- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Designed and tested to seal service penetration apertures containing plastic and metallic pipes with insulation or cables. They are developed to provide a high volume expansion and pressure seal during a fire. The ultra thin design of the collars means the collar shell can give a depth of 30mm and 40mm ensuring that they can be installed into the tightest of locations. Can be installed on flexible wall, rigid wall, rigid floor constructions and in Stopseal Batiseals.
- Tested with a wide range of services, including plastic pipes, cables, insulated non-combustible pipes
- Allows thermal and mechanical movement of pipe
- Halogen free, contains no asbestos or ceramic and is environmentally friendly
- Not effected by fungus, vermin, rodents or moisture
- EI120 and EI240 tested results to EN1366-3
- Conditioned to Type X: -20℃ to +70℃ with accordance with EOTR 024 and Etag 026
- To reinstate fire resistance through walls and floors
- To seal multi-service penetrations and cable bunches
- Around combustible pipes from 32-250mm diameter
- Angled combustible pipes through walls
- Assumed working life 25 years
- Easy fixing method using common fixings or ‘pigtail’ screws
PipeBloc PCP Collars are designed and tested to seal service penetration apertures containing plastic and metallic pipes with insulation or cables. They are developed to provide a high volume expansion and pressure seal during a fire. The PipeBloc PCP Collars offers EI120 and EI240 tested results to EN1366-3, the maximum diameter available being 250mm. The ultra thin design of the collars means the collar shell can give a depth of 30mm and 40mm ensuring that they can be installed into the tightest of locations. PipeBloc PCP Collars can be installed on flexible wall, rigid wall, rigid floor constructions and in Stopseal Batiseals.
Used around combustible pipes to form a penetration seal and to reinstate the fire resistance performance of wall and floor constructions, where they have been provided with apertures for the penetration of combustible pipe services.
PipeBloc PCP Collars includes an intumescent component incorporated into a mild steel case to close any gaps and to provide a closure of combustible pipes when heated to prevent the passage of fire.
Supplied in assembled form, without fixings. The collar is wrapped around the pipe at the soffit or both faces of walls, depending on application.
The specific elements of construction that the system PipeBloc PCP Collars may be used in as follows.
- Suitable for use with flexible walls with > 100mm minimum thickness, rigid wall with > 100mm minimum thickness and rigid floors with 150mm minimum thickness also within the Stopseal Batt system
Features & Benefits
- Allows thermal and mechanical movement of pipe
- Halogen free, contains no asbestos or ceramic and is environmentally friendly
- Ease of fixing to suit location - 5 fixing types available
- Not effected by fungus, vermin, rodents or moisture
- Conditioned to Type X: -20℃ to +70℃ with accordance with EOTR 024 and Etag 026
- To reinstate fire resistance through walls and floors
- To seal multi-service penetrations
- To seal cable bunches
- Around combustible pipes from 32-250mm diameter
- Angled combustible pipes through walls
- Assumed working life 25 years
- For internal use
- High performance intumescent
- Easy fixing method using common fixings or ‘pigtail’ screws
- Tested with a wide range of services, including plastic pipes, cables, insulated non-combustible pipes
- Tested within the Stopseal Ablative Batt System
- Tested in accordance with EN1366-3:2009 – Fire Resistance – Penetration Seals
- Classified in accordance with EN13501-2 – Fire Resistance
- CE Marked – ETA 15-0489
- Conditioned in accordance with EOTA TR024 – X Type
- Certifire Accreditation – CF5367
- ULEU Accreditation
- UAE Certificate of Compliance
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Product Range
- PipeBloc
- Fire Rating
- 120 Minutes
- Fire Rating
- 240 Minutes
Questions
Question about the product
jo on 2021-09-28 08:29:11 | Question:
are these collars tested for angled pipes through a wall if the collars are loose by about an inch? |
Answer from Rawlins’ Technical Team:
FSI have done some testing with these collars upto an angle of 45 degrees. Collars larger than the diameter of the pipe may be required to account for the angle required. But these collars do need to fit flush to the pipe. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
FSi PipeBloc PCP Intumescent Pipe Collars is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT