- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Clear binding and sealing solution.
- For unstable brick, screed, or plaster before painting.
- 12-hour recoat interval.
Coo-Var Masonry Stabiliser
This single-pack masonry stabilising solution is specifically designed to address unstable or degraded surfaces such as brick, screed, and plaster. It seals porous surfaces effectively, creating a smooth and stable base for subsequent paint applications. It is perfect for preparing areas before a decorative topcoat is applied, ensuring long-lasting results by preventing further deterioration of the underlying masonry.
Application Recommendations
Prior to applying the product, ensure that the surface is thoroughly cleaned, removing any loose debris, oil, grease, or flaking material. Apply using a brush or roller in a well-ventilated area, ensuring that the surface is completely dry. The recoat time is typically 12 hours, but drying times may vary depending on conditions. It is essential to mix the product well before use to achieve the best results.
Restrictions and Limitations
This product should not be applied to surfaces that are wet or exposed to extreme temperatures, as this can adversely affect its performance. Do not use on wood, metals, or other surfaces that are not masonry, screed, or plaster. Additionally, always check compatibility before applying subsequent topcoats.
Other Recommended Products
Once your masonry has been stabilised, it is recommended to apply a suitable topcoat to ensure complete protection and a smooth finish. Refer to our range of decorative coatings for ideal pairing with this stabiliser. For more details, please consult the product technical and safety data sheets available for download.
Health and Safety
- UN Number: 1263
It is essential to avoid skin contact and prolonged inhalation of fumes. Always wear protective clothing and ensure proper ventilation during use. For full safety details, refer to the Material Safety Data Sheet (MSDS).
Data sheet
- Manufacturer
- Coo-Var
- For Use By
- Consumer Use
- Single, Two or Three Pack
- Single
- Parts
- One
- Base Type
- Organic Solvents
- Application
- Brush, Roller
- Coverage
- 9m² per litre
- Recommended Thinner/Cleaner
- Thinners 14
- Min. Application Temperature
- 5°C
- Solids by Volume
- 28%
- Touch Dry
- 2 Hours
- UN Number
- UN1263
- Colour(s)
- Clear
- Base Type
- Solvent-Based
- Suitable For Use On
- Masonry
- Finish
- Eggshell
- Application Method
- Roller
- Application Method
- Brush
- Product Usage Type
- Sealer
- Colour Family
- Clear
- Categorised As
- Masonry Stabilisers
Questions
Question about the product
Dee on 2018-02-09 16:53:52 | Question:
1. Can I use this on self levelling compound floor before tiling on top of it. 2. Can I use on peeling / flacking brick paint in front porch for maintenance work on wall. Trying to restore old brick wall on front of house - porch (dwarf walls) |
Answer from Rawlins’ Technical Team:
Stabilising Solution should not be required on a floor before using a self-levelling compound. We would recommend you follow the preparation guidelines for the levelling compound you have as this can vary depending on the type/product chosen. Stabilising Solution is intended for very porous masonry surfaces and surfaces subject to chalking. Peeling and flaking paints need to be removed back to a stable surface, Zinsser Peel Stop may also be useful here. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Coo-Var Masonry Stabiliser is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT