- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Anthracite Grey (RAL 7016) solvent-based adhesive primer and topcoat in one for direct application to many surfaces, including wood, metal*, interior and exterior uPVC, mdf, masonry, tiles, most plastics, old concrete and more.
- Looking for a lighter or darker grey? Pick one of our 12 trending shades of grey here
- Also available in 4,100+ colours
- For Professional use
- For internal/external use
- Quick drying
- Paint and primer in one
Please note: Colours are sold in the nearest tin size but actual paint volume per tin may vary up to 10% depending on colour.
Please always refer to the downloadable PDF`s from the "Data Sheets" tab for more information on:
- Technical Data
- Suitable Surfaces and Substrates
- Substrate Preparation
- Application Instructions
- Suitable Primers/Topcoats (where applicable)
- Drying Times
- Application Equipment
- Health & Safety Information
- Warranty
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
Metal
Tiles
MDF
Masonry
Plastic
Concrete
Brick
Mineral Substrates
PVC
Plaster
Galvanised Steel - Application Method
- Brush
Roller
Spray - Sheen
- Matt
Gloss
Satin - Single, Two or Three Pack
- Single
- Single, Two or Three Pack
- Single
- Pack Size
- 750ml
2.5L - Dry to Handle (at 20°C)
- 8 hours (at 20°C)
- Recommended Thinner/Cleaner
- Rust-Oleum Thinner 160
- Max. Application Temperature
- 35°C
- Min. Application Temperature
- 5°C
- Heat Resistance (up-to)
- 80°C (dry heat), at elevated temperatures discoloration may occur.
- VOC
- 350g/L
- Shelf Life (from date of manufacture)
- 2 years
- Touch Dry
- 4 Hours (at 20°C)
- Recommended Dry Film Thickness
- 62 μm
- Recommended Wet Film Thickness
- 105 μm
- UN Number
- UN1263
- Consumption
- 9-10m² per litre
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Brick
- Suitable For Use On
- Tiles
- Suitable For Use On
- MDF
- Suitable For Use On
- Wood
- Suitable For Use On
- Plaster
- Suitable For Use On
- Galvanised Steel
- Suitable For Use On
- PVC
- Suitable For Use On
- Mineral Substrates
- Suitable For Use On
- Masonry
- Suitable For Use On
- Timber
- Suitable For Use On
- Metal
- Suitable For Use On
- Concrete
- Suitable For Use On
- Plastic
- Finish
- Matt
- Finish
- Satin
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Manufacturer
- Rust-Oleum
- Fastest Delivery
- Next Working Day
- Colour Family
- Anthracite Grey
Questions
Question about the product
Matt on 2024-06-15 16:19:50 | Question:
Is this ok to use on external treated timber, as i want it to match the window frames? |
Answer from Rawlins’ Technical Team:
Assuming the external timber is bare, clean, dry, sound and prepared as detailed in the technical datasheet, this product can be applied to bare timber, as well as prepared previously applied coatings. We'd recommend abrading the existing coating and apply to a small test area firstly, to check for compatibility and adhesion, prior to two full coats in your choice of many RAL, BS & NCS Colours. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum CombiColor Multi-Surface - Anthracite Grey is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Rust-Oleum Thinner 160
High dilution capacity thinner. Can be used on various Rust-Oleum coatings and as a strong glue remover. Long shelf life of up to 5 years when stored correctly. For professional use.
Rust-Oleum Mathys 108 Surfa Etch Solution
High performance etching solution. For use on smooth concrete, masonry, galvanised steel, and aluminium. Improves adhesion of coatings. Neutralises alkaline salts. Removes 'white rust' from metal. Non-flammable. Professional use only.
Rust-Oleum Mathys ND14 Cleaner Degreaser
Non-flammable, virtually odour-free cleaning/degreasing solution used to remove grease, oil, proteins, dirt and more from coated, mineral and steel substrates. Can be used as an additive for high pressure and steam cleaning Applied by synthetic sponge, cloth, brush or broom Low concentration (3-5% is sufficient for most cleaning)
Rust-Oleum CombiColor Original
4,400+ colours available. Primer and topcoat in one. For rust, bare metal and primed steel surfaces. Covers 10.3m² per litre. Lead and chromate free. Usable down to 5°C. Buy A Colour Paint Sample
Rust-Oleum 3369/3380 CombiPrimer Anti-Corrosion
Available in grey and red, can or aerosol. Two-pack anti-rust primer for new or slightly rusted surfaces. For steel surfaces, provides and enhance protection against corrosion. Recoatable after 2 hours; fast drying and lead- and chromate-free. 5-year shelf life if stored properly.
Rust-Oleum 3302 CombiPrimer Adhesion Primer
Available in a transparent blue finish. Highly effective adhesion primer for ensuring smooth surfaces are coatable. For galvanised steel, stainless steel, aluminium, copper, glass, and porcelain. High coverage of 50 m²/L. Recoatable after just 30 minutes.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Rust-Oleum CombiColor Original Aerosols
10+ Colours. Aerosol paint for rust protection and metal surfaces. For rust, bare metal, or primed steel for small maintenance jobs or touch-ups. High gloss finish. Lead- and chromate-free with rust-inhibitive pigments for added corrosion protection. Dry to handle in 6 hours; fully cured in 7 days.
Rust-Oleum CombiColor Multi-Surface
4,400+ Colours. Solvent-based primer and topcoat available in gloss, satin, and matt finishes. For wood, metal, mdf, masonry, tiles, most rigid plastics, and old concrete. Lead- and chromate-free. Excellent adhesion, quick drying. Professional use only. Buy A Colour Paint Sample