- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Fosroc Lokfix E35S is a two component polyester anchoring material, supplied in single component cartridges with astatic mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates.
Ideal for use on concrete (solid, porous and light), masonry and hollow bricks, and provides a cost effective alternative for the anchoring of threaded rods, reinforcing bars, profiled rod, steel section with undercuts and internal threaded rod sleeves.
Also available:
- Lokfix E55 based on styrene free vinyl-ester for medium to heavy duty anchoring
- Lokfix E75 based on pure epoxy for heavy duty fixings
Description
Quick Links - Click To Jump To Section:
Features & Benefits
- Fast return to service
- No additional mixing equipment required
- Does not apply expansive force to the substrate
- Enables fixings closer to edges than mechanical anchors
- Resisitant to a variety of chemicals
- Low VOC
- Re-usable by replacing the static mixer - spare mixer nozzles available here
- Waterproof, protecting the fixing from corrosion
- Performs over a wide variety of temperatures
- Please refer to the Product Data Sheet for full details of:
- Properties
- Specification Clause
- Standards Compliance
- Product Installation
- Estimating
- Storage
- Health and Safety
- Design Criteria
- Refer to the data sheets tab above for application guides and ETA fixings for hollow block, masonry and concrete
Uses
- For concrete (solid, porous and light), masonry and hollow bricks
- Cost effective alternative for the anchoring of threaded rods, reinforcing bars, profiled rod, steel section with undercuts and internal threaded rod sleeves
- Safe application in hollow bricks using a Hollow Block Sleeve
- For horizontal, vertical and overhead application
- Bonding and surface crack sealing applications
- Suitable for dry, wet and flooded concrete
Application Notes
- May be used with good quality skeleton gun (300ml size) e.g Lokfix Applicator Gun (E35/E55)
- Supplied in boxes of 12 no. 300ml cartridges, each supplied with a single mixer nozzle
- Cartridge temperature should be between +15 to +30ºC for optimal use. The substrate temperature can vary significantly from the ambient temperature
- Wet resin should be removed from tools and equipment using Fosroc Solvent 102 immediately after use
Gel and Full Curing Times
| Substrate Temp | Gel time (minutes) | Fixing Time (minutes) |
|---|---|---|
| -5ºC | 90 | 360 |
| 0ºC | 45 | 180 |
| 5ºC | 25 | 120 |
| 10ºC | 20 | 100 |
| 15ºC | 15 | 80 |
| 20ºC | 6 | 45 |
| 30ºC | 4 | 25 |
| 35 - 40ºC | 2 | 20 |
Table is for dry conditions. If the substrate is wet, double the curing time e.g. for 120 mins dry then 240 mins wet.
Limitations
- Load calculations to be taken by a qualified engineer
- When embedding into hollow masonry it is normally necessary to use hollow block sleeves
- Not recommended for the following conditions: seismic; cracked concrete and fire rated, consider Lokfix E55S or Lokfix E75 after referring to the respective technical datasheets
Product Details
7894-919024
Data sheet
- Manufacturer
- Fosroc
- For Use By
- Professional Use
- For Use On
- For concrete (solid, porous and light), masonry and hollow bricks
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 300ml
- Application
- Pour
- Coverage
- Please see the Product Data Sheet - Coverage is dependent on hole diameter
- Recommended Thinner/Cleaner
- Fosroc Solvent 102
- Flexural Strength (at 20°C)
- (EN196) 30MPa
- Max. Application Temperature
- 30ºC
- Min. Application Temperature
- 15ºC
- Density
- 1.74kg/L
- Heat Resistance (up-to)
- Permanent 50°C, temporary 80°C
- Shelf Life (from date of manufacture)
- 300ml cartridges have a maximum shelf life of 12 months when kept in a dry warehouse at between +5 to +25ºC
- Compressive Strength
- (EN196) 70MPa
- Suitable For Use On
- Masonry
- Suitable For Use On
- Concrete
- Application Method
- Application Gun
- Manufacturer
- Fosroc
- Usages
- Anchoring
- Product Usage Type
- Strengthening
- Product Range
- Lokfix
- Categorised As
- Repairs > Low Temperature Bonding and Adhesives
- Seasonal
- Cold Weather
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Fosroc Lokfix E35S is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT