Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application

Features & Benefits

• Single component polyurethane based resin
• Can be applied on porous surfaces such as concrete, cement, etc
• Can be diluted to support low absorption
• Applicable by roller, brush or airless spray equipment
• Can be applied on surfaces with a maximum surface humidity of 5%
• Can be applied in combination with mineral particles (silica sand) on very uneven surfaces
• High solids content
• Translucent
• Excellent bond on porous surfaces

Application

• Do not apply to surfaces that are damp or exuding water from inside the substrate (water pressure due to phreatic level, condensations, leaks, etc.)
• Product requires a flat, clean and dry surface, as hard as possible
• Surface must be clean and dry. If necessary, use pressure water to remove any oil or grease residue, efflorescence or other contaminants, as well as loose cement laitance
• In some cases it will be necessary to use mechanical processes to prepare the surface, as well as chemical means to clean metal surfaces
• Wait until total evaporation of cleaner or check support moisture before applying
• Dilute with Desmosolvent if necessary, max.5 % dilution. Mix for 2 minutes or until the correct mixture is achieved. Desmosolvent can also be used to clean equipment after use
• Can be applied with a roller, brush or airless spray equipment
• Apply one or more coats until the desired thickness is obtained
• Depending on the state of the surface to be treated, unevenness or plane level, yield can vary between 150~300 g/m². in one or several thin layers (do not apply thick coats)
• If the surface to be treated is very uneven, apply an initial coat of Ultraprime mixed with mineral filings to level it
• Wait until completely dry before applying the desired waterproofing or concrete protection system. Tack free in 60 minutes, fully dry in 2 - 3 hours, and recoatable in 3 - 24 hours @ 23 ºC