- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
An epoxy based coating system suitable for use in areas where a resistance of less than 10⁸ ohms is required as a measure to control static electricity. After mixing, an easily applied chemical and abrasion resistant finish is produced which is hygienic and easy to clean.
Typical applications include factory floors, laboratories, clean rooms, etc.
Note: Colours are approximate and not a binding representation of the final product
For professional use only
Features and Benefits
- For professional use only
- Apply by brush or roller
- For new and existing concrete
- Should be applied in two coats at a target thickness of 250 microns (10mil) per coat
- Theoretical coverage rate of 4m² per ltr per coat
- Please note that the coverage rates quoted are theoretical and do not take into consideration the profile or condition of the surface being repaired
Application
Please refer to the data sheets tab above for the product data sheet and application guide for in-depth information on using this product.
Chemical Resistance
Resists attack by a wide variety of low concentration industrial chemicals:
- Brine
- Crude Oil
- Diesel
- Hydrochloric Acid 10%
- Naphtha
- Phosphoric Acid 30%
- Sodium Hydroxide 30%
- Sulphuric acid 20%
Data sheet
- Manufacturer
- Resimac
- For Use By
- Professional Use
- For Use On
- Concrete
- For Use On
- Concrete Floors
- Application Method
- Brush
- Application Method
- Roller
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 5KG
- Mixing Ratio
- By weight: 2:1
By volume: 1.15:1 - Coverage
- 4m² per ltr per coat
- Base Type
- Solvent-Free
- Base Type
- Epoxy
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Application Method
- Brush
- Application Method
- Roller
- Usages
- Anti-Static
- Product Usage Type
- Repair
- Product Range
- Resichem
- Maximum Overcoating Time
- 10°C 72 hours
20°C 36 hours
30°C 18 hours
40˚C 9 hours - Minimum Overcoating Time
- 10°C 24 hours
20°C 12 hours
30°C 6 hours
40˚C 3 hour - Usable Life
- 10°C 90 minutes
20°C 45 minutes
30°C 22 minutes
40˚C 11 minutes - Chemical Contact
- 10°C 10 days
20°C 5 days
30°C 2.5 days
40˚C 30 hours - Colour Family
- Grey
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Resimac Resichem 593 Epoxy AS is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT