Hensel Hensotop SB (formerly Hensotop 84) is a solvent-based single component, halogen-free and fast-drying top coat for Hensotherm fire protection coatings for indoor and outdoor use. For use on interior and exterior wood or steel as part of a system.

It provides protection from moisture and other environmental influences, and can be used over coatings including Hensel Hensotherm 2 KS White Interior and Hensel Hensotherm 2 KS Black Anthracite Interior on wood as a protective and decorative top coat.

Hensel Hensotop SB is available in a wide range of colours including RAL shades. Special colour shades including Sikkens, NCS or samples are available on request – with a minimum order quantity of 10kg. Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for further details.

Please Note: If steel surfaces are regularly exposed to intense heat/high temperatures of above + 45 °C, do not use dark colours as top coating.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Notes

Features & Benefits

   
• Available in a wide range of colours including RAL shades
• Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg
• Provides protection from moisture and other environmental influences
• Dust Dry after approx. 45 minutes @20°C - Dry to recoat after approx. 24 hours
• Available in Silk-Matt - Gloss level varies depending on the colour shade
• Please Note: If steel surfaces are regularly exposed to intense heat/high temperatures of above + 45 °C, do not use dark colours as top coating
• Hensotop top coats offer the possibility of coloured design, protection against moisture and should be applied when the surfaces, during the usage, are exposed to environmental influences, regular cleaning and similar external influences

Notes

• Must only be applied after the Hensotherm fire protection has fully dried (approximately 24 Hours @20°C and after a positive fingernail test)
• If Hensotop SB must be applied out of different batches, mix both materials (of the same colour shade) together before application
• Colour shades containing metallic pigments may change by thinning with water or by application by brush or roller
• The temperature of the steel surface and the ambient temperature must remain between +15°C & +25°C during the coating procedure. Do not apply below +10°C or above +35°C

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.