Follow us on:

Hensel Hensomastik B 3000 | Fire Protection For Concrete
Hensel Hensomastik B 3000 | Fire Protection For Concrete

Hensel Hensomastik B 3000

HEN014
HEN5924

Water-based fire protection coating for interior and exterior concrete. Improves fire-resistance time of concrete and reinforced concrete structural parts up to 120 minutes and is used particularly in areas with high emission loading, such as underground and multi-storey car parks.

  • Fulfils the requirements under DIBt (October 2010) and AgBB (June 2012)
  • Tested in compliance with the European standard EN 13381-3:2015, analogous to prEN 13381-3:2012
  • Water-pressure resistant and weatherproof in accordance with DIN 1048
  • Easy to process, low film thickness, no loads on surrounding structure, maintenance free
  • External and in-house monitoring/building material approval Z-19.11-1715
  • Non-VOC in accordance with ISO 11890-2, A+ VOC emission class, LEED confirmation, AgBB tested
  • Low film thickness to save cost and time: 1.313 – 3.435 mm
  • Contains no halogens, APEO, borates, fibres or plasticisers
  • Apply over Hensel Beton-Carbonsperre to prevent contamination and water penetration
  • Please Note: Colour shown is approximate

Colour
Size
Finish
£424.18(incl. VAT)
£353.48(ex. VAT)
Quantity
Please choose your colour
Available for Delivery (See Delivery Options Below)

No queries yet, leave the first!
Description

Hensel Hensomastik B 3000 is a water-based fire protection coating for interior and exterior concrete. It improves the fire-resistance time of concrete and reinforced concrete structural parts to up to 120 minutes and is used particularly in areas with high emission loading, such as underground and multi-storey car parks.

Hensel Hensomastik B 3000 greatly delays the build-up of heat in concrete. At temperatures over 330°C, concrete and steel reinforcements expand at different rates. It prevents the concrete from flaking away from the steel reinforcement - fulfils the requirements under DIBt (October 2010) and AgBB (June 2012).

It is tested in compliance with the European standard EN 13381-3:2015, analogous to prEN 13381-3:2012, and is approved to Exova Warringtonfire WF report no. 339818.

Hensel Hensomastik B 3000 is easy to use, with low film thicknesses, puts no load on the surrounding structure and is maintenance free. 

This product is a 'Hensel Green Product' and non-VOC in accordance with ISO 11890-2, A+ VOC emission class, LEED confirmation, AgBB tested. It also contains no halogens, APEO, borates, fibres or plasticisers



Quick Links - Click To Jump To Section:




Features & Benefits


       
  • Water-based fire protection coating for interior and exterior concrete
  • improves the fire-resistance time of concrete and reinforced concrete structural parts to up to 120 minutes
  • Used particularly in areas with high emission loading, such as underground and multi-storey car parks
  • Prevents concrete structural elements from heating up and flaking off the steel reinforcement
  • Greatly delays the build-up of heat in concrete
  • Fulfils the requirements under DIBt (October 2010) and AgBB (June 2012)
  • Tested in compliance with the European standard EN 13381-3:2015, analogous to prEN 13381-3:2012
  • Water-pressure resistant and weatherproof in accordance with DIN 1048
  • Easy to process, low film thickness, no loads on surrounding structure, maintenance free
  • External and in-house monitoring/building material approval Z-19.11-1715
  • Non-VOC in accordance with ISO 11890-2, A+ VOC emission class, LEED confirmation, AgBB tested
  • Low film thickness to save cost and time: 1.313 – 3.435 mm
  • Contains no halogens, APEO, borates, fibres or plasticisers
  • Apply over Hensel Beton-Carbonsperre to prevent contamination and water penetration
  • Please Note: Colour shown is approximate



Areas Of Application


  • Indoor and outdoor applications
  • The fire resistance duration of concrete beams and columns can be improved by up to 120 minutes
  • We recommend that you consult with the responsible planning authority or architect before installing the fire protection system
  • On request, a project based guide can be drawn up that serves as a basis for the approval of individual cases - Please contact our Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for details
  • Please Note: The ambient conditions during the application must be documented in a report

 

Applications:



Approvals/Certifications


  • Exova Warringtonfire WF report no. 339818
  • Summary ref no. CT/339818 of 10 June 2015
  • LEED confirmation
  • Building material approval no. Z-19.11-1715



Product Features


  • Viscous, non-hygroscopic, ablative, fire-resistant coating
  • Greatly delays the build-up of heat in concrete. At temperatures over 330°C, concrete and steel reinforcements expand at different rates
  • Prevents concrete from flaking off. The product complies with the requirements under DIBt (October 2010) and AgBB (June 2012)
  • Water-based system
  • Free of APEO (alkyl phenol ethoxylate), halogens, and borates
  • No fibre or other particulate emissions
  • VOC emissions class A+
  • No loads on the surrounding structure, space saving, no headroom loss
  • Only thin coating thicknesses are required: 1.313–3.435 mm depending on reinforcement rod depth and required fire resistance duration
  • Easy to process, maintenance free
  • Under the optimal conditions, a wet film thickness up to 1,500µm thick can be applied in the one operation
  • Colour: White (approx. RAL 9010)



Notes


  • For Professional Use Only
  • Hensel Beton-Carbonsperre prevents contamination and water penetration
  • Beton-Carbonsperre must be fully dry before applying Hensel Hensomastik B 3000 - subject to a positive fingernail test
  • Under the optimal conditions, a wet film thickness up to 1,500µm thick can be applied in one operation
  • Hensel Hensotop WB top coat offers the possibility of coloured design and protection against moisture - it should be applied when surfaces are exposed to environmental influences
    • Do not apply the top coat before Hensel Hensomastik B 3000 is fully dried. At the earliest after 48 hours and after a positive fingernail test



    IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.

    Product Details
    5924-897240

    Data sheet

    Manufacturer
    Hensel
    For Use By
    Professional Use
    Interior / Exterior Use
    Interior & Exterior
    For Use On
    Concrete
    Application Method
    Airless Spray, Brush, Roller
    Single, Two or Three Pack
    Single
    Pack Size
    25KG
    Key Features
    Water-based fire protection coating for interior and exterior concrete. Improves the fire-resistance time of concrete and reinforced concrete structural parts to up to 120 minutes
    Dry to Recoat (at 20°C)
    Min. 48 hours and after a positive fingernail test
    Coverage
    Low material consumption for high cost effectiveness: approx 2 kg/m² @1mm DFT/1.4mm WFT
    Compatible Primers
    Hensel Beton-Carbonsperre
    Compatible Topcoats
    Hensel Hensotop WB
    Min. Application Temperature
    10°C
    Shelf Life (from date of manufacture)
    12 months
    Recommended Dry Film Thickness
    1mm
    Recommended Wet Film Thickness
    1.4mm
    UN Number
    N/A
    Dust Dry (at 20°C)
    Approx 6 hours
    Colour(s)
    White
    Base Type
    Water-Based
    Suitable For Use On
    Concrete
    Finish
    Matt
    Application Method
    Brush
    Application Method
    Roller
    Application Method
    Spray
    Usages
    Fire Retardant
    Product Usage Type
    Topcoat
    Product Range
    Hensomastik
    Colour Family
    White
    Fire Rating
    120 Minutes
    Categorised As
    Fire Protection for Concrete
    Attachments
    Download


    Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product. Where we have access to the Product Data Sheet from the manufacturer, we will either provide a copy on request, or include a link to the Product Data Sheet available on the manufacturer’s website. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Sheets. For more information, please see our Terms & Conditions of Sale.

    Questions

    Question about the product

    * Required fields
    (read)

    Be the first to ask a question about this product!

    IMPORTANT SHIPPING & DELIVERY INFORMATION

    Hensel Hensomastik B 3000 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.

    Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.

    Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.

    All delivery costs below are excluding VAT


    You might also like
    Hensel Hensotop WB | Available In A Wide Range Of RAL Shades

    Hensel Hensotop WB

    A water-based single component, halogen-free and fast-drying top coat in 80+ colours for water-based Hensotherm fire protection coatings. For use on interior and exterior wood. Formerly Hensotop 84 AQ Special colour shades including Sikkens, NCS or samples are available on request – minimum quantity 10kg Provides protection from moisture...

    Price £108.26 (incl. VAT)
    Shop now
    Trustpilot
    In Stock and Available for Delivery
    Hensel Beton-Carbonsperre | Protective Primer For Concrete

    Hensel Beton-Carbonsperre Anti-Carbonation Coating

    A protective coating with excellent hiding power for use as a primer before applying Hensel Hensotherm 820 KS or Hensel Hensomastik B 3000 fire protection coatings on structural elements of concrete, and for concrete renovation. Protects concrete substrates prior to the application of the Hensel Fire Protection Coating Prevents...

    Price £398.22 (incl. VAT)
    Shop now
    Trustpilot
    In Stock and Available for Delivery