Follow us on:

Hensel Hensotherm 820 KS | Fire Protection For Concrete
Hensel Hensotherm 820 KS | Fire Protection For Concrete

Hensel Hensotherm 820 KS

HEN013
HEN5918

Thin-film water-based fire protection coating for interior concrete. It improves the fire-resistance time of pre-stressed concrete hollow ceilings up to 120 minutes, reinforced concrete beams and supports up to 150 minutes, and concrete flat slab ceilings and reinforced concrete ribbed slab ceilings up to 240 minutes.

  • Forms a heat-insulating carbon foam barrier in the event of fire - prevents concrete structural elements from heating up and flaking off the steel reinforcement – Patent No. 2686391
  • Tested in compliance with the European standard EN 13381-3:2015
  • Warringtonfire EWCL Certificate No. ME 5119
  • Very well suited for Minergie-(A-/P-) Eco / Corresponds to Priority 1 of Eco-BKP
  • Easy to process, no loads on surrounding structure, maintenance free
  • External and in-house monitoring/building material approval no. Z-19.11-2196
  • Low VOC < 6g/l, A+ VOC emission class, LEED confirmation, AgBB tested
  • Apply over Hensel Beton-Carbonsperre to prevent contamination and water penetration
  • Please Note: Colour shown is approximate
Colour
Size
Finish
£562.10(incl. VAT)
£468.42(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Hensel Hensotherm 820 KS is a thin-film water-based fire protection coating for interior concrete. It improves the fire-resistance time of pre-stressed concrete hollow ceilings up to 120 minutes, reinforced concrete beams and supports up to 150 minutes, and concrete flat slab ceilings and reinforced concrete ribbed slab ceilings up to 240 minutes.

In the event of fire, Hensel Hensotherm 820 KS forms a heat-insulating barrier of carbon foam and thus prevents the concrete structural elements from heating up and the concrete from flaking off the steel reinforcement – patented under European Patent No. 2686391. Hensotherm 820 KS greatly delays the build-up of heat in concrete. At temperatures over 330°C, concrete and steel reinforcements expand at different rates.

It is tested in compliance with the European standard EN 13381-3:2015, analogous to prEN 13381-3:2012, and is approved to Warringtonfire EWCL Certificate No. ME 5119.

Hensel Hensotherm 820 KS is easy to use, puts no load on the surrounding structure and is maintenance free. 

This product is a 'Hensel Green Product' with low VOC (< 6g/l), an A+ VOC emission class, LEED confirmation and is AgBB tested. It is a product very well suited for Minergie-(A-/P-) Eco low energy consumption buildings and corresponds to Priority 1 of Eco-BKP.



Quick Links - Click To Jump To Section:




Features & Benefits


       
  • Thin-film water-based fire protection coating for interior concrete
  • Improves the fire-resistance time of pre-stressed concrete hollow ceilings up to 120 minutes, reinforced concrete beams and supports up to 150 minutes, and concrete flat slab ceilings and reinforced concrete ribbed slab ceilings up to 240 minutes
  • Forms a heat-insulating carbon foam barrier in the event of fire - prevents concrete structural elements from heating up and flaking off the steel reinforcement – European Patent No. 2686391
  • Greatly delays the build-up of heat in concrete
  • Tested in compliance with the European standard EN 13381-3:2015, analogous to prEN 13381-3:2012
  • Warringtonfire EWCL Certificate No. ME 5119
  • Very well suited for Minergie-(A-/P-) Eco / Corresponds to Priority 1 of Eco-BKP
  • Easy to process, no loads on surrounding structure, maintenance free
  • External and in-house monitoring / building material approval no. Z-19.11-2196
  • Low VOC < 6g/l, A+ VOC emission class, LEED confirmation, AgBB tested
  • Apply over Hensel Beton-Carbonsperre to prevent contamination and water penetration



Areas Of Application


  • Hensotherm 820 KS is a single component thin-film water-based fire protection coating for applications in dry indoor rooms
    • The fire resistance duration can be extended up to 240 minutes on flat concrete ceilings/concrete walls (Warringtonfire summary letter reference: CT/345425 Issue 3)
    • The fire resistance duration can be extended up to 150 minutes on concrete beams/concrete columns (Warringtonfire summary letter reference: CT/339816 Issue 2)
    • The fire resistance duration of hollow concrete slabs can be improved up to 120 minutes (2012-Efectis-R0556 [Rev1])
  • Also possible on request are ribbed ceiling upgrades with an assessment report
  • It is recommended that you consult with the responsible planning authority or architect before installing the fire protection system
  • On request, a project based guide can be drawn up that serves as a basis for the approval of individual cases - Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details
  • The ambient conditions during the application must be documented in a report

 

Applications:



Approvals/Certifications


  • Warringtonfire CT/345425 Issue 3 + CT/339816 Issue 2, Warringtonfire EWCL Certificate No. ME 5119
  • Efectis Nederland B.V. | Report: 2012-Efectis-R0556 [Rev1] 2)
  • LEED confirmation
  • Very well suited for Minergie-(A-/P-) Eco / Correspond to priority 1 of Eco-BKP
  • Building material approval no. Z-19.11-2196
  • VKF approval no. 27213 +27215
  • European Patent No. 2686391
  • European patent protection / signatories: AL, AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MC, MK, MT, NL, NO, PL, PT, RO, RS, SE, SI, SK, SM, TR



Suspensions/Installations


  • The installation of suspensions, threaded rods, bolts etc. is possible up to a diameter of ≤ 20mm
  • Other supporting points may not exceed a diameter of ≤ 25mm
  • If 1 suspension/installation component piece per m² is not exceeded, compensation measures are not necessary and possible heat penetration in the event of fire is negligible



Product Features


  • Pseudoplastic, non-hygroscopic, intumescent, fire-resistant coating
  • Greatly delays the build-up of heat in concrete. At temperatures over 330°C, concrete and steel reinforcements expand at different rates
  • Prevents concrete from flaking off. The product complies with the requirements under DIBt (October 2010) and AgBB (June 2012)
  • Water-based system
  • Free of APEO (alkyl phenol ethoxylate), halogens, and borates
  • No fibre or other particulate emissions
  • VOC emissions class A+
  • No loads on the surrounding structure, space saving, no headroom loss
  • Only thin coating thicknesses are required: 0.42–1.7mm (Exova), 1.5–3.5mm (Efectis)
  • Easy to process, maintenance free
  • Under the optimal conditions, a wet film thickness up to 1,500µm thick can be applied in the one operation
  • Colour: White (approx. RAL 9010)



Notes


  • For Professional Use Only
  • Hensel Beton-Carbonsperre prevents contamination and water penetration
  • Beton-Carbonsperre must be fully dry before applying Hensel Hensotherm 820 KS - subject to a positive fingernail test
  • Under the optimal conditions, a wet film thickness up to 1,500µm thick can be applied in one operation
  • Hensel Hensotop WB top coat offers the possibility of coloured design and protection against moisture - it should be applied when surfaces are exposed to environmental influences
    • Do not apply the top coat before Hensotherm 820 KS is fully dried. At the earliest after 24 hours and after a positive fingernail test



    IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

    Product Details
    5918-897234

    Data sheet

    Manufacturer
    Hensel
    For Use By
    Professional Use
    Interior / Exterior Use
    Interior Use
    For Use On
    Concrete
    Application Method
    Airless Spray, Brush, Roller
    Single, Two or Three Pack
    Single
    Pack Size
    25KG
    Key Features
    Water-based fire protection coating for interior concrete
    Dry to Recoat (at 20°C)
    Min. 24 hours and after a positive fingernail test
    Coverage
    Low material consumption for high cost effectiveness: approx 840g/m² to 3,382g/m² depending on building requirements
    Compatible Primers
    Hensel Beton-Carbonsperre
    Compatible Topcoats
    Hensel Hensotop WB
    Min. Application Temperature
    10°C
    Shelf Life (from date of manufacture)
    12 months
    UN Number
    N/A
    Colour(s)
    White
    Base Type
    Water-Based
    Suitable For Use On
    Concrete
    Finish
    Matt
    Application Method
    Brush
    Application Method
    Roller
    Application Method
    Spray
    Usages
    Fire Retardant
    Product Usage Type
    Basecoat
    Product Range
    Hensotherm
    Colour Family
    White
    Fire Rating
    120 Minutes
    Fire Rating
    240 Minutes
    Fire Rating
    150 Minutes
    Categorised As
    Fire Protection for Concrete
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

    Questions

    Question about the product

    * Required fields
    (read)

    Be the first to ask a question about this product!

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Hensel Hensotherm 820 KS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like
    Hensel Hensotop WB | Available In A Wide Range Of RAL Shades

    Hensel Hensotop WB

    A water-based single component, halogen-free and fast-drying top coat in 80+ colours for water-based Hensotherm fire protection coatings. For use on interior and exterior wood. Formerly Hensotop 84 AQ Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg Provides protection from moisture...

    Price £108.26 (incl. VAT)
    Shop now
    Trustpilot
    In Stock and Available for Delivery
    Hensel Beton-Carbonsperre | Protective Primer For Concrete

    Hensel Beton-Carbonsperre Anti-Carbonation Coating

    A protective coating with excellent hiding power for use as a primer before applying Hensel Hensotherm 820 KS or Hensel Hensomastik B 3000 fire protection coatings on structural elements of concrete, and for concrete renovation. Protects concrete substrates prior to the application of the Hensel Fire Protection Coating Prevents...

    Price £398.22 (incl. VAT)
    Shop now
    Trustpilot
    In Stock and Available for Delivery