- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Resichem 506 Aluprime is a solvent based epoxy coating designed for the long term protection of steel and concrete structures against corrosion. The coating can be applied to mechanical or abrasive blast clean surfaces and will cure at temperatures as low as 5˚C.
Can be applied in a single coat or as a 2 coat system to properly prepared surfaces.
Note: Colours are approximate and not a binding representation of the final product
For professional use only
Features and Benefits
- For professional use only
- Apply to metallic surfaces suffering from condensation/ damp
- Ideal for protection against corrosion and weathering
- Compatible with acrylic and polyurethane top coats
- Tolerant of less than ideal surface preparation
- Provides long term protection in C1-C5 corrosive environments
- Typical applications include:
- Pipelines, internal & external tank surfaces
- Sheet and bearing piles, structural steel, process equipment
- Bridges, stairways
- External tank surfaces, structural steel
- Machinery, external pipe surfaces
- Transformers, steel containers, pump & Valve casings
- Brush applied, roller or standard airless spray
- Apply at 150 microns
- Theoretical coverage rate of 6.66m² per ltr per coat
- Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
- Suitable for use in immersed conditions at temperatures up to 40°C
- Resistant to dry heat up to 120°C dependant on load
- Resists attack by a wide variety of inorganic acids, alkalies, salts, and organic media including:
- Brine
- Crude Oil
- Diesel
- Hydrochloric Acid 10%
- Naphtha
- Phosphoric Acid 25%
- Sodium Hydroxide 35%
- Sulphuric acid 20%
Application
Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Concrete
- For Use On
- Steel
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5L
- Mixing Ratio
- By weight: 4.5:1
By volume: 4:1 - Coverage
- At 150 microns, a theoretical coverage rate of 6.66m² per ltr per coat.
- Heat Resistance (up-to)
- Up to 120°C (dry heat)
- UN Number (Activator)
- UN3066
- UN Number (Base)
- UN1263
- Base Type
- Solvent-Based
- Base Type
- Epoxy
- Suitable For Use On
- Concrete
- Suitable For Use On
- Steel
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Anti-Corrosion
- Usages
- Atmospheric
- Product Usage Type
- Primer
- Product Range
- Resichem
- Maximum Overcoating Time
- 10°C 72 hours
20°C 36 hours
30°C 18 hours
40˚C 9 hours - Minimum Overcoating Time
- 10°C 12 hours
20°C 6 hours
30°C 3 hours
40˚C 90 minutes - Usable Life
- 10°C 4 hours
20°C 2 hours
30°C 60 minutes
40˚C 30 minutes - Water/Sea Water Immersion
- Up to 40°C
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 6 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac Resichem 506 Aluprime is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT