- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- 20 exclusive colours prior to the application of MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render.
- Suitable for use on GRC, X71, bonded paint, dash, roughcast, and render surfaces.
- Ready-mixed, flexible, and through-coloured penetrating primer.
- Highly polymer modified and water repellent.
- Offers extra coverage and high adhesive properties.
Product customisation
Don't forget to save your customization to be able to add to cartWethertex PP1 Pre-Prep Primer - Top-Quality Ready-Mixed Flexible Primer
Designed to control suction and ensure a solid key for subsequent coatings. It is through-coloured, making it ideal for a range of substrates, including GRC, X71, bonded paint, dash, roughcast, and render. Its high polymer modification and water-repellent properties make it an excellent choice for both professional and consumer use.
Application Instructions
- Ensure all surfaces are sound, clean, dry, and free from any material that may impair adhesion.
- Scaffolding must be independently tied to allow for uninterrupted application.
- PP1 Pre-prep Primer is supplied ready to use; however, it may require re-mixing using a suitable paddle mixer to regain the correct consistency.
- When applying with a roller, fully submerge the roller in the primer to ensure even application without spreading too thinly.
Storage and Tool Cleaning
- Store in a dry place at temperatures above 5ºC. Shelf life is 12 months from the date of manufacture.
- All equipment must be cleaned with clean white spirit immediately after use. Do not empty waste material into drainage systems.
Important Information
Application and drying conditions are critical. Do not apply if any of the following conditions are likely to arise during or in the first 24 hours following application:
- Frost is forecast, or excessive wet conditions.
- Relative Humidity is above 95%.
- Temperatures below -5ºC or above +25ºC.
- If the elevation is in direct sunlight.
- If the substrate is hot (above 30ºC) or below +1ºC.
Protect the product from heavy rain, direct sun, or wind in the first 24 hours after application. Sheeting the façade or scaffold is advised to protect against these conditions. Failure to meet these parameters can result in polymer film damage, wash off, discolouration, and potential failure.
Recommended Products
For optimal results, use Wethertex PP1 Pre-prep Primer in conjunction with MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render. These products are specifically designed to work together to provide superior performance and durability.
Health and Safety
For further information, always refer to the downloadable data sheet. Key safety information includes:
- UN Number: UN1263
- Contains Hydrocarbons, C9-C12, n-alkanes, isoalkanes, cyclics, aromatics (2-25%) and 2-Butoxyethanol.
- Safety precautions: Flammable liquid and vapour. May cause drowsiness or dizziness. Causes damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long-lasting effects.
Data sheet
- Manufacturer
- Wethertex
- Interior / Exterior Use
- Exterior Use
- For Use On
- GRC
Pebbledash
Render - Application Method
- Roller
Brush
Spray - Single, Two or Three Pack
- Single
- Pack Size
- 10L
- Coverage
- 8-9m²/L
- Min. Application Temperature
- (-5°C)
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Suitable For Use On
- GRC (Glassfibre Reinforced Concrete)
- Suitable For Use On
- Render
- Suitable For Use On
- Pebbledash
- Application Method
- Brush
- Application Method
- Spray
- Application Method
- Roller
- Manufacturer
- Wethertex
- Usages
- Water Resistant Coat
- Product Usage Type
- Primer
- Colour Family
- Off-White
- Colour Family
- Neutral
- Colour Family
- Beige
- Colour Family
- Blue
- Colour Family
- Pink
- Colour Family
- White
- Colour Family
- Cream
- Colour Family
- Grey
- Colour Family
- Brown
- Categorised As
- Masonry Primers
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Wethertex PP1 Pre-Prep Wash Coat Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Wethertex Textured Rollers
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below.