Once I have applied this product to my walls , do I need to wash off prior to painting please .

This product is designed to be applied by brush or low pressure spray and left for one hour. You'll then need to clean the surface using a stiff bristled brush to remove any loose debris, and apply a second coat if any growth remains, leaving for 24 hours. You'll need to clean again and wash down, taking care to remove any white deposit which may have formed.

Can I use? should I use? your fungicidal wash to remove fungal/mildew/from wooden fence before re painting with fence paint? or what is best?

This product would be fine to use on a wooden fence to remove fungal growth and mildew, you will need to dilute by a ratio of 50:50 with clean water prior to application.

Hi Does this product need to be diluted with water before applying please? Thanks

This product is fine to be applied neat, without the need for diluting before application.

after application to roof and dried overnight. In the next rain storm will any be washed into the rain collection butts in small concentrations, and will that affect plant growth if the water from the butt is used on the garden?

This product is very toxic to aquatic life with long lasting effects. If it recommended to not discharge into drains or rivers. It should also not be used in wet weather or when rain is to be expected. We would suggest not to allow it to get into the water butts.

How much would I need to clean a roof 25x15 meters

The coverage rate of this product is 4 to 6m² per litre per coat. For 375m² per coat you would require approximately 93.75litres. The condition of the substrate would determine how many coats would be required.

Would this kill mushrooms growing on an exterior wall?

This product removes lichen, moss, algae and similar vegetation on roofs or walls and should aid in reducing growth.

Cromar AlphaChem Fungicidal Wash

Brand Cromar

Search ID CRO5897

Provides a growth-free surface prior to treatment with surface finishes.

Removes lichen, moss, algae and similar vegetation on roofs, walls and other surfaces.
Suitable for use on concrete, asbestos, cement, slates, tiles, brickwork, paths and paving.
Do not apply in wet weather.
Formerly known as Moss & Mould Remover.

Colour

Clear

Size

£7.08(incl. VAT)

£5.90(ex. VAT)

Quantity

Please choose your colour

Available for Delivery (See Delivery Options Below)

ColourPicker Explained

In general we sort colours for products into 2 main groups - ‘Ready Mixed’ and ‘Tinted’.
Tinted colours will always be more expensive than Ready Mixed colours as they need to be produced at the time of order using a tinting machine dispensing colourant into a base*.
During busy periods, this means that tinted colours could take longer, for example – a ready mixed colour ordered on a 3-5 day delivery might arrive within 3 days, however a tinted colour might take the full 5 days to arrive.

To find Ready Mixed colours, search "ready mixed" or select the Ready Mixed 'colour chart'. To see Tinted colours select a colour chart such as RAL, BS, NCS, etc. or search for a colour/hue to see available or related options.

To ensure fair pricing, we split colours into ‘Price Bands’ to group together similar priced colours. If you wish to search for the cheapest tinted colours, always select Price Band 1.

We make every effort to list all available colours, however we also offer a colour match service which can be accessed by contacting our Technical Team on 0113 245 5450 (option 2) or emailing [email protected]

*Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour

Colour reproduction of the Products on the Site is limited by the technology used to deliver web pages and by the colour representation of Customer’s own monitor and computer set-up. We have made every effort to display as accurately as possible the colours of our Products but we cannot guarantee that the colour shown on Customer’s monitor’s display will accurately reflect the colour of the Product on delivery. We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person (and not digitally) to ensure that the colour is acceptable for its purposes.

6 questions about the product

Description

Cromar AlphaChem Fungicidal Wash (formerly Moss & Mould Remover) kills lichen, moss and similar vegetation providing growth free surfaces. It is used to remove growth on roofs, walls and other external surfaces prior to treatment with surface finishes.

Powerful cleaning formula. Ideal for treating and removing fungi, algae and lichens on paths, walls, roofs and drives.

Do not apply in wet weather.

Very toxic to aquatic life with long lasting effects. Do not discharge into drains or rivers, and contain any spillage using bunding.

Product Details

Reference 5897-896973

Data sheet

For Use By: Consumer Use
Interior / Exterior Use: Exterior Use
Application Method: Brush, Low pressure spray
Colour: Clear
VOC Levels: 0g/l
Single, Two or Three Pack: Single
Pack Size: 1L, 2.5L, 5L, 25L
Coverage: 4-6m²/litre/coat
Shelf Life (from date of manufacture): 2 years
Waiting time: 1 - 24 hours
Viscosity: Non-viscous
Flashpoint: 93°C
Boiling Point: 100°C
Base Type: Water-Based
Suitable For Use On: Slate
Suitable For Use On: Concrete
Suitable For Use On: Brick
Suitable For Use On: Tiles
Suitable For Use On: Asbestos
Suitable For Use On: Cement
Application Method: Brush
Application Method: Spray
Components: 1K
Product Usage Type: Fungicidal Wash
Product Range: Alphachem
Colour Family: Clear
Product Type: Fungicidal Wash

Attachments

Download

Safety Data Sheet

Download

Technical Data Sheet

Download

Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

Questions

Question about the product

Name ^*

Email ^*

Question ^*

^* Required fields

I have read and agree to the conditions of use (read)

John Ansley on 2023-09-03 18:26:34	Question: Once I have applied this product to my walls , do I need to wash off prior to painting please .
	Answer from Rawlins’ Technical Team: This product is designed to be applied by brush or low pressure spray and left for one hour. You'll then need to clean the surface using a stiff bristled brush to remove any loose debris, and apply a second coat if any growth remains, leaving for 24 hours. You'll need to clean again and wash down, taking care to remove any white deposit which may have formed.

Mark on 2023-08-11 18:02:42	Question: Can I use? should I use? your fungicidal wash to remove fungal/mildew/from wooden fence before re painting with fence paint? or what is best?
	Answer from Rawlins’ Technical Team: This product would be fine to use on a wooden fence to remove fungal growth and mildew, you will need to dilute by a ratio of 50:50 with clean water prior to application.

Melaina on 2023-08-03 19:50:16	Question: Hi Does this product need to be diluted with water before applying please? Thanks
	Answer from Rawlins’ Technical Team: This product is fine to be applied neat, without the need for diluting before application.

AW on 2023-07-21 11:03:37	Question: after application to roof and dried overnight. In the next rain storm will any be washed into the rain collection butts in small concentrations, and will that affect plant growth if the water from the butt is used on the garden?
	Answer from Rawlins’ Technical Team: This product is very toxic to aquatic life with long lasting effects. If it recommended to not discharge into drains or rivers. It should also not be used in wet weather or when rain is to be expected. We would suggest not to allow it to get into the water butts.

Dem on 2023-05-23 17:34:45	Question: How much would I need to clean a roof 25x15 meters
	Answer from Rawlins’ Technical Team: The coverage rate of this product is 4 to 6m² per litre per coat. For 375m² per coat you would require approximately 93.75litres. The condition of the substrate would determine how many coats would be required.

Suzanne Hallsworth on 2023-01-08 15:12:11	Question: Would this kill mushrooms growing on an exterior wall?
	Answer from Rawlins’ Technical Team: This product removes lichen, moss, algae and similar vegetation on roofs or walls and should aid in reducing growth.

IMPORTANT SHIPPING & DELIVERY INFORMATION

Cromar AlphaChem Fungicidal Wash is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

All delivery costs below are excluding VAT

Follow us on:

Cromar AlphaChem Fungicidal Wash

Cromar AlphaChem Fungicidal Wash

Data sheet

Questions

Question about the product

IMPORTANT SHIPPING & DELIVERY INFORMATION