Please note should you be unsure whether this product/system is suitable for your requirements please download and complete the 'Thermoguard Wood Enquiry Form' and return by email to [email protected]

Upon receipt our team will respond within 24-48 hours with specification/advice on our best suggestion for your project. If you have any questions regarding this process consult our technical department on 0113 2455450 (option 2).

Intumescent and Water Vapour Action

When exposed to fire:-

• Thermoguard Smoke & Flame Retardant (SFR) Dualcoat releases a vapour to suppress toxic gasses & prevent flamespread
• Thermoguard Timbercoat expands to create a barrier, insulating wood from heat and oxygen to prevent wood burning & fire penetration

Specification & Application

Prepare & apply according to manufacturer’s instructions

• 1 coat of Thermoguard Timbercoat
• 1 coat* of Thermoguard Smoke & Flame Retardant (SFR) Dualcoat

*Apply 2 coats of Thermoguard Smoke & Flame Retardant (SFR) Dualcoat for external or damp areas. 2 coats may also be required for strong/dark colours - Thermoguard Timbercoat will be provided in a suitable undercoat shade to aid topcoat opacity unless instructed otherwise.

Available as a system pack -  please see Thermoguard Timbercoat BS Class 1/0 & EN Class B System.

For fire protection to doors, see Door Upgrade Products

Please note: Timber must be clean and thoroughly dry prior to application (maximum 18% moisture content). Any gaps should be sealed with Thermoguard Intumescent Mastic. Fire should be prevented from accessing unprotected wood surfaces and for external applications it is recommended wood has been sealed on the reverse face to stop water ingress.

NOT suitable for the topside of floor surfaces that will be trafficked/walked on.

Please always refer to the downloadable PDF's from the "Data Sheets" tab for more information on:

• Technical Data
• Suitable Surfaces and Substrates
• Substrate Preparation
• Application Instructions
• Suitable Primers/Topcoats (where applicable)
• Drying Times
• Application Equipment
• Health & Safety Information
• Warranty

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.