- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Premium quality, ready-to-use thin-coat render available in 19 designer colours.
- Suitable for GRC, X71, or a suitable basecoat substrates.
- Advanced Pliolite Resin Technology for excellent adhesion and breathability.
- Application down to -5°C and rainproof in 20 minutes.
- Long-term protection against weather damage with over 40 years of proven durability.
- Low maintenance, highly flexible, and crack-resistant.
Product customisation
Don't forget to save your customization to be able to add to cartDescription
Wethertex AX1 Pliolite Thin Coat Render - High-Performance Ready-To-Use Through-Coloured Exterior Render
This premium-quality render utilises advanced Pliolite Resin Technology, offering excellent adhesion, breathability, and durability. Available in 19 stylish colours, it provides a beautiful, long-lasting finish that protects your property from extreme weather conditions.
Application and Uses
AX1 Pliolite Thin Coat Render is ideal for use on GRC Fibre Glass Reinforced Basecoat, X71 Polymer Levelling Basecoat, and other suitable substrates. It is designed to be applied with a stainless steel trowel or suitable spray equipment, ensuring a consistent and smooth finish. The render is rainproof in just 20 minutes and can be applied in temperatures as low as -5°C.
Preparation and Priming
Before application, ensure that all surfaces are sound, clean, and dry. Apply Wethertex PP1 Primer over the substrate to enhance adhesion. It is recommended to complete a test panel for approval before proceeding with the main application.
Application Instructions
- Do not apply to a wet substrate.
- Avoid application if frost, excessive wet conditions, or direct sunlight are expected within 24 hours.
- Use a plastic float to achieve the desired finish, working in small circular motions.
- Apply continuously to prevent day joints and ensure a uniform finish.
Health and Safety
Always refer to the Wethertex AX1 Safety Data Sheet for detailed health and safety information. This product is classified under various hazard statements including flammable liquid and vapour (H226), and harmful to aquatic life with long-lasting effects (H412). It is important to follow all recommended precautions and wear appropriate protective equipment.
Storage and Maintenance
Store AX1 Pliolite Thin Coat Render in a cool, well-ventilated area, away from sources of ignition. Ensure the container is tightly closed when not in use. The product has a shelf life of 12 months from the date of manufacture when stored properly.
Why Choose Wethertex AX1?
Choosing Wethertex AX1 Pliolite Thin Coat Render ensures your property is protected with the best quality wall coating technology available. Its excellent adhesion, breathability, and long-term durability make it an ideal choice for enhancing and safeguarding your property. For more detailed information, always refer to the downloadable data sheet.
Health and Safety
UN Number: UN1263
AX1 Pliolite Thin Coat Render is classified as a flammable liquid and vapour, and it may cause damage to organs through prolonged or repeated exposure. It is harmful to aquatic life with long-lasting effects. This product does not contain Diisocyanates.
Product Details
5414-884728
Data sheet
- Manufacturer
- Wethertex
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- Application Method
- Trowel
Spray - Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 25KG
- Coverage
- Approximately 10m2 per unit
- Min. Application Temperature
- (-5°C)
- UN Number
- UN1263
- Colour(s)
- Standard Colours
- Base Type
- Solvent-Based
- Suitable For Use On
- Exterior Walls
- Application Method
- Spray
- Application Method
- Trowel
- Manufacturer
- Wethertex
- Usages
- Waterproof Finish
- Product Usage Type
- Render
- Colour Family
- Neutral
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Off-White
- Colour Family
- White
- Categorised As
- Finishing Renders
- Seasonal
- Cold Weather
Questions
Question about the product
johann
on
2024-07-18 14:03:47
| Question:
is this product suitable to be used on a costal front property |
Answer from Rawlins’ Technical Team:
Assuming the substrate is clean, dry, sound and prepared as detailed in the technical datasheet, this product is suitable for application in coastal areas. If applying over an existing coating, we'd recommend to apply a test area firstly to check for compatibility and adhesion, prior to coating the full surface. | |
|
Andrew Carnell
on
2022-07-19 09:57:53
| Question:
Can this product be used over existing sand and cement render to smooth over sponge marks left by plasterer |
Answer from Rawlins’ Technical Team:
This is a trowel applied thin coat render, this is not designed to hide imperfections in the substrate, the depth of these marks will depend if it will mask these, but we would recommend they should be addressed prior to application. | |
|
John chalcraft
on
2022-06-27 11:53:48
| Question:
What coverage do I get from 25kg of the thin coat render . Thanks |
Answer from Rawlins’ Technical Team:
The coverage rate for 25kg is approximately 10m². | |
|
David
on
2021-10-27 13:49:04
| Question:
Can this be used to repair old, cracked render on an exterior chimney stack to make it watertight? Water ingress seems to be coming through the mortar in the bricks underneath the render and penetrating into the plaster in the loft. |
Answer from Rawlins’ Technical Team:
This product can be applied to compatible substrates once the necessary repairs to the cracked render have taken place. Loose or flaking material must be removed, cracks repaired then Wethertex X71 1 Polymer Levelling Base Coat should be applied to reinforce and waterproof the repairs prior to application. This a waterproof system but it will not rectify any structural issue that is causing the water ingress. | |
|
EILEEN MURPHY
on
2021-08-18 16:55:27
| Question:
AN i USE IT BELOW THE dpc COURSE TO COVER BADLY SCARRED BRICK FACE? THANKS EILEEN |
Answer from Rawlins’ Technical Team:
No, to avoid dampness and discolouration rendering should be avoided below DPC or within 150mm of ground level. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Wethertex AX1 Pliolite Thin Coat Render is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Wethertex PP1 Pre-Prep Wash Coat Primer
20 exclusive colours prior to the application of MP44 Spray Wall Coating or AX1 Pliolite Thin Coat Render. Suitable for use on GRC, X71, bonded paint, dash, roughcast, and render surfaces. Ready-mixed, flexible, and through-coloured penetrating primer. Highly polymer modified and water repellent. Offers extra coverage and high adhesive...
Price
£137.00
(incl. VAT)
In Stock and Available for Delivery
Wethertex X71 Polymer Levelling Base Coat
High-performance polymer-modified cement-based waterproofing levelling base coat. Suitable for application on concrete, clay, lightweight block, brick, dash, and roughcast render. Can be applied by hand or spray, offering excellent workability and finishing time properties. Effective for use in low temperatures, ensuring versatile...
Price
£31.04
(incl. VAT)
In Stock and Available for Delivery