.30 kg/lt (varies with colour) |
| Storage Conditions | Store in dry, cool conditions and protect from frost |
| Shelf Life | Minimum 12 months if stored as above in unopened containers |
| Flash Point | 23-60°C |
Film Thickness Range And Coverage
| Film Thickness Range & Coverage | |||
|---|---|---|---|
| Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
| Minimum | 30 µm | 77 µm | 13 m2/litre |
| Maximum | 35 µm | 90 µm | 11.1 m2/litre |
| Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated | |||
Drying Times
| Drying Times | |
|---|---|
| Applied to 35 microns DFT | 23℃ |
| Flash Off | 10 - 15 mins |
| Air Dry | Touch Dry – 20 mins; Hard Dry - overnight |
| Force Dry | 30 mins @80°C |
| Recoating without sanding | After 1 hr and before 8 hrs, then after 36 hrs |
| Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation | |
Surface Preparation
- All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination
- Where necessary, remove weld spatter and grind smooth all sharp edges and weld seams
- Blast clean to BS EN ISO 8501-1:2007 Sa2½, surface profile 50-75 microns, or use a suitable phosphate pre-treatment process, as appropriate
Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected] to check your pre-treatment process is suitable.
Mixing
- Mix thoroughly before use
Thinner
Thinner
Equipment Cleaner
Application Conditions
- Only apply in conditions of good ventilation which must be maintained during drying and curing
- Do not apply when rain, mist, sleet or snow are imminent
- During application and drying time of the paint coating, the surface should be dry, the relative humidity should not exceed 85% and the steel temperature should remain at least 3°C above the dew point
- Paint temperature should ideally be at a minimum of 15ºC
Application Methods
- Airless spray: Tip size 11 – 13 thou (0.28-0.33mm) typical
- Conventional spray: thin to 25 - 35 seconds BSB4 cup @25°C for conventional spray. Please Note: This increases the VOC level
- Brush and roller should be used for touch-up only
Product Notes
- May be overcoated with a range of topcoats including Axalta Viterlac TF95
Please consult Axalta Coating Systems or Rawlins Paints Technical on 0113 2455450 (option 2) or send a message to [email protected] for advice.
Health & Safety
- Containers are provided with safety labels which should be observed
- Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets
For specific advice regarding any aspect of this product, please consult our Technical Department on 0113 2455450 (option 2) or send a message to [email protected]
Product Details
5290-867524
Data sheet
- Manufacturer
- Axalta Coating Systems
- For Use On
- Steel
- Application Method
- Airless Spray, Spray
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Minimum Applied Thickness
- 30 µm DFT / 77 µm WFT
- Maximum Applied Thickness
- 35 µm DFT / 90 µm WFT
- Coverage
- 11.1 m²/litre - 13 m²/litre
- Recommended Thinner/Cleaner
- Thinner 1006
- Solids by Volume
- 39 ± 3%
- VOC
- 522 + 20 g/litre
- Shelf Life (from date of manufacture)
- 12 Months
- UN Number
- UN1263
- Dry to Recoat (at 23°C)
- After 1hr
- Touch Dry (at 23°C)
- 20min
- Specific Gravity
- 1.20 – 1.30 kg/lt (varies with colour)
- Hard Dry
- Overnight @23°C
- Base Type
- Solvent-Based
- Base Type
- Epoxy Ester
- Suitable For Use On
- Steel
- Finish
- Matt
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Product Range
- ViterPrime
- Colour Family
- Yellow
- Dry to Recoat (@ 20-25°C)
- 60 mins
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Axalta ViterPrime EA Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
