- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempacore One FD 43601 is a fast drying one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires, suitable for in-shop and on-site applications.
- Use as intumescent fire protection for internal and external structural steel. Suitable for open beams and columns and hollow sections, as a repair and touch-up coating for damaged areas of freshly applied Hempacore One FD 43601, and as in-shop applied intumescent for increased application efficiency
- Tested and approved according to EN13381-8 and BS476-21 for up to 120 minutes fire protection and more certifications below
Description
Hempacore One FD 43601 is a fast drying one component, solvent-borne, physically drying intumescent coating for passive fire protection of structural steel against cellulosic fires. It is suitable for in-shop and on-site applications.
Quick Links - Click To Jump To Section:
Features & Benefits
- For intumescent fire protection for internal and external structural steel. Suitable for open beams and columns and hollow sections.
- For repair and touch-up coating for damaged areas of freshly applied Hempacore One FD 43601
- For in-shop applied intumescent for increased application efficiency
- Can be applied in up to 1500 micron [59 mils] dry film thickness per coat (equivalent to 2000 micron [79 mils] wet film thickness)
- DFT is dependent on the required fire resistance as well as the massivity factor (Hp/A) of the steel element
- Coverage rate 1m² /l - 750 micron/30 mils
- Apply with brush or airless spray. Spray nozzle orifice 0.017 - 0.023 ", nozzle pressure 200 bar [2900 psi]
- The steel must be coated with a Hempel approved primer. Only available in white, but can be top coated with an approved topcoat in any colour. If unsure contact our technical team at 0113 2455450 (option 2) or send a message to [email protected]
- Thinning is not recommended. Recommended tool cleaners are: Hempel Thinner 08080 or Hempel Tool Cleaner 99610
Product Certifications
- Tested and approved according to EN13381-8 and BS476-21 for up to 120 minutes fire protection
- Fire protection up to 4 hours can be achieved for a limited range of massivity (Hp/A) sections at various critical temperatures
- CE marked product with European Technical Approval ETA 12/0581 according to ETAG018 Part 2
- Approved with Certifire certificate nº CF 5146
- Complies with EU Directive 2004/42/EC: subcategory i
IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.
Product Details
6088-900347
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Steel
- Application Method
- Airless spray/ Brush
- Sheen
- Flat
- Colour
- 10000/White
- VOC Levels
- 310 g/l
- Single, Two or Three Pack
- Single
- Pack Size
- 20L
- Application
- Brush, Spray
- Touch Dry (at 20°C)
- 20 minutes @ 750 microns
- Dry to Handle (at 20°C)
- 16 hours @ 750 microns
- Coverage
- 1 m²/L- 750 micron/30 mils
- Recommended Thinner/Cleaner
- Thinning not recommended. For cleaning tools: HEMPEL'S THINNER 08080 or HEMPEL'S TOOL CLEANER 99610
- Max. Application Temperature
- 30°C
- Min. Application Temperature
- 5°C
- Solids by Volume
- 75 ± 3
- Shelf Life (from date of manufacture)
- 12 months
- Finish
- Flat
- Recommended Dry Film Thickness
- Up to 1500 micron [59 mils] dry film thickness per coat
- Recommended Wet Film Thickness
- Up to 2000 micron [79 mils]
- Specific Gravity
- 1.3 kg/litre
- Flashpoint
- 5 °C
- Colour(s)
- White
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Finish
- Flat
- Application Method
- Brush
- Application Method
- Spray
- Product Usage Type
- Fire Retardant
- Product Range
- Hempacore
- Colour Family
- White
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempacore One FD 43601 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
You might also like
Hempel Thinner 08080
Hempel's Thinner 08080 is a thinner for Hempel's Hempatex, Hempaquick, Hempathane topcoats and enamels, Hempel's Antifoulings, Globic and Dynamic, Oceanic and Olympic. For paint to be applied in a low film thickness (for instance as a "sealer coat") or if the paint has become too thick, e.g. in cold weather Tools can usually be cleaned...
Price
£25.39
(incl. VAT)
In Stock and Available for Delivery
Hempel Tool Cleaner 99610
Hempel Tool Cleaner 99610 is a blend of strong solvents for cleaning of tools that have been used for mixing or application of two-component epoxy products. Better cleaning properties than epoxy thinners, and does not contain chlorinated solvent For cleaning of brushes, paint rollers, spray equipment, and other tools which have been used...
Price
£34.61
(incl. VAT)
In Stock and Available for Delivery