- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Teamalak Siliconised Teak Oil, previously known as Teamac Teak Oil, is a blend of natural oils and silicone derivatives which enhance, preserve and restore the appearance of teak and other hardwoods.
- Good degree of resistance to water.
- For interior or exterior use.
- Ideal for use on outdoor furniture.
Teamalak Siliconised Teak Oil, previously known as Teamac Teak Oil, is a blend of natural oils and silicone derivatives which enhance, preserve and restore the appearance of teak and other hardwoods.
Click To Jump To Section:
- Features & Benefits
- Product Specification
- Film Thickness Range And Coverage
- Drying Times
- Surface Preparation
- Preceeding Coat
- Mixing
- Application Conditions
- Application Methods
- Health & Safety
Features & Benefits
Advantages
- Good degree of resistance to water
- For interior or exterior use
- Ideal for use on outdoor furniture
Product Specification
Technical Data | |
---|---|
Volume Solids | 34% |
VOC Content | Max 514 g/litre |
SG | 0.86 @ 20°C |
Viscostity | Thin Liquid |
Flash Point | Above 32°C (closed cup) |
Film Thickness Range And Coverage
Product Data | |||
---|---|---|---|
Dry Film Thickness | Wet Film Thickness | Theoretical Coverage | |
Maximum | N/A | N/A | 7 m2/litre |
Average figure dependant on the porosity of the wood.
The practical spreading rate may be lower as this depends on factors such as the porosity and roughness of the surface to be painted and material losses during application.
Drying Times
Drying Times At 20°C/RH 50% | |
---|---|
Touch Dry: | 8 Hours |
Dry To Handle: | 24 Hours |
Dry To Recoat: | 16 hours or overnight |
Fully Cured: | N/A |
Low temperature and high humidity will adversely affect application, drying and performance of any coating.
Surface Preparation
- All surfaces should be clean, dry, sound and free from contaminants.
- Ensure the surface is left to dry for 1 to 2 weeks.
- Use sandpaper to remove any unwanted old coatings or paints.
Preceeding Coat
- Apply direct to wood.
Mixing
- Mix well before use.
Application Conditions
- As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.
- Apply as a flood coat, work well into the grain, taking particular care at "end" grains.
Application Methods
Method | Airless Spray | Conventional Spray | Brush | Roller |
---|---|---|---|---|
No | No | Yes | No |
- Thinner (Max vol): N/A
- Nozzle Size: N/A
- Nozzle Pressure: N/A
- Cleaning Solvent: Thinners 14
Health & Safety
See safety data sheet - SDS 11372 in the attachments section above.
Data sheet
- Manufacturer
- Teamac
- Manufacturer
- Teamac
- Interior / Exterior Use
- Exterior Use
- Water / Solvent Based
- Solvent
- For Use On
- Hardwood, Teak
- Application Method
- Brush, Cloth
- Colour
- Clear
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
- Touch Dry (at 20°C)
- 8 Hours
- Dry to Handle (at 20°C)
- 24 Hours
- Dry to Recoat (at 20°C)
- 16 hours or overnight
- Fully Cured (at 20°C)
- N/A
- Coverage
- 7 m²/litre
- Recommended Thinner/Cleaner
- Thinners 14
- Solids by Volume
- 34%
- VOC
- Max 514 g/litre
- Size
- 0.5 litre, 1 litre, 2.5 litre
- Recommended Dry Film Thickness
- N/A
- Recommended Wet Film Thickness
- N/A
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Suitable For Use On
- Hardwood
- Application Method
- Brush
- Application Method
- Cloth
- Product Usage Type
- Teak Oil
- Colour Family
- Clear
Questions
Question about the product
peter on 2019-09-17 22:40:59 | Question:
Hi, I have floating oak shelves which I want to use outdoors on my patio. Can i use a teak oil to protect the wood from the elements or if not what product would you recommend? Thanks in advance, Peter |
Answer from Rawlins’ Technical Team:
Yes, Teamac Teak Oil would be ideal for this application. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Teamalak Siliconised Teak Oil is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Teamac Thinner 14
Clear hydrocarbon solvent. For thinning and cleaning down Teamac products. For marine paints, metal coatings, and similar surfaces.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...