- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in grey and red, can or aerosol.
- Two-pack anti-rust primer for new or slightly rusted surfaces.
- For steel surfaces, provides and enhance protection against corrosion.
- Recoatable after 2 hours; fast drying and lead- and chromate-free.
- 5-year shelf life if stored properly.
Description
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion - Fast Drying Steel Primer
CombiPrimer Anti-Rust Primer is a high-quality, fast-drying primer designed to protect steel surfaces from corrosion. This product, available in grey and red, is ideal for use on new or slightly rusted surfaces and is perfect for both industrial and professional applications. CombiPrimer is lead- and chromate-free, ensuring a safer application process.
Applications
This primer is suitable for use on steel surfaces, providing enhanced protection against corrosion. It is especially effective when applied to new or slightly rusted steel, ensuring a robust barrier against further rusting. CombiPrimer can be applied using a brush, roller, or air-atomised spray, making it versatile for various project requirements.
- New or slightly rusted steel surfaces
- Interior applications
- General industrial exposures
Usage Instructions
To ensure optimal results, follow these instructions:
- Clean the surface thoroughly, removing grease, oil, and other contaminants.
- Remove loose rust and mill scale by scraping and wire brushing.
- Sand intact coatings to roughen the surface slightly.
- Stir the primer thoroughly before use.
- Apply at temperatures between 5°C and 35°C with relative humidity below 85%.
- For brush application, thin with up to 10% Rust-Oleum Thinner 7301. Use natural bristle brushes for best results.
- For roller application, use medium nap rollers and thin with up to 10% Rust-Oleum Thinner 7301.
- For air-atomised spray, thin with 10-20% Rust-Oleum Thinner 7301.
Restrictions and Limitations
Do not apply CombiPrimer in conditions of high humidity (above 85%) or at temperatures below 5°C. Avoid using on surfaces that are not clean or dry. Do not apply thick coats that exceed the recommended dry film thickness, as this may affect the drying process and adhesion.
Recommended Products
For the best results, follow up with CombiColor Original for a topcoat. This combination provides a durable and aesthetically pleasing finish.
Health and Safety
- UN Number: 1950 (Aerosol), 1263 (Can).
Consult the Safety Data Sheet for detailed safety information. Key safety points include:
- Flammable liquid and vapour; keep away from heat, sparks, open flames, and hot surfaces.
- May cause drowsiness or dizziness; use only outdoors or in well-ventilated areas.
- Toxic to aquatic life with long-lasting effects; avoid release to the environment.
Product Details
562-73099
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Brush
Roller
Spray - Sheen
- Matt
- Single, Two or Three Pack
- Single
- Pack Size
- 400ml Aerosol
750ml
2.5L - Dry to Handle (at 20°C)
- 2 hours
- Dry to Recoat (at 20°C)
- 2 hours
- Fully Cured (at 20°C)
- 7 days
- Coverage
- 12m² per litre / 2m² per aerosol
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Density
- 1,21
- Solids by Volume
- 44,8%
- Heat Resistance (up-to)
- 120°C (dry heat)
- VOC
- 424 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 1 hour (brush) / 15 mins (aerosol)
- Recommended Dry Film Thickness
- 35 µm
- Recommended Wet Film Thickness
- 80 µm
- UN Number
- UN1263
- Consumption
- 12.8m²/l at 35µm dry
- Base Type
- Solvent-Based
- Base Type
- Alkyd
- Suitable For Use On
- Steel
- Suitable For Use On
- Compatible Existing Coatings
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Anti-Corrosive
- Product Usage Type
- Primer
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Colour Family
- Red
- Dry to Recoat (@ 20-25°C)
- 2 hours
Questions
Question about the product
Cameron Irving
on
2024-10-09 11:00:37
| Question:
I have just re-roofed my car port with Plastisol coated sheet steel. I am keen to avoid the cut edge corrosion which plagued the previous roof sheets especially at the gutter edge. Can you please advise which product would be best to paint onto the cut edges to inhibit corrosion in the future? Many thanks, Cameron Irving |
Answer from Rawlins’ Technical Team:
For application to new plastisol surfaces, we would usually advise leaving them to weather for at least a year (if not longer), before painting. Therefore, you could consider applying Rust-Oleum Noxyde Plus or Noxyde Peganox, as these products tend to provide better protection from cut-edge corrosion, however there is the likelihood of some delamination occuring of any applied coating. Waiting at least 12-18 months for the plastisol to have weathered will give a better base for these products to perform and protect from cut-edge corrosion far better. | |
|
Thomas Ennels
on
2024-09-30 18:08:16
| Question:
Does this work on fibreglass? Also what colour is best to pick from out of the grey and red if I am painting light blue on top? |
Answer from Rawlins’ Technical Team:
No, this primer is only recommended for application to steel surfaces. Assuming the fibreglass is clean, dry, sound, lightly abraded and prepared as detailed in the techncial datasheet, and isn't for application to a fibreglass roof, you could consider Rust-Oleum CombiColor Multi-Surface. Available in your choice of 4400+ RAL, BS & NCS Colours. We'd recommend applying to a small test area to check for compatibility and adhesion prior to full application. | |
|
Darren
on
2024-03-13 22:42:51
| Question:
Can combiprimer be used on clean new aluminium surfaces? |
Answer from Rawlins’ Technical Team:
No, but Rust-Oleum 3302 CombiPrimer Adhesion Primer can be used to prime bare, clean, dry aluminium. | |
|
Jerome Perkins
on
2023-05-07 14:14:16
| Question:
I'm intending to paint my VW T3 using Combicolor paint. However I need to do some bodywork repairs first. What is the best way of protecting the areas I've worked on before I do the whole vehicle? They are small areas so using a roller would be wasteful. Use a brush and then sand it down prior to the final coats? I intend to use the method outlined on the Club 80-90 website for the final coats. |
Answer from Rawlins’ Technical Team:
If the vehicle is not being left inside till it is painted fully, we would recommend any area repaired is primed and painted with Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion followed by Rust-Oleum CombiColor Original. Then these areas can be prepared along with the other painted areas when a full repaint is undertaken. | |
|
Sue
on
2019-06-18 13:56:22
| Question:
What is the coverage of CombiPrimer Anticorrosion? |
Answer from Rawlins’ Technical Team:
12.8m² per litre at 35 µm dry. | |
|
Sam
on
2018-06-04 15:16:28
| Question:
I'm painting a narrowboat at the moment using CombiColor. How long would you recommend I leave the undercoat before applying masking tape? |
Answer from Rawlins’ Technical Team:
7 days at 20°C/50% r.h. | |
|
Roland Trickett
on
2018-01-29 14:42:35
| Question:
We have 2 steel pillars that have been painted in the past with unknown paint. The idea was to strip down to metal and apply Rustolene. Can you give me name of a stripper and paint to apply from your stock. Pillars are about 27inches in circumference and 90 inches tall. |
Answer from Rawlins’ Technical Team:
Rust-Oleum Nr.1 Green Paint Stripper would be our suggestion for removing the existing paint, but if the requirement is to just 're-paint' then providing the existing paint is a normal (i.e. not fire retardant, etc.) and well adhered, then it could be just prepared by cleaning and abrading to provide a key and then over painted with something like Rust-Oleum CombiColor, this would negate the need to strip. | |
|
MR Adams
on
2018-01-03 16:26:39
| Question:
Can Combicolour be used for steel beams exposed to the outside. and if so ..how long will the coating last? |
Answer from Rawlins’ Technical Team:
Rust-Oleum CombiColor is definitely OK to be used externally on steel, however the exact exposure conditions and degree of surface cleanliness (and profile) at the point of application will be the two biggest factors affecting the overall life expectancy of the coating. Assuming preparation is carried out in accordance with the manufacturers data sheets and one coat of Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is applied followed by two coats of Rust-Oleum CombiColor we would expect to see a life expectancy of 3-5 years. | |
|
Mr moore
on
2016-02-16 16:58:23
| Question:
Can Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion be used outside if overcoated with combicolour gloss? |
Answer from Rawlins’ Technical Team:
Yes, Rust-Oleum CombiPrimer can be used on interior and exterior projects and must be overcoated with Rust-Oleum CombiColor to complete the system. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Rust-Oleum 7301 CombiColor Thinner
A clear liquid thinner, ideal for use on the Rust-Oleum CombiColor product range. Provides good thinning properties for various applications. Specially formulated for air-atomised spraying CombiColor topcoats.
Price
£14.94
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum CombiColor Original
4,400+ colours available. Primer and topcoat in one. For rust, bare metal and primed steel surfaces. Covers 10.3m² per litre. Lead and chromate free. Usable down to 5°C. Buy A Paint Colour Sample
Price
£22.94
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum 3302 CombiPrimer Adhesion Primer
Available in a transparent blue finish. Highly effective adhesion primer for ensuring smooth surfaces are coatable. For galvanised steel, stainless steel, aluminium, copper, glass, and porcelain. High coverage of 50 m²/L. Recoatable after just 30 minutes.
Price
£8.30
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery
Surface Preparation Kits for Steel
These surface preparation kits for steel have been created to help provide customers with an easily accessible bundle of tools to aid in the preparation of steel surfaces in accordance with ISO 8501-1 (St2/3) and SSPC (SP 2/3). Please click here for important information about these kits. Kit Contents: SET 1 (Hand Tools) 1 x Rust-Oleum...
Price
£26.45
(incl. VAT)
In Stock and Available for Delivery