Tor Torrex Ultimate AG Finish, a flame retardant anti-graffiti finish for use as the final coat of the Torrex Ultimate AG System. Provides an outstanding non-sacrificial anti graffiti finish that is extremely durable and easily cleaned.

For use over existing multi-layered painted surfaces to reduce the spread of flame in the event of a fire.

The Torrex Flameshield Ultimate System converts the Warrington Fire Research Centre Class 4 “blue board” to Class 0 when tested to BS476 Parts 6 and 7.

Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.

Features & Benefits

• To be applied over the Torrex Ultimate Intermediate.
  • Ensure the Torrex Ultimate Intermediate is dry before application.
• Part of the Torrex Ultimate AG System
• Two-pack solvent-free epoxy siloxane
• Roller application
• 100% volume solids
• Good coverage up to 15 square metres per litre
• Very low VOC
• Available in 2,000+ colours, inc. RAL, RAL Design, BS, NCS & NCS 2050 colours
• Limitations:
  • Will only achieved fire upgrading properties if applied as part of the Torrex Ultimate AG System.
  • Adhesion checks must be carried out before specification of the system
  • Do not apply and/or allow to dry at temperatures below 5°C
  • Do not apply if condensation is likely to occur
  • The material must be applied at the specified spreading rate
  • Once the product has been mixed keep tin covered when not in use to prevent skinning

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.