I want to paint a stainless steel door to a lift. Currently it is a very shiny smooth surface. What primer is recommended prior to painting on a top coat.

Assuming the stainless steel is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied to stainless steel, to provide improved adhesion for subsequent topcoat finishes. Assuming you are wanting a decorative finish, you could then consider 2 coats of Rust-Oleum CombiColor Original in your choice of Satin or Gloss, mixed to many RAL, BS or NCS Colours of choice to finish, which we'd recommend to apply to a small test area to check for compatibility and adhesion. An alternative we can recommend with greater confidence would be to prime with a coat of Rust-Oleum 3302 CombiPrimer Adhesion , before 2 coats of Rust-Oleum CombiColor Original in your choice of many RAL, BS & NCS Colours to a Gloss or Satin finish.

Hi, I’m wanting to emulsion some galvanised steel but I’m aware I will need to apply a suitable primer to the metal first in order to get the emulsion to stick, would this product be suitable? Thanks

Yes, assuming the galvanised steel is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied to prime the Galvanised Steel. For a suitable topcoat finish, Z insser AllCoat Exterior in a choice of Satin, Matt or Gloss can then be used as a decorative topcoat finish, mixed to your choice of 4400+ RAL, BS & NCS Colours.

Is this any good for powder coated up and over garage doors, the doors are galvanised under the powder coating? The manufacturer recommends 2 pack primer?

Assuming the doors are polyester powder coated, they are clean, dry, sound and prepared as detailed in the technical data sheet this could be used as primer below a single pack topcoat such as Zinsser Allcoat Exterior Water Based . This topcoat can be mixed to many RAL, NCS or BS colours in a matt, satin or gloss option.

I have already bought this bullseye 123 and want to use it to prime a UPVC front door. Is this sufficient or do I need 123 Plus? Thanks

Zinsser Bulls Eye 1-2-3 can be used to prime a prepared upvc surface before application of a suitable topcoat.

I want to paint my polished stone mantle and glazed ceramic hearth. I am looking for a primer that I could use that would be suitable that doesn’t need a specific paint over top.

Thank you for the enquiry, unfortunately we do not have a product to recommend for this application.

Hi,i m shahd i wanted to know if ur product is suitable for glass bangles spraying. In short we want to spray it on glass bangles mixing it with fluroscent colours...and if ur product is available in india..thank you

No, unfortunately we do not have a product to recommend for this application and currently we do not ship to India.

can you please confirm if this product be applied direct to external lead work look forward to hearing from you

Assuming the external lead work is clean, dry, sound and prepared as detailed in the Technical Data sheet it can be applied to lead.

Can you tell me how to clean brushes after use please

Clean application tools with warm water and liquid detergent or household cleaner. Work solution into bristles/nap and rinse well. If Zinsser Bulls Eye 1-2-3 dries, use Zinsser Brush Cleaner & Restorer to remove dried paint on brushes.

Im looking at painting some garden fences and decking grey. They are currently dark brown would the grey cover the previous colour?

Zinsser Cover Stain followed by one of the Zinsser AllCoat Exterior (Water Based) range could be used for the fencing. Smartkote Safekote could be used for the decking.

I need to paint over some high gloss cream paint on wood furniture with a brilliant white dulux satinwood (water based) Will Zinsser 123 be suitable as an undercoat? I am trying to avoid having to sand all the furniture.

Zinsser B-I-N would have better adhesion, clean the surfaces to paint with Zinsser Universal Degreaser & Cleaner followed by a wipe over with a damp cloth to remove any residue of the cleaner then apply a coat of Zinsser B-I-N.

I have an old stone house that has been neglected for 5 years and rainwater has seeped under the floor to be sucked up by thick interior walls. The ingress of water has been stopped but time is needed for the walls to dry out completely. Even months of >30 deg days has not completely dried the walls.(this is in south of France) I have removed the ancient damp wallpaper to reveal awful dark mish mash of blacks and grey paint on the smooth finished stone surface. I want to paint over it while it dries, before repapering. Can I use acrylic emulsion? Would that allow the water in the wall to eventually evaporate?

There is no simple solution for this job. Zinsser Bulls Eye 1-2-3 would not be suitable. Something like Zinsser Watertite can be applied to a damp surfaces however this will seal in residual moisture, it will not allow the wall to dry out, but you can wallpaper over the Watertite at a later date. Zinsser Grade 1 is a breathable stain block primer and finish all in one. If the moisture content of the walls is 12% or less Grade 1 will hold back stains and allow the walls to breathe. It can be mixed to a wide range of pastel to medium shade colours and therefore can be left as the final finish coat or you can wallpaper over the product if required.

I need a paint that can seal new plastered wall around an inset stove. The wall heats up to about 70C.

Check out our blog post explaining what you can use for this: Painting the Walls around a Fireplace or Multi Fuel Stove

I want to paint cherry wood kitchen doors. Do I rub down doors before I apply Zinnser Bulls Eye 1-2-3 Plus? I was going to use Chalk paint in an ivory cream colour on top of this so should I purchase your white colour as a base?

Zinsser Bulls Eye 1-2-3 Plus does not require surfaces to be sanded prior to application only for them to be clean and dry, but if you wish to lightly sand the surfaces this would only help adhesion. Yes, white would be a good choice as a base for your chalk paint.

Hello. We have a classic gloss finished mahogany fireplace surround which we would like to paint but are very apprehensive about it. Is Zinser Bulls Eye 1-2-3 ideal for this or do you recommend something better?

Zinsser Bulls Eye 1-2-3 is excellent at adhering to smooth, glossy surfaces prior to painting so it would make an ideal primer for you to apply you're own finish over. Just ensure the surfaces you are painting around the fire don't get too hot (above 60-70°C).

Zinsser Bulls Eye 1-2-3

Reference ZIN123

Brand Zinsser

Search ID ZIN534

Available in 3,000 colours.
Usable on interior and exterior surfaces: walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and more.
Adheres to glossy surfaces without pre-sanding.
Resists mould and mildew growth.
Fast drying - recoat in 1 hour.
Compatible with both oil and latex topcoats.

Buy A Paint Colour Sample

Product customisation

Don't forget to save your customization to be able to add to cart

Colour Group

Size

£20.00(incl. VAT)

£16.67(ex. VAT)

Quantity

Please choose your colour

In Stock and Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

14 questions about the product

Description

Zinsser Bulls Eye 1-2-3 Water-Based Primer Sealer

A versatile and reliable primer designed for a wide range of surfaces and applications. Its water-based formula ensures easy cleanup with soap and water, making it a user-friendly choice for both professionals and DIY enthusiasts.

Surface Compatibility

Interior: drywall, plaster, concrete, wood, metal, PVC, laminates, and more
Exterior: wood, metal, masonry, PVC, fibreglass, and more

This primer adheres to various surfaces without the need for pre-sanding, saving time and effort. It effectively seals porous surfaces and blocks most stains, ensuring a smooth, uniform finish.

Performance Characteristics

Fast Drying: Touch dry in 30 minutes, recoat in 1 hour
High pH Resistance: Suitable for surfaces with pH up to 12.5
Rust Inhibitive: Prevents rust formation on metal surfaces
Mould and Mildew Resistance: Ideal for damp environments
Enamel Undercoat: Provides an excellent base for topcoats

The primer's rust-inhibitive properties and mould resistance make it suitable for both interior and exterior applications, including high-humidity areas and metal surfaces.

Application Instructions

Ready to use - no dilution necessary
Apply with a brush, roller, or spray
For best results, prime the entire surface
Clean tools with warm water and detergent after use

Ensure surfaces are clean, dry, and free of contaminants before application. For porous surfaces, a second coat may be required.

Limitations

Not suitable for heavy water stains, floors, decks, roofs, or surfaces in prolonged contact with water
Avoid use on surfaces subject to immersion or continuous water exposure

Ensure proper ventilation during application and curing. Store in a cool, dry place, and avoid freezing temperatures.

Safety and Environmental Information

Harmful to aquatic life with long-lasting effects. Avoid release to the environment. Dispose of contents and container in accordance with local, regional, national, and international regulations.

Contains a biocidal product. May produce an allergic reaction. Contains zinc oxide and other biocidal components.

MSDS Summary

UN Number: Not regulated
Safety: Harmful to aquatic life, avoid release to the environment
Contains Diisocyanates: No
Ensure proper disposal and avoid contamination of waterways.

Product Details

Reference 534-928956

Data sheet

Manufacturer: Zinsser
For Use By: Consumer Use
Interior / Exterior Use: Interior & Exterior
Water / Solvent Based: Water
For Use On: Glossed Surfaces
Glass
Masonry
Galvanised Steel
Fibreglass
PVC
Wood
Plaster
Concrete
Tile
Metal
Stucco
Application Method: Brush
Roller
Pad
VOC Levels: Ultra-Low (5-49 g/l)
Pack Size: 1L
2.5L
5L
10L
Coverage: 10m² per litre
Touch Dry: 35 Mins
UN Number: N/A
Colour(s): Fully Tintable
Base Type: Water-Based
Suitable For Use On: Stucco
Suitable For Use On: Glossed Surfaces
Suitable For Use On: Tiles
Suitable For Use On: Wood
Suitable For Use On: Plaster
Suitable For Use On: Galvanised Steel
Suitable For Use On: Glass
Suitable For Use On: PVC
Suitable For Use On: Fibreglass
Suitable For Use On: Masonry
Suitable For Use On: Metal
Suitable For Use On: Concrete
Application Method: Brush
Application Method: Roller
Application Method: Pad
Manufacturer: Zinsser
Usages: High Corrosion Resistance
Product Usage Type: Primer & Sealer
Product Range: Bulls-Eye 1-2-3
Fastest Delivery: Next Working Day
Colour Family: Cream
Colour Family: Beige
Colour Family: Grey
Colour Family: Green
Colour Family: Blue
Colour Family: Red
Colour Family: Brown
Colour Family: Pink
Colour Family: Orange
Colour Family: Purple
Colour Family: Yellow
Colour Family: Off-White
Colour Family: Black
Colour Family: White

Attachments

Download

Product Data Sheet

Download

Safety Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

Stewart Schwartz on 2024-10-28 11:05:34	Question: I want to paint a stainless steel door to a lift. Currently it is a very shiny smooth surface. What primer is recommended prior to painting on a top coat.
	Answer from Rawlins’ Technical Team: Assuming the stainless steel is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied to stainless steel, to provide improved adhesion for subsequent topcoat finishes. Assuming you are wanting a decorative finish, you could then consider 2 coats of Rust-Oleum CombiColor Original in your choice of Satin or Gloss, mixed to many RAL, BS or NCS Colours of choice to finish, which we'd recommend to apply to a small test area to check for compatibility and adhesion. An alternative we can recommend with greater confidence would be to prime with a coat of Rust-Oleum 3302 CombiPrimer Adhesion, before 2 coats of Rust-Oleum CombiColor Original in your choice of many RAL, BS & NCS Colours to a Gloss or Satin finish.

Craig on 2024-04-19 10:07:26	Question: Hi, I’m wanting to emulsion some galvanised steel but I’m aware I will need to apply a suitable primer to the metal first in order to get the emulsion to stick, would this product be suitable? Thanks
	Answer from Rawlins’ Technical Team: Yes, assuming the galvanised steel is clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied to prime the Galvanised Steel. For a suitable topcoat finish, Zinsser AllCoat Exterior in a choice of Satin, Matt or Gloss can then be used as a decorative topcoat finish, mixed to your choice of 4400+ RAL, BS & NCS Colours.

Byron on 2022-05-19 16:14:02	Question: Is this any good for powder coated up and over garage doors, the doors are galvanised under the powder coating? The manufacturer recommends 2 pack primer?
	Answer from Rawlins’ Technical Team: Assuming the doors are polyester powder coated, they are clean, dry, sound and prepared as detailed in the technical data sheet this could be used as primer below a single pack topcoat such as Zinsser Allcoat Exterior Water Based. This topcoat can be mixed to many RAL, NCS or BS colours in a matt, satin or gloss option.

Felicity on 2021-12-01 13:14:54	Question: I have already bought this bullseye 123 and want to use it to prime a UPVC front door. Is this sufficient or do I need 123 Plus? Thanks
	Answer from Rawlins’ Technical Team: Zinsser Bulls Eye 1-2-3 can be used to prime a prepared upvc surface before application of a suitable topcoat.

Britt on 2021-07-10 16:12:10	Question: I want to paint my polished stone mantle and glazed ceramic hearth. I am looking for a primer that I could use that would be suitable that doesn’t need a specific paint over top.
	Answer from Rawlins’ Technical Team: Thank you for the enquiry, unfortunately we do not have a product to recommend for this application.

Shahid gouri on 2021-07-05 14:38:06	Question: Hi,i m shahd i wanted to know if ur product is suitable for glass bangles spraying. In short we want to spray it on glass bangles mixing it with fluroscent colours...and if ur product is available in india..thank you
	Answer from Rawlins’ Technical Team: No, unfortunately we do not have a product to recommend for this application and currently we do not ship to India.

dave barron on 2021-04-18 19:23:46	Question: can you please confirm if this product be applied direct to external lead work look forward to hearing from you
	Answer from Rawlins’ Technical Team: Assuming the external lead work is clean, dry, sound and prepared as detailed in the Technical Data sheet it can be applied to lead.

Robert on 2019-11-17 18:14:20	Question: Can you tell me how to clean brushes after use please
	Answer from Rawlins’ Technical Team: Clean application tools with warm water and liquid detergent or household cleaner. Work solution into bristles/nap and rinse well. If Zinsser Bulls Eye 1-2-3 dries, use Zinsser Brush Cleaner & Restorer to remove dried paint on brushes.

Alex Overy on 2019-10-14 12:58:15	Question: Im looking at painting some garden fences and decking grey. They are currently dark brown would the grey cover the previous colour?
	Answer from Rawlins’ Technical Team: Zinsser Cover Stain followed by one of the Zinsser AllCoat Exterior (Water Based) range could be used for the fencing. Smartkote Safekote could be used for the decking.

GRANT WALLER on 2019-01-17 12:28:38	Question: I need to paint over some high gloss cream paint on wood furniture with a brilliant white dulux satinwood (water based) Will Zinsser 123 be suitable as an undercoat? I am trying to avoid having to sand all the furniture.
	Answer from Rawlins’ Technical Team: Zinsser B-I-N would have better adhesion, clean the surfaces to paint with Zinsser Universal Degreaser & Cleaner followed by a wipe over with a damp cloth to remove any residue of the cleaner then apply a coat of Zinsser B-I-N.

Sally Tyler on 2018-08-10 06:24:47	Question: I have an old stone house that has been neglected for 5 years and rainwater has seeped under the floor to be sucked up by thick interior walls. The ingress of water has been stopped but time is needed for the walls to dry out completely. Even months of >30 deg days has not completely dried the walls.(this is in south of France) I have removed the ancient damp wallpaper to reveal awful dark mish mash of blacks and grey paint on the smooth finished stone surface. I want to paint over it while it dries, before repapering. Can I use acrylic emulsion? Would that allow the water in the wall to eventually evaporate?
	Answer from Rawlins’ Technical Team: There is no simple solution for this job. Zinsser Bulls Eye 1-2-3 would not be suitable. Something like Zinsser Watertite can be applied to a damp surfaces however this will seal in residual moisture, it will not allow the wall to dry out, but you can wallpaper over the Watertite at a later date. Zinsser Grade 1 is a breathable stain block primer and finish all in one. If the moisture content of the walls is 12% or less Grade 1 will hold back stains and allow the walls to breathe. It can be mixed to a wide range of pastel to medium shade colours and therefore can be left as the final finish coat or you can wallpaper over the product if required.

David on 2017-02-24 21:34:50	Question: I need a paint that can seal new plastered wall around an inset stove. The wall heats up to about 70C.
	Answer from Rawlins’ Technical Team: Check out our blog post explaining what you can use for this: Painting the Walls around a Fireplace or Multi Fuel Stove

Carol on 2015-11-08 16:42:19	Question: I want to paint cherry wood kitchen doors. Do I rub down doors before I apply Zinnser Bulls Eye 1-2-3 Plus? I was going to use Chalk paint in an ivory cream colour on top of this so should I purchase your white colour as a base?
	Answer from Rawlins’ Technical Team: Zinsser Bulls Eye 1-2-3 Plus does not require surfaces to be sanded prior to application only for them to be clean and dry, but if you wish to lightly sand the surfaces this would only help adhesion. Yes, white would be a good choice as a base for your chalk paint.

Angela on 2015-06-25 14:30:43	Question: Hello. We have a classic gloss finished mahogany fireplace surround which we would like to paint but are very apprehensive about it. Is Zinser Bulls Eye 1-2-3 ideal for this or do you recommend something better?
	Answer from Rawlins’ Technical Team: Zinsser Bulls Eye 1-2-3 is excellent at adhering to smooth, glossy surfaces prior to painting so it would make an ideal primer for you to apply you're own finish over. Just ensure the surfaces you are painting around the fire don't get too hot (above 60-70°C).

IMPORTANT SHIPPING & DELIVERY INFORMATION

Zinsser Bulls Eye 1-2-3 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Zinsser Bulls Eye 1-2-3 Plus

White stain blocker. For interior and exterior walls, ceilings, doors, trim, fascia, soffits, foundations, railings, and related paintable surfaces. Bonds to glossy surfaces without scuff sanding. Formulated with proprietary stain-blocking resins. Binds moderately chalky surfaces. Dries quickly, touch dry in 30 minutes, and can be...

£26.64 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser B-I-N Aerosol

White matt. For interior ceilings, walls, doors, trim, cabinets, furniture, and related paintable surfaces. Dries in minutes; can be recoated in 45 minutes. Superior adhesion to glossy surfaces without scuff sanding. High-hiding formula blocks stubborn and persistent stains. Permanently blocks odours and seals bleeding knots and sap...

£18.65 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Interior (Solvent-Based)

Primer-finish in 2,900+ colours. For interior walls, ceilings, doors, trim, cabinets, panelling, and related paintable surfaces. Adheres to glossy surfaces without pre-sanding or deglossing. Blocks stains from water, fire, smoke, and nicotine. High pH resistance (up to 12.5) for concrete, plaster, and stucco. Professional formula that...

£23.92 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser Perma-White Interior

Available in 4,400+ matt and satin colours. Suitable for use on interior walls, ceilings, trim, doors, and more. Prevents mould and mildew growth on the paint film for up to 5 years. Self-priming with excellent adhesion to glossy and hard-to-paint surfaces. Durable, washable, moisture-resistant finish that resists dirt pickup. Low...

£19.80 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Exterior Satin | Multi-Surface Paint in 4,400+ Colours

Zinsser AllCoat Exterior Satin (Water Based)

High-performance paint suitable for all exterior surfaces in 4,400+ colours. Including RAL 7016 Anthracite Grey and Chartwell Green. Perfect for use on uPVC, timber, metal, masonry and exterior brickwork, plastic (incl. composite), concrete. Also cladding, weathered bitumen, stucco, brick, stone and more. Re-coatable in just 1 hour,...

£19.26 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser Perma-White Exterior

We no longer stock this product, but can recommend Zinsser AllCoat Exterior Matt (Water Based) or Zinsser AllCoat Exterior Satin (Water Based) as a great alternative. Please note: it is important to check that any alternative product is suitable for your requirements, as our suggestion is given in good faith but without warranty. If you are...

Shop now

In stock

Zinsser B-I-N

Shellac-based primer-sealer and stain killer in 1,500+ colours. For interior and spot exterior applications on ceilings, walls, doors, trim, cabinets, furniture, and more. Quick Drying: Dries to the touch in 20 minutes and can be recoated in 45 minutes. Superior Adhesion: Adheres to glossy surfaces without the need for sanding. Stain...

£30.49 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser Gardz

A clear, water-based, acrylic resin sealer. Can be used on damaged drywall, new drywall, plaster, calcimine, residual wallpaper adhesive, textured walls, and popcorn ceilings. Penetrates deeply into porous surfaces to create a hard, moisture-proof film. Prevents drywall blistering and bubbling by sealing and binding surfaces. Strengthens...

£10.56 (incl. VAT)

Shop now

In Stock and Available for Delivery

General Painting Application Kit

Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...

£12.08 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser Brush Cleaner & Restorer

Removes dried-on paint from brushes, including shellac, solvent, and water-based paints. Fast-acting formula. No overnight soaking required. More effective than traditional mineral cleaners like white spirit. Contains powerful detergents for an ultra-clean finish.

£8.78 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Exterior Gloss | Multi-Surface Protection in 4,400+ Colours

Zinsser AllCoat Exterior Gloss (Water Based)

Ultimate performance all-surface paint in 4,400+ colours. Suitable for uPVC and composite, timber, metal, masonry, plastic, concrete, cladding, and more. Offers excellent resistance to cracking, blistering, and flaking. Features a biocide to protect against fungal degradation. Self-priming and bonds to existing glossy paints without...

£21.10 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser Mould Killer & Remover

Effective mould, fungus, and algae remover. Ideal for use on internal surfaces such as tiles, wood, plaster, and wallpaper. Perfect for bathrooms, kitchens, and high-humidity areas. Contains a powerful fungicide for a better and longer-lasting paint finish. Fast-acting formula that cleans and prepares surfaces for painting. Suitable for...

£8.78 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Exterior Matt | Multi-Surface Paint | 4600+ Colours

Zinsser AllCoat Exterior Matt (Water Based)

Matt All-Surface Paint in 4,400+ colours. Perfect for all exterior surfaces including uPVC, wood,metal, masonry, and more. Provides long-term decoration with excellent colour retention. Re-coatable in 1 hour, making projects quick and efficient. Low maintenance, water-shedding coating with a vapour-permeable finish. Contains a biocide...

£19.26 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Exterior Satin (Solvent Based)

Ultimate performance all-surface paint in 4,400+ colours. For use on surfaces including uPVC, timber, metal, masonry, plastic, concrete, cladding and more. Multi-surface application with excellent colour retention. Weather-resistant and resistant to showers after 1 hour. Re-coatable in 3 hours and designed for long-term decoration....

£23.30 (incl. VAT)

Shop now

In Stock and Available for Delivery

Zinsser AllCoat Exterior Gloss| High Performance Weatherproof Paint in 4,100+ Colours

Zinsser AllCoat Exterior Gloss (Solvent Based)

The leading all weather exterior use paint. 4,400+ colours for new or previously painted wood, metal, cladding, uPVC, stucco, brick, stone, cured concrete and more. Provides excellent resistance against cracking, blistering, chalking, and flaking. Weather-resistant silicon alkyd formula protects against rain and severe weather....

£31.16 (incl. VAT)

Shop now

In Stock and Available for Delivery

COVERAGE CALCULATOR
Units
Total area²
Or enter length and width dimensions:
Length
Width

Follow us on:

Zinsser Bulls Eye 1-2-3

Zinsser Bulls Eye 1-2-3

Product customisation

Your customization: Chosen Colour: Ready Mixed - White (#FFFFFF)

Zinsser Bulls Eye 1-2-3 Water-Based Primer Sealer

Surface Compatibility

Performance Characteristics

Application Instructions

Limitations

Safety and Environmental Information

MSDS Summary

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION

Zinsser Bulls Eye 1-2-3 Plus

Zinsser B-I-N Aerosol

Zinsser AllCoat Interior (Solvent-Based)

Zinsser Perma-White Interior

Zinsser AllCoat Exterior Satin (Water Based)

Zinsser Perma-White Exterior

Zinsser B-I-N

Zinsser Gardz

General Painting Application Kit

Zinsser Brush Cleaner & Restorer

Zinsser AllCoat Exterior Gloss (Water Based)

Zinsser Mould Killer & Remover

Zinsser AllCoat Exterior Matt (Water Based)

Zinsser AllCoat Exterior Satin (Solvent Based)

Zinsser AllCoat Exterior Gloss (Solvent Based)