- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Available in 2 shades of Grey.
- Two-component waterproofing coating for horizontal roofs. Provides durable protection.
- For bitumen, concrete, pre-painted surfaces, and roof tiles.
- Quick drying, touch dry in 1.5 hours.
- UV, acid rain, heat, frost, and pollution resistant.
- Professional use only.
Description
Rust-Oleum Mathys Dacfill HZ
Dacfill HZ is a high-performance, water-based liquid membrane designed for waterproofing horizontal roofs. This two-component system forms a seamless, elastic coat that ensures 100% watertight protection. Its white colour reflects sunlight, reducing heat absorption, and enhancing energy efficiency. The product is easy to apply with a brush, roller, or airless spray, making it versatile for various professional applications.
Features and Benefits
- Quick Drying: Touch dry in 1.5 hours and ready for recoating in 12 hours, minimizing downtime during application.
- High Durability: Resistant to UV radiation, acid rain, heat, frost, and pollution, ensuring long-lasting protection.
- Safe Application: Non-flammable and self-extinguishing properties provide enhanced safety during use.
- Versatile Use: Suitable for application on bitumen, concrete, pre-painted surfaces, and roof tiles.
- Environmentally Friendly: Low VOC levels at 55 g/l, complying with environmental safety regulations.
- Elastic Finish: Provides a seamless, joint-free coat that adapts to substrate movements, preventing cracks and leaks.
Application Instructions
For optimal results, ensure the substrate is clean, dry, and free from debris. Apply a primer if necessary, depending on the substrate material. Mix components A and B thoroughly before application. Use a brush, roller, or airless spray to apply the first coat, embedding Dacfill-mesh for added reinforcement on low-slope roofs. Allow the first coat to dry, then apply a second coat to achieve the desired thickness. Avoid application on TPO substrates or during adverse weather conditions.
Restrictions and Limitations
- Do not apply on TPO materials.
- Avoid application during wet or extremely humid conditions to ensure proper drying and adhesion.
- Not for consumer use: This product is intended for professional or industrial applications only.
Recommended Products
For additional surface preparation and protection, consider using Parafix for substrate fixation and Elastofill for joint filling. These complementary products enhance the overall performance and longevity of the Dacfill HZ coating.
Health and Safety
- UN Number: 3082
- Dacfill HZ is classified as non-hazardous with low VOC levels of 55 g/l. Always wear appropriate personal protective equipment, including gloves and eye protection, during application. Refer to the downloadable safety data sheet for detailed health and safety information. In case of accidental contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if necessary.
Product Details
619-928050
Data sheet
- Manufacturer
- Rust-Oleum
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- For Use On
- Concrete, PVC, Polyester, Iron, Steel
- Application Method
- Brush, Roller, Spray
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 20KG
- Mixing Ratio
- Base : Activator 19.2 : 0.8 (Weight)
- Application
- Brush, Roller, Spray
- Dry to Handle (at 20°C)
- 1,5 Hours
- Dry to Recoat (at 20°C)
- 12 Hours
- Fully Cured (at 20°C)
- 1 Week
- Coverage
- 1m² per KG
- Max. Application Temperature
- Relative humidity: 85%
- Min. Application Temperature
- 5°C
- Density
- 1,25
- Solids by Volume
- 51 %
- Touch Dry
- 1,5 Hours
- Recommended Dry Film Thickness
- 600 micron per coat (cons.: 1,5 kg/m²)
- Recommended Wet Film Thickness
- 1200 micron per coat (cons.: 1,5 kg/m²)
- UN Number (Activator)
- UN3082
- UN Number (Base)
- Not regulated
- Base Type
- Solvent-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Suitable For Use On
- PVC
- Suitable For Use On
- Iron
- Suitable For Use On
- Polyester
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Roofs
- Product Usage Type
- Topcoat
- Product Range
- Dacfill
- Fastest Delivery
- Next Working Day
- Colour Family
- Grey
- Roof Type
- Flat
Questions
Question about the product
Mark
on
2021-01-26 16:42:35
| Question:
Can this product be over coated yearly or will it need the full system reapplied? or primed? |
Answer from Rawlins’ Technical Team:
This product has a 15 year maintenance free life expectancy, so this should not be required. But assuming the roof is clean, dry, sound and prepared as detailed in the Technical Data Sheet it can be reapplied directly. | |
|
Phil
on
2019-07-08 16:16:22
| Question:
Hi - a few years back i applied 3M Scotchkote Poly-Tech LS 657 (the 5 year system) to my roof. I bought it from yourselves. I've still got a couple of years before first maintanance, but I see it is now discontinued. Could I just apply the likes of Mathys Dacfill HZ over the top? Look forward to hearing from you. Cheers Phil |
Answer from Rawlins’ Technical Team:
It is always difficult guaranteeing compatibility between two different manufacturers however, assuming all the usual preparation requirements (good condition, well adhered, clean and dry etc.) then we think Rust-Oleum Mathys Dacfill HZ should be fine as a maintenance coat in this instance. | |
|
Matthew
on
2018-06-01 15:45:43
| Question:
I want to add a waterproof paint coating to a flat felt roof. The rood is reasonably new (1 year) but prone to ponding in some areas and already has one 'spongy' patch where water has clearly gone through the top mineral layer. I would like to add a waterproof paint layer to this to protect it further, can you recommend a product please from your range? Cheers |
Answer from Rawlins’ Technical Team:
Rust-Oleum Mathys Dacfill HZ (used in conjunction with Rust-Oleum Mathys Dacfill HZ Fleece) may be used in areas where long term ponding is expected so would be ideally suited to your application. However, the fact that the felt is already “suspect” (where water has already penetrated after only a year) if that is causing problems underneath the felt layer, the Dacfill HZ cannot resolve that. | |
|
ken
on
2017-06-02 12:40:59
| Question:
can Rust-oleum Mathys Dacfill hz be walked on when dry (say on a terrace). |
Answer from Rawlins’ Technical Team:
No, but for products that can see our Balcony Paint Systems category. | |
|
gary wiseman
on
2015-09-14 11:31:15
| Question:
Can Rust-Oleum Mathys Dacfill HZ be applied to an epdm roof? |
Answer from Rawlins’ Technical Team:
No, but 801 Seamless Roof Finish or GacoPro Roof Coating can. | |
|
gary wiseman
on
2015-09-14 11:31:15
| Question:
Can Rust-Oleum Mathys Dacfill HZ be applied to an epdm roof? |
Answer from Rawlins’ Technical Team:
No, but 801 Seamless Roof Finish or GacoPro Roof Coating can. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Rust-Oleum Mathys Dacfill HZ is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
Temporarily Out-of-Stock
Rust-Oleum Mathys Noxyde
We no longer stock this product, but have Rust-Oleum Mathys Noxyde - 5KG colours in clearance, for immediate dispatch!
In stock
Rust-Oleum Mathys Primer 44 HS
Available in grey. Designed for stabilising loose particles on brittle or weathered roofs, floors, and walls. For porous mineral substrates. Flexible, withstands temperature changes, offers quick water resistance. Professional use only. VOC compliant.
Price
£86.17
(incl. VAT)
In Stock and Available for Delivery
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...
Price
£12.08
(incl. VAT)
In Stock and Available for Delivery