Astroflame Low Profile Intumescent Duct Sleeves maintain the integrity of fire rated walls penetrated by plastic ventilation ducts.

The new Low Profile Duct Sleeve is a more compact version of the original Astro DS Duct Sleeve that offers the same industry leading fire performance.

The Low Profile sleeves have been independently fire tested to BS EN 1366-3 in a full scale partition system with Uncapped/Uncapped pipe/duct end configuration as required for ventilation systems and assessed for use in series around multiple duct penetrations.

In the event of a fire the intumescent material of the duct sleeve expands and crushes the plastic ventilation duct, closing off this route to the fire for up to 120 minutes. Fire test evidence is available for use within 30, 60 and 120 minute wall constructions including a variety of single and double layer plasterboard partitions.

Low profile duct sleeves need no additional metal cage or sleeving, can be slit for retro fitting over ductwork and access is only required from one side. The slim dimensions (typically 10-15mm thickness) and compressible nature of the intumescent material allows tight fitting against the ceiling soffit without the need to remove the top edge.

The duct sleeves are available to fit common sizes of rectangular and circular plastic ventilation ducts.

• CE Marked
• Compact Duct Sleeve up to 120 minute rating to EN 1366-3 : 2009
• Tested in accordance with EN 13501-1 : 2007
• Uncapped / Uncapped (Open | Open) fire tested as required for ventilation systems
• Suitable for use through a wide range of fire partition walls
• Reduced profile - 10-15mm thickness - allows installation at any position in the wall, even tight to the floor slab, without removing the top side
• Does not need metal sleeving
• Sleeve can be easily fitted and only requires access from one side
• Sleeve can be slit to allow retrofitting

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.