- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Premium quality wall coating available in 19 designer colours.
- Ideal for protecting and decorating exterior walls.
- Utilizes advanced Pliolite resin technology for superior adhesion and breathability.
- Rainproof within 20 minutes and applicable at temperatures as low as -5°C.
- Proven durability for over 40 years, ensuring long-term protection and low maintenance.
- Perfect for use on new and refurbishment projects, creating a beautiful and resilient finish.
- For the heavy textured version of this product please see Wethertex HD77 Pliolite Heavy Textured Wall Coating.
- Other colours are available on request, subject to extended lead times and additional cost.
Product customisation
Don't forget to save your customization to be able to add to cartWethertex LD77 Pliolite Light Textured Wall Coating
Designed to provide a robust and aesthetically pleasing finish for exterior walls. This high-performance coating ensures long-lasting protection against harsh weather conditions, offering both waterproofing and breathability. The advanced Pliolite resin technology incorporated in LD77 guarantees excellent adhesion, making it a reliable choice for various substrates.
Application Instructions
Proper application of Wethertex LD77 is essential to achieve the desired finish and longevity. Follow these detailed steps to ensure optimal results:
1. Preparation
Begin by preparing the substrate. For new base coats, apply directly to a suitably prepared surface. For refurbishment projects:
- Repair cracks and structural defects.
- Remove any loose, flaking, or brittle material.
- If there is evidence of organic growth, use Wethertex C10 Fungicidal Wash to clean the surface as per the instructions.
- Ensure the substrate is primed or base coated with a suitable product for the substrate type.
Apply beads and expansion joints as required by the substrate and British Standards. When needed, use Wethertex GRC Render as a base coat.
2. Mixing
Wethertex LD77 is supplied ready to use, but may need re-mixing using a suitable paddle mixer to regain the correct consistency for application. Ensure the product is thoroughly mixed before use.
3. Application
To avoid dampness and discolouration, do not apply the product below the damp proof course (DPC) or within 150mm of ground level. The application process involves two main steps:
Trowel Application
- Using a steel trowel, apply the coating smoothly and evenly to a thickness of about 1.5 - 2.5mm.
- Ensure even coverage across the surface.
Creating Texture
- Load a lamb’s wool roller generously with the coating.
- Apply with minimal pressure in short, slow strokes, covering small areas at a time.
- Move the roller from top to bottom, left to right, or right to left to create the desired effect.
4. Post-Application Care
After application, protect the coated surface from heavy rain, direct sun, or wind for at least 24 hours to prevent damage. Sheeting the façade or the scaffold is advised to protect against adverse weather conditions. Ensure the substrate temperature remains between -5°C and +25°C, and that relative humidity is below 85% during application and curing.
Benefits
- Long-lasting protection against weather damage, reducing maintenance costs.
- Allows the building to breathe naturally, preventing moisture build-up.
- Available in 19 designer colours to enhance the visual appeal of your property.
- Proven durability for over 40 years, ensuring a lasting investment.
- Can be applied in a wide range of temperatures, ensuring flexibility during application.
Why Choose Wethertex LD77
Choosing Wethertex LD77 means investing in a high-quality, reliable wall coating that not only beautifies your property but also protects it from the elements. The superior Pliolite resin technology ensures excellent adhesion and durability, making it a preferred choice for both residential and commercial properties. The product’s proven track record of over 40 years stands as a testament to its quality and effectiveness.
Restrictions and Limitations
Wethertex LD77 should not be applied below the damp proof course (DPC) or within 150mm of ground level to avoid dampness and discolouration. It is also crucial to avoid application if frost is forecast or if conditions are excessively wet. Ensure the application temperature is between -5°C and 25°C, and that relative humidity is below 85% during the application and curing process. Protect the coated surface from heavy rain, direct sun, or wind for at least 24 hours after application.
Recommended Products
For optimal results, consider using Wethertex GRC Render as a base coat for mixed or unusual substrates. The Wethertex C10 Fungicidal Wash is recommended to remove organic growth before applying the LD77 coating. These products work synergistically to enhance the performance and longevity of the Wethertex LD77 coating.
Health and Safety
Refer to the downloadable data sheet for comprehensive health and safety information. Wethertex LD77 contains hazardous substances and should be handled with care. The product is classified as flammable and may cause drowsiness or dizziness. Ensure adequate ventilation during application and use personal protective equipment as required. The UN number for transportation is UN1263.
Data sheet
- Manufacturer
- Wethertex
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Exterior Walls
- Application Method
- Roller
Trowel - Sheen
- Textured
- Colour
- Cream / Neutral Shades
- Single, Two or Three Pack
- Single
- Coverage
- Approx. 15m² per unit
- Min. Application Temperature
- (-5°C)
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Exterior Walls
- Finish
- Textured
- Application Method
- Trowel
- Application Method
- Roller
- Manufacturer
- Wethertex
- Usages
- Waterproofing
- Product Usage Type
- Topcoat
- Product Range
- Pliolite
- Colour Family
- White
- Colour Family
- Beige
- Colour Family
- Green
- Colour Family
- Brown
- Colour Family
- Off-White
- Colour Family
- Grey
- Colour Family
- Blue
- Colour Family
- Pink
- Categorised As
- Textured Masonry Paints
- Seasonal
- Cold Weather
Andy on 2021-08-15 16:33:46 | Question:
Can the LD77 be applied direct with just a textured roller, looking to apply on top of some rendering that doesn't look very smooth. |
Answer from Rawlins’ Technical Team:
This product should be trowel applied then rollered. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Wethertex LD77 Pliolite Light Textured Masonry Paint is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Wethertex Textured Rollers
Wethertex S.A. Quicklock Textured Roller sleeves and frames for applying products such as Wethertex HBS Flex-Coat Hi-Build Coating. Choose from individual 7" and 10" roller sleeves and frames, or sets from the menu below.
Wethertex X71 Polymer Levelling Base Coat
High-performance polymer-modified cement-based waterproofing levelling base coat. Suitable for application on concrete, clay, lightweight block, brick, dash, and roughcast render. Can be applied by hand or spray, offering excellent workability and finishing time properties. Effective for use in low temperatures, ensuring versatile...
Wethertex GRC Fibre Glass Reinforced Polymer Levelling Base Coat
High-performance fibre reinforced base coat, available in grey. Suitable for concrete, clay, lightweight block, brick, dash, and roughcast render. Excellent workability and finishing properties, even in low temperatures. Can be applied by hand or spray; ideal for professional use. Provides long-term protection and low maintenance with...
Wethertex HD77 Pliolite Heavy Textured Masonry Paint
Heavy-textured wall coating available in 19 designer colours. Ideal for use on exterior surfaces, including render, brick, and concrete. Advanced Pliolite resin technology for long-lasting durability. Highly breathable and waterproof for optimal wall protection. Rainproof within 20 minutes of application. Application possible in...