- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in dark grey.
- Waterproof elastic paint with crack-bridging fibres.
- For roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, and pipes.
- Excellent adhesion to many substrates.
- Can be applied in all weather conditions.
Description
Rust-Oleum Fillcoat Fibres Repair Kit - Elastic Multi-Surface Waterproofing
This waterproofing solution offers an instantly waterproof elastic paint, enhanced with crack-bridging fibres for use on various structures such as roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, and pipes. Its bitumen-free formula ensures superior UV resistance and hydrophobic properties, making it suitable for a wide range of outdoor applications. The product's excellent adhesion to numerous substrates and its versatility in all weather conditions make it a reliable choice for professionals.
Application and Usage
Before application, ensure surfaces are free from dust, mud, grease, moss, and withered leaves. Clean the areas to be repaired with a hard broom and sponge. The product can be directly applied to bituminous substrates, hard PVC, polyester, zinc, aluminium, glass, and tiles. For porous materials such as concrete, stone, and wood, dry and pre-treat the surfaces with Primer 44HS. In cases of repeatedly repaired spots or significant cracks, apply the product crosswise over the cracks for optimal results.
Important Notes
This product should not be applied to polystyrene insulation or new concrete (concrete must be at least 2 years old). Avoid using it as a priming coat under Dac Hydro Alu. Always refer to the downloadable data sheet for more detailed information and application guidelines.
Recommended Products
- Dacfill - For recoating surfaces treated with this waterproofing solution.
- Dacfill HZ - Ideal for high-performance waterproofing needs.
Health and Safety
- UN Number: UN1263
- Poses a chronic hazard to aquatic life (H412) and may cause skin dryness or cracking upon repeated exposure (EUH066). The product contains N,N-Ethylenebis(12-hydroxyoctadecanamide) and isobutyl methacrylate, which may produce an allergic reaction. Contains no Diisocyanates.
Product Details
587-231112
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Consumer Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- PVC
Polyester
Zinc
Aluminium
Glass
Concrete
Stone
Wood - Application Method
- Brush
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
- Dry to Recoat (at 20°C)
- 3 - 14 days with the same product. 6 weeks with a paint
- Coverage
- 1m² per kit
- Density
- 1,03
- Solids by Volume
- 43 %
- VOC
- 485 g/l
- Shelf Life (from date of manufacture)
- 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C.
- Touch Dry
- 2 hours (waterproof instantly)
- UN Number
- Not regulated
- Consumption
- 1 coat of 1,5 l/m²
- Suitable For Use On
- Flat Roofs
- Suitable For Use On
- Pitched Roofs
- Suitable For Use On
- Roof
- Suitable For Use On
- Pipes
- Suitable For Use On
- Guttering
- Suitable For Use On
- Chimney Stacks
- Usages
- Waterproofing
- Product Usage Type
- Repair
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Categorised As
- Roof Paints > Low Temperature Emergency Waterproofing
- Seasonal
- Cold Weather
Questions
Question about the product
Euan Ross
on
2023-10-27 09:28:25
| Question:
Hi Can Rust-Oleum Fillcoat Fibres Repair Kit be used to seal a plastic roof vent in my static caravan roof with a pantile plastic roof. Also can a previous attempt to seal with silicon be painted over without removing it before application |
Answer from Rawlins’ Technical Team:
This product isn't compatible for use over silicone. The silicone would need to be removed in it's entirety to be considered for this type of application. | |
|
nigel
on
2021-09-30 16:50:46
| Question:
Can this product be used on rust and cracks on steel narrowboat roof? |
Answer from Rawlins’ Technical Team:
Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, depending on the size of the cracks and how large the “damaged” area is will determine the effectiveness of this.
This product can repair holes or cracks upto 2mm.
This would require the steel to be thoroughly de-rusted first of all.
| |
|
N King
on
2021-09-29 18:12:55
| Question:
Is this product good for filling cracks in a steel narrowboat roof? |
Answer from Rawlins’ Technical Team:
Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, depending on the size of the cracks and how large the “damaged” area is will determine the effectiveness of this.
This product can repair holes or cracks upto 2mm.
This would require the steel to be thoroughly de-rusted first of all.
