- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
301 Epoxy Resin and Hardener is a two component thixotropic solvent free epoxy material used for injection applications, bonding of dissimilar materials and for use in conjunction with 701/702 Glass Tape to produce high strength composite repairs.
- Can be applied to manual or mechanically prepared surfaces and then wrapped with woven glass scrim to give a durable long term repair to leaking pipework
- Ideal for encapsulating problem pipework ranging from 1”-42” diameter, once cured the system can resist up to 300psi pressure
- For injection applications the material can be pumped into voids up to 15mm in depth
- For professional use only
- Refer to the data sheets and application guides for which products are required, depending on use case.
Features and Benefits
- For professional use only
- Resists attack by a wide variety of inorganic acids, alkalies, salts, and organic media
- Ideal for gap filling and injection applications
- Ideal for large diameter pipe wrapping
- Encapsulate long lengths of porous pipe work
- Suitable for manual or mechanically prepared surfaces
- Suitable for use in immersed conditions at temperatures up to 70°C
- Resistant to dry heat up to 150°C dependent on load
- USDA compliant for incidental food contact
- Approved by BUREAU VERITAS for Surface Protection and Cold Repair Products applied to Marine Vessels. Certificate No: 55258/AO BV
- Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Application
Please refer to the data sheets tab above for the product data sheets/application guide for in-depth information on using this product, including:
- Cold Bond Steel Plate with Epoxy Resin 100mm to 1200mm diameter pipework
- Epoxy Resin Pipe Encapsulation - 25mm to 1200mm diameter pipework
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Steel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 300g
6kg - Mixing Ratio
- By weight: 2:1
By volume: 2:1 - Coverage
- 300gm: 0.50m² at 500 microns
0.25m² at 1mm - Touch Dry
- 10°C 4 hours
20°C 2 hours
30°C 1 hours
40˚C 30 mins - UN Number (Activator)
- UN2735
- UN Number (Base)
- UN3077
- Fully Cured
- 10°C 6 days
20°C 3 days
30°C 1.5 days
40˚C 18 hours - Hard Dry
- 10°C 12 hours
20°C 6 hours
30°C 3 hours
40˚C 90 mins - Suitable For Use On
- Steel
- Product Usage Type
- Repair
- Usable Life
- 10°C 50 minutes
20°C 25 minutes
30°C 12.5 minutes
40˚C 6 minutes
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac 301 Epoxy Resin and Hardener is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT