- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An opaque, medium build, decorative, pigmented semi gloss protective wood coating suitable for finished or rough-sawn timber.
- Opaque finish
- BBA tested performance
- Over 5 years life expectancy
- Very quick drying, re-coatable within 2 hours
- Water repellent but allows timber to breathe
- Suitable for use with pre-treated and pre-stained timber
Product customisation
Don't forget to save your customization to be able to add to cartArchitectural™ (water based) opaque finish is a decorative microporous, flexible coloured coating which gives a low sheen finish to timber. Resistant to mould growth, Architectural™ (water based) also protects timber from harmful UV light. The wood stain penetrates the surface of the timber giving perfect adhesion so no primer is required and the surface will not flake or crack. Architectural™ (water based) requires very little maintenance to preserve its colour and strength.
Features
• Opaque finish
• BBA tested performance
• Over 5 years life expectancy
• Very quick drying, re-coatable within 2 hours
• Water repellent but allows timber to breathe
• Suitable for use with pre-treated and pre-stained timber
Data sheet
- Manufacturer
- Solignum
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Water
- For Use On
- Unprepared, Prepared, Timber
- Application Method
- Brush, Roller
- Sheen
- Satin
- Colour
- Standard / Ready Mixed
- VOC Levels
- Low (50-149 g/l)
- Single, Two or Three Pack
- Single
- Pack Size
- 5L
- Coverage
- 12m 2 per litre per coat
- Touch Dry
- 2 Hours
- Recommended Wet Film Thickness
- 80 microns wet
- Base Type
- Water-Based
- Suitable For Use On
- Unprepared Timber
- Suitable For Use On
- Timber
- Suitable For Use On
- Prepared Timber
- Finish
- Satin
- Application Method
- Roller
- Application Method
- Brush
- Product Usage Type
- Woodstain
- Product Range
- Architectural
- Fastest Delivery
- Next Working Day
- Type of Wood Finish
- Wood Paint
- Suitable For
- Exterior Windows & Doors
- Suitable For
- Exterior Cladding
- Suitable For
- Fences, Sheds & Summerhouses
- Suitable For
- Barns & Stables
- Colour Family
- Copper
- Colour Family
- Quickthorn
- Colour Family
- Grey
- Colour Family
- Rosewood
- Colour Family
- Blue
- Colour Family
- Chestnut
- Colour Family
- Beech
- Colour Family
- Brown
- Colour Family
- Willow
- Colour Family
- Black
- Colour Family
- Laburnum
- Colour Family
- Anthracite Grey
- Colour Family
- Ebony
- Colour Family
- Alder
- Colour Family
- Green
- Colour Family
- Teak
- Colour Family
- Red
- Colour Family
- Maple
- Colour Family
- Yellow
- Colour Family
- Jacobean
- Categorised As
- Barn and Wooden Cladding Paints
eileen oliver on 2016-09-21 14:52:07 | Question: I would like to buy Architectual Solignum. It is to be used on treated new gate posts. Which is the best for this, water based and solvent based please.
Do you do ebony in 2.5ltr. |
Answer from Rawlins’ Technical Team: Both products will be fine for this, the solvent grade may give slightly longer life before first recoat required however both are good durable coatings. You haven't stated what type of timber the posts are made from so we couldn’t say if one might be slightly better for a particular timber type. The water based product is available in a 2.5 litre only in ebony, the solvent grade 1 litre and 5 litres. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Solignum Architectural (Water Based) is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT