Rockwool TCB Cavity Barrier products have been created to provide excellent levels of fire protection for timber frame and masonry properties. They have been designed to meet the minimum building regulation requirements for fire resistance in concealed wall cavities, having been tested and assessed for up to 60 minutes’ integrity and insulation, thereby exceeding minimum requirements.

These cavity wall insulation products have been created from non-combustible stone wool and wrapped within a resilient polythene sleeve which acts to provide weather protection during installation.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Installation
• Fire Performance

Features & Benefits

• Easy to install
• Fire resistance up to 60 minutes (EI)
• Reduces acoustic flanking transmission
• Improves air leakage & heat loss
• Unaffected by building movement
• Suitable for vertical and horizontal applications
• Site durable & weather protected
• Can be used in both vertical and horizontal applications, providing an effective fire, acoustic and thermal barrier within external wall cavities and separating party walls
• 1200mm long and designed to be compression fitted within the cavity (min 10mm-15mm compression)

Installation

• For full installation instructions see the product data sheet and installation guide
• All joints between adjacent cavity barriers and intersections should be closely butted to ensure that a continuous fire seal is maintained
• In vertical applications, both flanges of the Cavity Barrier can be fixed to the inner leaf at 150mm centres, using staples or clout nails prior to compression fitting by outer cavity wall
• In horizontal applications, only the top flange of the polythene sleeve should be fixed
• Fully filled cavities in external walls - Where the external wall cavity is fully filled external cavity barriers are generally not required in the outer wall
• Partially filled cavities in external walls - Where partial fill insulation is used in the external wall, the insulation should be cut back to permit the cavity barrier to be compression fitted between the inner and outer leaves. The head of the cavity wall should be closed at eaves level with the Rockwool TCB Cavity Barrier

Fire Performance

• Tested and assessed BS476: Part 20: 1987 and can achieve a fire resistance rating of up to 60 minutes (EI)
• Tested to BS EN 1366-4: 2006 +A1 2010 using the general principles of BS EN 1363-1:2012 achieving a fire resistance rating of up to 60 minutes (EI)
• Manufactured using non-combustible stone wool which is classified A1 in accordance with BS EN 13501-1: 2007 +A1 2009
• Third party approved for performance and quality by the Loss Prevention Council Certification Board (LPCB) and are listed in their Fire and Security ‘Red Book’ – certificate no: 022b (3)

IMPORTANT FIRE PRODUCTS NOTICE: The information displayed on this website should be used as a guide ONLY and our Technical Department should be contacted to obtain a tailored specification and any advice necessary before you place an order for fire protection products. Fire protection products are non-returnable except in accordance with Condition 8 of the Terms and Conditions and should be applied only by an individual with the necessary expertise and experience. We will not be held liable for any resulting damage to property, human life or monetary costs incurred due to the incorrect specification you have prepared or use of fire protection products caused by your negligence, including your failure to have contacted us to obtain the relevant advice/specification.