- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resichem 503 SPEP is a low viscosity epoxy primer designed to seal concrete and cementitious surfaces. On curing the primer consolidates the surface and ensures excellent adhesion of other coating systems.
Penetrating primer for concrete and cementitious surfaces such as internal & external tanks surfaces, floors, structural concrete.
Once cured the coated surface must have a semi gloss finish; where there are signs of excessive porosity in the surface, the coating will have a dull finish. In such circumstances or where pinhole and weak spots are evident a second coat will be required.
For professional use only
Features and Benefits
- For professional use only
- Can be applied to cementitious surfaces with a moisture content of 8% or less
- Apply by brush, roller or standard airless spray
- Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
- Consolidates and seals porous surfaces
- Improves adhesion of epoxy or PU top coats
- Tolerant of less than ideal surface preparation
- Cures at low temperatures (5˚C)
- Fast cure and extended working life grades available
- Penetrates deep into the concrete surface
- Ensures high mechanical adhesion with Resimac chemical & corrosion top coats
Application
The material should be applied in at a target wet film thickness of 150 microns.
At 150 microns Resichem 503 SPEP will have a theoretical coverage rate of 6.66m² per ltr per coat.
Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Concrete
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 1L, 4L
- Mixing Ratio
- By weight: 2.24:1
By volume: 2:1 - Coverage
- 6.66m² per ltr per coat at 150 microns
- Heat Resistance (up-to)
- Up to 150°C (dry heat)
- Suitable For Use On
- Concrete
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Product Usage Type
- Tank Lining
- Product Range
- Resichem
- Maximum Overcoating Time
- 10°C 72 hours
20°C 36 hours
30°C 18 hours
40˚C 9 hours - Minimum Overcoating Time
- 10°C 6 hours
20°C 3 hours
30°C 1.5 hours
40˚C 45 minutes - Usable Life
- 10°C 50 minutes
20°C 25 minutes
30°C 12.5 minutes
40˚C 6 minutes - Water/Sea Water Immersion
- Up to 60°C
- Colour Family
- Amber
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac Resichem 503 SPEP is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT