- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Hempaquick Enamel 53840 is a quick drying alkyd enamel with good gloss and colour retention.
Recommended use as a topcoat on steel in mild to moderately corrosive environments.
In case of line application of small items to be packed together, Hempalin Enamel 52140 is recommended.
For professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartQuick Links - Click To Jump To Section:
Application
- For new build, maintenance and repair
- Recommended thinner/cleaner: Hempel's Thinner 08080
- Apply with brush/roller or airless spray. Nozzle pressure: 150 bar [2200 psi] Nozzle orifice: 0.011-0.015"
- To avoid condensation, apply on a clean and dry surface with a temperature that is at least 3°C above the dew point
- Two coats of the topcoat may be necessary to obtain full hiding power
- DFT 40 microns, WFT 100 microns, coverage rate 10 m²/L
- For more application information see data sheets above
If brush or roller application is used, more coats will be necessary to achieve the specified dry film thickness. Spray data are indicative and subject to adjustment. Pressure is for a material temperature of 20°C.
Product may be specified in another film thickness than indicated depending on purpose and area of use. This will alter spreading rate, drying and curing time and overcoating interval. For best performance, avoid excessive film thickness.
Drying and Overcoating
- Previous coat: According to Hempel’s Specification. Recommended product is: Hempel's Speed-Dry Alkyd 43140
- Subsequent coat: None
- Touch dry in 45 minutes @ 20°C
- Hard dry: 90 minutes @ 20°C
- To obtain the drying time stated, it is important to maintain sufficient ventilation during application, drying and curing.
- Condensation on the freshly applied coating should be avoided
- Hempel’s Specification supersedes any recommendations given in the Product Data Sheets
Data sheet
- Manufacturer
- Hempel
- For Use By
- Professional Use
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent based
- For Use On
- Steel
- For Use On
- Steel
- Application Method
- Brush/roller, air spray, airless spray
- Sheen
- Gloss
- VOC Levels
- 516 g/L
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 20L
- Application
- Brush, Roller, Spray
- Touch Dry (at 20°C)
- 45 mins
- Coverage
- 10 m²/L
- Recommended Thinner/Cleaner
- Hempel's Thinner 08080
- Solids by Volume
- 41 ± 2%
- Heat Resistance (up-to)
- 140°C (dry exposure)
- Shelf Life (from date of manufacture)
- 5 years
- Recommended Dry Film Thickness
- 40 microns
- Recommended Wet Film Thickness
- 100 microns
- UN Number
- UN1263
- Specific Gravity
- 1.2 kg/L
- Hard Dry
- 90 minutes @ 20°C
- Flashpoint
- 29°C
- Colour(s)
- Fully Tintable
- Base Type
- Solvent-Based
- Suitable For Use On
- Steel
- Suitable For Use On
- Primed Surfaces
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Atmospheric
- Usages
- Gloss Retention
- Usages
- Colour Retention
- Usages
- Mild to Moderately Corrosive Environments
- Product Usage Type
- Topcoat
- Product Range
- Hempaquick
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Off-White
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Anthracite Grey
- Colour Family
- Violet
- Colour Family
- Cream
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Environment
- Atmospheric
- Touch Dry/Dust Free (@ 20-25°C)
- 45 mins
- Product Attributes
- Flexibility
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Hempel Hempaquick Enamel 53840 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT