Zinsser AllCoat Exterior Satin (Solvent Based) is an ultimate performance all surface paint. Designed for the long-term decoration (up to 15 years) of timber, metal, masonry, plastic, concrete, cladding and more. It forms a low maintenance water-shedding coating, re-coatable in 3 hours. Zinsser AllCoat Exterior Satin (Solvent Based) contains a biocide to protect the dried coating against fungal degradation. Available in 4,100+ RAL, NCS and BS colours.

Designed for all paintable exterior surfaces, it is ideal for low temperature applications where water based may not be suitable on new or previously painted wood, uPVC, galvanising, steel, aluminium, cladding, stucco, brick, stone, cured concrete, Plastisol and more. Zinsser AllCoat Exterior Satin (Solvent Based)answers the question "can you paint upvc windows and doors?"

This product is not suitable for application on floors.

Recommended Uses

• Redecoration and protection of all exterior surfaces
• Building Cladding
• Plastisol
• uPVC
• Wood
• Steel work – e.g. girders, fencing, railings and masonry surfaces.

Quick Links - Click To Jump To Section:

• Features & Benefits
• Surface Preparation
• Application
• Dry Time
• Coverage
• Cleaning
• Limitations
• Product Data

Features & Benefits

• Available in 4,100+ RAL, NCS and BS colours
• Multi surface application
• Can be applied to 5°C
• Resistant to showers after 1 hour
• Excellent colour retention
• Weather resistant
• Recoat time - 3 hours
• 15 year lifetime
• This product is not suitable for application on floors
• Recommended uses include:
• Redecoration and protection of all exterior surfaces
• Building Cladding
• Plastisol
• uPVC
• Wood
• Steel work – e.g. girders, fencing, railings and masonry surfaces.

Surface Preparation

Surfaces must be clean, sound and free of dirt, dust, grease, wax, loose paint or other surface contamination. Remove all existing mould and mildew before painting.

To effectively remove mould and mildew, use Blackfriar Fungicidal Wash. Timber at risk from decay or insect attack should be treated with Blackfriar Exterior Wood Preservative Gold Star Clear.

Very hard or glossy previously painted surfaces should be abraded and degreased. Before painting, fill all nail holes and gouges. Where necessary, spot prime knots and sap streaks with Zinsser B-I-N Primer-Sealer.

Abrade & degrease unweathered plastisol & powder coatings.

Allow new plaster/cement & stucco to cure 60-90 days before coating.

Thoroughly degrease new galvanised steel.

WARNING! If you scrape, sand, or remove old paint, you may release lead dust. LEAD IS TOXIC. EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE.

Application

Stir well before using.

Apply when air and surface temperatures are between 5℃ and 32℃ and humidity is less than 80%.

For airless spray use tip 0.13 - 0.017 at pressure 1800 – 2400 psi.

Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.

Dry Time

At normal temperatures i.e. 20℃, ALLCOAT Exterior Satin (Solvent Based) dries to recoat in 3 hour. Full cure takes 7 days.

Coverage

Up to 10m² per litre.

Normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards.

Cleaning

Clean up application tools, spills and drips with a white spirit.

If product has dried on application tool, clean with Zinsser Brush Cleaner and restorer. Follow manufacturer’s instructions when cleaning spray equipment.

Dispose of unused or unwanted product in accordance with local laws regulating solvent-based coatings.

Limitations

ALLCOAT® Exterior Satin (Solvent Based) is not intended for application to exterior floors or decks or any surface subject to water immersion.

To prevent product from skinning over, close container after each use. Keep lid tightly closed during storage.

The paint film is designed to resist cracking, peeling and blistering for up to 15 years before first maintenance. The contents are warranted to be free of defects for two years from date of manufacture.

All warranties and guarantees are limited to replacement or refund value of product actually used when supported by proof of purchase.

Directions are as complete as possible but cannot encompass all conditions, applications and / or surfaces beyond our control.

If you have a question, please contact Zinsser or Rawlins Technical Support on 0113 2455450 (option 2) or send a message to [email protected].

Product Data