- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
205 Flexible Joint Filler, a coloured two pack, pourable, flexibilised epoxy filler/sealant. The consistency of the mixed sealant allows direct pouring of the sealant into horizontal joints.
Seals floor joints in food factories and warehouses where heavy vehicular trafficking occurs.
- Available in 4,400+ colours, inc. RAL, RAL Design, BS, NCS & the new NCS 2050 colours
- Readily available standard colours available here
- Can be used with polyethylene foam backing strips
- Images are for illustrative purposes only and may differ from the actual product
- This product is for Professional Use Only
Ordering References | Weight | Min. Order Quantity |
---|---|---|
RAL Classic and BS4800 Colours | 1L | 50 |
RAL Classic and BS4800 Colours | 2L | 25 |
RAL Classic and BS4800 Colours | 5L | 10 |
BS381C, RAL Design, NCS | 1L | 75 |
BS381C, RAL Design, NCS | 2L | 38 |
BS381C, RAL Design, NCS | 5L | 15 |
Product customisation
Don't forget to save your customization to be able to add to cart205 Flexible Joint Filler is a coloured, two pack, pourable, flexibilised epoxy filler/sealant. The consistency of the mixed sealant allows direct pouring of the sealant into horizontal joints.
Hard and tough enough to protect joint edges from heavy wheel loading, 205 Flexible Joint Filler possesses sufficient flexibility to accommodate a degree of movement (10% of the joint width), and is particularly suitable for filling saw cut joints in long strip floor construction.
This product is for Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Typical Properties
- Joint Design
- Surface Preparation
- Mixing
- Application
- Equipment Cleaning
- Curing
- Limitations
Features & Benefits
- To seal floor joints in food factories and warehouses where heavy vehicular trafficking occurs
- No primer required
- Excellent adhesion to concrete
- Tough and resilient
- Suitable for wide joints
- Highly resistant to water
- Easy to apply
- Fast curing
- Hygienic and easily cleanable
- Low viscosity
Typical Properties
Typical Properties | |
---|---|
Pot Life: | 1hr @ 20°C |
Specific Gravity: | 1.32 |
Shore A hardness: | 75 |
Movement accommodation factor: | 10% |
Chemical Resistance: | Very good resistance to dilute mineral acids, alkalis, petrol, oils, milk, citric acid, hydraulic fluid, and hot water. Please refer to our technical department on 0113 2455450 (option 2) or send a message to [email protected] for specific advice. |
Joint Design
When using 205 Flexible Joint Filler, the joints shall be designed to ensure that concrete movement due to shrinkage and temperature fluctuations does not exceed 10% of the joint width.
- For joints up to 12mm wide, the depth of sealant should be equal to the width.
- For joints over 12mm wide the depth of sealant should not exceed 20mm.
- Joints over 25mm wide are permissible
Surface Preparation
New concrete floors shall be a minimum of 21 days old. Joint surfaces shall be sound, clean and free from laitance, dust and other contaminants.
Joint edges are best prepared by grinding or power wire- brushing; ensuring that all spoil and residual dust is removed by blowing with dry, oil free, compressed air.
De-bonding tape should be used in the base of the joints otherwise a polyethylene foam backing strip should be inserted to the appropriate depth.
Mixing
Pour the contents of the CURING AGENT container into the BASE container and thoroughly mix, preferably by mechanical means until a uniform consistency is achieved.
Mixing Ratio
- By Weight = 100 Base : 42.1 Curing Agent
Application
The mixed material may be poured directly into the prepared joints to level.
Alternatively, 205 FLEXIBLE JOINT FILLER may be poured into empty cartridge tubes and gunned into the joints using a sealant gun. It may be necessary to top up to level after a few minutes when the sealant has settled into irregularities.
Equipment Cleaning
Clean equipment with 109 TOOL CLEANER prior to curing of the sealant.
Curing
Will have cured sufficiently following 24 hours cure @ 20°C to allow trafficking.
Full chemical resistance will be achieved following 7 days cure @ 20°C.
At lower temperatures cure times will be increased.
Limitations
- Do not apply to wet or uncured concrete surfaces.
- Do not apply at temperatures of 3°C or less.
Data sheet
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior Use
- Single, Two or Three Pack
- Two-Pack
- Coverage
- 10 Linear Metres (of a 10mm x 10mm joint) per litre
- Touch Dry
- 24 Hours
- Colour(s)
- Fully Tintable
- Suitable For Use On
- Concrete
- Suitable For Use On
- Joints
- Application Method
- Sealant Gun
- Application Method
- Pour
- Product Usage Type
- Filler
- Product Category
- Paints
- Colour Family
- Lilac
- Colour Family
- Cream
- Colour Family
- Salmon
- Colour Family
- Beige
- Colour Family
- Grey
- Colour Family
- Green
- Colour Family
- Blue
- Colour Family
- Red
- Colour Family
- Brown
- Colour Family
- Pink
- Colour Family
- Orange
- Colour Family
- Purple
- Colour Family
- Yellow
- Colour Family
- Black
- Colour Family
- White
- Colour Family
- Neutral
- Colour Family
- Dark
- Colour Family
- Stone
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
205 Flexible Joint Filler - Special Colours is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT