Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application Notes
• Limitations

Features & Benefits

• High strength
• Fast installation rate
• Pump application
• Pre-blended to overcome site-batching variations
• Easy to use no priming required
• Rapid strength gain
• Shrinkage compensated, abrasion and weather resistant
• Blended from cements, fine aggregates and admixtures with a maximum grain size less than 1mm
• Yield: Approximate yield per 20kg bag is approx. 10.5L
• Fire Classification: EN 1504-3 cl. 5.5 Class A1
• Conbextra PM is non-flammable
• Please refer to the Product Data Sheet for full details of:
  • Properties
  • Mixing
  • Application Instructions
  • Finishing
  • Cleaning
  • Storage
  • Health and Safety

Application Notes

• Pre-soak substrate with water
• For a single bag the product can be mixed in a drum using a Renderoc Mixing Paddle and a slow speed (400 – 500 rpm) heavy duty drill
• Pump application by use of rotor stator or worm pump capable of mixing this particle size, using 25mm ID hosing
• Hand application by pointing gun or trowel is also possible

Please see the Product Data Sheet for detailed information.

Limitations

• Conbextra PM should not be used when the temperature is below 3°C and falling
• The product should not be exposed to moving water during application
• Exposure to heavy rainfall prior to final set may result in surface scour

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.