| |
|
Guy Marshall
on
2021-05-19 12:11:54
| Question:
I have a zinc roof which has a small crack in it. The area has already been sealed with "Elastathane 25" sealant about 4 years ago, but the crack has now developed again. Can this product be used on top of the Elastathane sealant? |
Answer from Rawlins’ Technical Team:
Thank you for the enquiry, we have contacted you directly for more information. | |
|
Mark Evans
on
2020-04-15 15:45:52
| Question:
Hi Can localised repairs on a corrugated steel roof then safely be painted over with Rust-Oleum Mathys Noxyde Pegarust? Thanks |
Answer from Rawlins’ Technical Team:
Due to Rust-Oleum Mathys Noxyde Pegarust being solvent based we cannot recommend this for application over Rust-Oleum Fillcoat Fibres Repair Kit. For this application we can recommend Rust-Oleum Mathys Noxyde. | |
|
Neil McGeoch
on
2020-01-13 20:01:16
| Question:
Can this product be used to seal a secret cast iron gutter? I have a leak and believe it's in the gutter which would cost a fortune to replace, would this fix the problem? |
Answer from Rawlins’ Technical Team:
Yes, it can be applied to the inside of the gutter providing it is clean and free from rust. | |
|
Jes
on
2019-12-19 15:20:56
| Question:
Can this product be used to seal small holes (nail pop up) on a felt roof (garden shed). Thanks |
Answer from Rawlins’ Technical Team:
Yes this would be fine. | |
|
Kevin Stockford
on
2019-10-26 11:24:52
| Question:
Can I use this product to seal a water leak on a join across the top of a caravan and does it dry white |
Answer from Rawlins’ Technical Team:
Yes the product could be used for the application you have described but Rust-Oleum Fillcoat Fibres Repair Kit is Dark Grey in colour. If you require a product white in colour we would instead suggest Britannia Aquashield High Build which can be used in conjunction with Britannia Reinforcing Scrim if required. | |
|
Roland
on
2019-07-11 13:57:59
| Question:
Can this product be used on flat roof covered with rubber lining materials |
Answer from Rawlins’ Technical Team:
No, we would instead recommend Gaco Liquid Roof Tape. | |
|
Sam Dorrian
on
2019-06-04 09:44:50
| Question:
Can this product be used to seal a failed lead box gutter? The product specification references zinc but not lead. Thanks |
Answer from Rawlins’ Technical Team:
Yes, this product after cleaning and preparation can be applied to lead and is ideal in gutters. | |
|
colin stewart
on
2019-05-06 12:26:24
| Question:
Can this product be used to seal cracks in corrugated Asbestos roofing AND from the INSIDE ?? |
Answer from Rawlins’ Technical Team:
This product would be for use on the exterior (top side) of the roof only and the surface (after cleaning in accorandce with local regulations) would first need to be primed with Rust-Oleum Mathys Primer 44 HS. If you the wished to encapsulate the interior, underside of the roof to seal isolated asbestos fibres and prevent release you could use Thermoguard Asbestos Encapsulating Coating. | |
|
Debra
on
2018-07-10 14:19:10
| Question:
Can I use this product on concrete gutters to seal them |
Answer from Rawlins’ Technical Team:
Yes, however porous materials (concrete, stone, wood) must first be dried and pre-treated with a coat of Rust-Oleum Mathys Primer 44 HS. | |
|
trevor
on
2018-06-25 11:08:57
| Question:
can i use rust-oleum fibre kit on my corrugated steel roof to repair a leak and how long would it likely last |
Answer from Rawlins’ Technical Team:
Yes, Rust-Oleum Fillcoat Fibres Repair Kit may be used for this purpose, obviously depending on the actual source of the leak, and how large the “damaged” area is will determine the effectiveness of this. In terms of longevity we would estimate approximately five years, but this would require the steel to be thoroughly de-rusted first of all. | |
|
m jones
on
2018-06-12 09:39:36
| Question:
Good Morning .... I have a slate water feature in my garden and the water compartment has sprung a leak .... would Rust-Oleum Fillcoat Fibre Repair kit solve the problem and if so can I paint it onto the inside of the tank? Thank you. |
Answer from Rawlins’ Technical Team:
We would suggest that the Fillcoat Fibres could offer a short term solution for this issue. However, we are presuming there has been some kind of structural failure (hence “springing a leak”) and without knowing more about that, we cannot advise how effective the Fillcoat Fibres will be, or for how long. | |
|
Craig Bell
on
2018-02-03 20:15:41
| Question:
Rust-Oleum Fillcoat Fibres Repair Kit. Can this be used to repair flat fibreglass roof? Thanks |
Answer from Rawlins’ Technical Team:
Yes. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Fillcoat Fibres Repair Kit is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Rust-Oleum Mathys Dacfill Waterproofing
Durable waterproofing solution for sloped roofs available in grey. For use on bitumen, cementitious, asphalt, plastics, and more. Forms a watertight, high-build, and elastic coating. Resistant to UV, acid rain, heat, frost, and pollution. Professional use only.
Price
£52.13
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Mathys Fillcoat
Available in black, light grey and dark grey. Instant leak stoppage; Ideal for roofs, non-walkable terraces, gutters, ridge-pieces, chimney stacks, and pipes. Excellent adhesion to a variety of substrates. Can be applied in all weather conditions.
Price
£16.44
(incl. VAT)
In Stock and Available for Delivery
Rust-Oleum Mathys Primer 44 HS
Available in grey. Designed for stabilising loose particles on brittle or weathered roofs, floors, and walls. For porous mineral substrates. Flexible, withstands temperature changes, offers quick water resistance. Professional use only. VOC compliant.
Price
£82.87
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery