- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Tor Torlife WB Satin Finish, a high performance water based anti-graffiti coating for use as the finish coats of the Torlife WB System. Provides a long life, easy cleaned permanent anti-graffiti system for public access areas with an extended redecoration cycle.
- Must only be applied to surfaces which have been primed with Aqualife WSE Primer EP131
- 1,500+ colours in RAL, BS, NCS and the new NCS 2050 shades
- Limitations apply
Product customisation
Don't forget to save your customization to be able to add to cartTor Torlife WB Satin Finish, a high performance water based anti-graffiti coating for use as the finish coats of the Torlife WB System. Provides a long life, easy cleaned permanent anti-graffiti system for public access areas with an extended redecoration cycle.
The Torlife WB System is Class "O" fire rated.
Dries quickly to provide an extremely tough finish with outstanding colour fastness that is highly chemically resistant and can be easily and repeatedly cleaned.
Refer to the Product Data Sheet (available in the "Data Sheets" tab) for application and technical details.
Features & Benefits
- Dries quickly to provide an extremely tough finish with outstanding colour fastness that is highly chemically resistant and can be easily and repeatedly cleaned
- Must only be applied to surfaces which have been primed with Aqualife WSE Primer EP131
- Two pack pigmented water based polyurethane
- Water-based
- Brush or roller application
- Easy mixing; base and activator supplied in correct proportions
- 36% volume solids
- Very low VOC
- Good coverage of up to 10 square metres per litre
- 1,500+ colours in RAL, BS, NCS and the new NCS 2050 shades
- Limitations:
- Torlife WB Satin Finish must be applied at the specified spreading rate
- Do not apply and/or allow to dry at temperatures below 5℃
- Do not apply if condensation is likely to occur
- Drying times will be extended if temperature falls below 10℃
- Class “O” rating is valid only when the Torlife WB System is applied over a non-combustible substrate
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions . We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Data sheet
- Manufacturer
- Tor
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Water / Solvent Based
- Water
- For Use On
- Surfaces primed with Tor Aqualife TP WSE Primer
- Application Method
- Brush, Roller
- Sheen
- Satin
- Colour
- Fully Tintable
- VOC Levels
- Ultra-Low (5-49 g/l)
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Interior/Exterior Use
- Interior Use
- Touch Dry (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- Min: 4 hours; Max: 7 days
- Pot Life (at 20°C)
- 4 hours
- Coverage
- 10 square metres per litre
- Recommended Thinner/Cleaner
- Water
- Solids by Volume
- 36%
- Shelf Life (from date of manufacture)
- 3 years
- Layer Thickness
- 36 microns dft from 100 wft
- Hard Dry
- 8 hours
- Base Type
- Water-Based
- Suitable For Use On
- Compatible Paints
- Finish
- Satin
- Application Method
- Brush
- Application Method
- Roller
- Components
- 2K
- Product Usage Type
- Topcoat
- Product Range
- Torlife
- Product Range
- Tor Graffiti & Hygiene
- Colour Family
- Purple
- Colour Family
- Grey
- Colour Family
- Off-White
- Colour Family
- Blue
- Colour Family
- White
- Colour Family
- Brown
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Orange
- Colour Family
- Beige
- Colour Family
- Yellow
- Colour Family
- Green
- Colour Family
- Black
- Colour Family
- Red
- Colour Family
- Neutral
- Colour Family
- Pink
- Colour Family
- Cream
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Tor Torlife WB Satin Finish is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT