- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
High-performance 2K acrylic polyurethane clearcoat, in Matt or High Gloss, designed to provide high scratch resistance, weathering resistance and gloss retention.
- Designed to be applied directly over Selemix 7-53x 2K Direct Topcoats without any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried
- Product can be purchased as a Two Component Pack, or as Base or Hardener only
- Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450 (option 2) or send a message to [email protected] for details.
- For Professional Use Only
Selemix 4-0015/4-0090 2K Acrylic Clearcoat is a high-performance 2K acrylic polyurethane clearcoat, available in Matt or High Gloss, designed to provide high scratch resistance, weathering resistance and gloss retention.
Designed to be applied directly over Selemix 7-53x 2K Direct Topcoats without any sanding of the topcoat as long as the topcoat is oven baked or overnight air dried. Surfaces should be thoroughly degreased using the appropriate cleaner in case of dust or contamination.
Application can be by conventional spray.
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450 (option 2) or send a message to [email protected] for details.
For Professional Use Only.
Quick Links - Click To Jump To Section:
- Features & Benefits
- Product Codes Explained
- Surface Preparation
- Matting Chart
- Mixing
- Application Notes
- Theoretical Coverage
- Drying Times
- Health & Safety
Features & Benefits
- High-performance 2K acrylic polyurethane clearcoat
- Available in Matt or High Gloss
- Designed to provide high scratch resistance, weathering resistance and gloss retention
- Designed to be applied directly over Selemix 7-53x 2K Direct Topcoats without any sanding of the topcoat as long as the
topcoat is oven baked or overnight air dried - Product can be purchased as a Two Component Pack, or as Base or Hardener only
- Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together - Please see 'Matting Chart' below or contact us on 0113 2455450 (option 2) or send a message to [email protected] for details.
- For Professional Use Only
Product Codes Explained
- 4-0015 - Selemix 2K Acrylic Clearcoat - Matt
- 4-0090 - Selemix 2K Acrylic Clearcoat - High Gloss
- 9-080 - Hardener for Acrylic
Please note: Different gloss levels can be achieved by blending 4-0015 (Matt) and 4-0090 (Gloss) together. Please see 'Matting Chart' below.
Surface Preparation
Apply only on a clean and dry surface with a temperature above the dew point to avoid condensation. In confined spaces, provide adequate ventilation during application and drying.
Surfaces painted with Selemix 7-53x 2K Direct Topcoats:
- No abrasion or cleaning is required (depending on customer conditions) as long as clearcoat is applied within 24 hours
- Note: Surfaces should be thoroughly degreased using the appropriate cleaner in case of dust or contamination
Matting Chart
Mixing Guide For Various Gloss Levels | ||||
---|---|---|---|---|
Gloss Level | Matt | Semi-Matt | Semi-Gloss | Gloss |
4-0015 (Matt): | 100% | 95% | 85% | - |
4-0090 (Gloss): | - | 5% | 15% | 100% |
Clearcoat Volume ratio: | 2 | |||
9-080 Hardener Volume ratio: | 1 | |||
1-430 Thinner Volume ratio: | 0.2-0.3 |
Pleaase contact out Technical Department on 0113 2455450 (option 2) or send a message to [email protected] for more information.
Mixing
- Thoroughly mix paint before activating before use
Features | Conventional Spray |
---|---|
By Weight: 4-0090/4-0015 Clearcoat 9-080 Hardener |
By Weight: 1000 500 125-140 |
By Volume: 4-0090/4-0015 Clearcoat 9-080 Hardener |
By Volume: 2 1 0.2-0.3 (10-15%) |
Viscosity (at 20°C): | 16-18 secs DIN4 |
Pot Life (at 20°C): | 4 hours |
Mixing Ratio:
- Selemix 4-0015/4-0090 2K Acrylic Clearcoat
- 2 parts base : 1 part hardener
Please Note: Refer to the Product Data Sheet for detailed information regarding mixing ratios for the relevant binder/base and hardener/activator used.
Application Notes
Features | Conventional Spray |
---|---|
Spraygun Setup: |
Nozzle: Gravity: 1.3-1.6mm Suction: 1.4-1.8mm Pressure feed: 0.85-1.2mm |
Air Pressure: |
HVLP: 2 Bar Standard: 2-3 Bar |
Fluid Pressure: | N/A |
Number of coats: | 2 |
Flash-off between coats: | 10 mins |
Drying: | Air dry or bake at 60°C for 30 mins |
Flash-off before bake: | 10 mins |
Wet Film Thickness: | 100-125 microns |
Dry Film Thickness: | 40-50 microns |
Please see the Product Data Sheet for detailed Application Instructions before use.
Theoretical Coverage
- 8.8-9.1m²/L at 40 microns DFT
Note: Please see the Product Data Sheet for detailed information.
Drying Times
Drying Times 20°C | |
---|---|
Dust Free | 20-30 mins |
Touch Free | 2-3 hours |
Tape Free | 6-12 hours |
Handleable | 2-3 hours |
Hard Dry | 24 hours or after bake |
Overcoating time |
Minimum: When Hard Dry Maximum: 24 hours by itself without sanding |
Please Note: Lower temperature or film thickness higher than 50µm will extend drying times |
Health & Safety
- For comprehensive Health, Safety and Environmental advice, please refer to the relevant Material Safety Data Sheets and product can labels
- THIS PRODUCT IS FOR PROFESSIONAL USE ONLY
Data sheet
- Manufacturer
- Selemix
- For Use By
- Professional Use
- Water / Solvent Based
- Solvent Based
- For Use On
- Painted Surfaces
- Sheen
- Matt
High Gloss - Single, Two or Three Pack
- Two-Pack
- Mixing Ratio
- 2 to 1
- Application
- Spray
- Pot Life (at 20°C)
- 4 hours
- Recommended Dry Film Thickness
- 40-50 microns
- Recommended Wet Film Thickness
- 100-125 microns
- UN Number (Activator)
- UN1263
- UN Number (Base)
- UN1263
- Hard Dry
- 24 hours or after bake
- Dust Dry (at 20°C)
- 20-30 minutes
- Colour(s)
- Clear
- Substrate
- Painted / Primed Metal
- Usages
- High Chemical Resistance
- Usages
- High UV Resistance
- Technologies
- Solventborne
- Technologies
- 2K
- Application Methods
- Electrostatic
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Selemix 4-0015/4-0090 2K Acrylic Clearcoat is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Selemix 7-530/7-531 2K Polyurethane Direct Topcoat HS (10 GU)
Versatile, high solids 2-pack PU with 10% gloss finish for direct application to a variety of substrates without need for a primer. Suitable for use on Steel, Cast Iron, Aluminium, Light Alloys, GRP and Painted Surfaces Excellent anticorrosive properties Available in 10%, 30%, 50%, 70% and 80% Gloss Levels (click to view product)...
Selemix 9-080 Hardener For Acrylic
For use with selected products within the Selemix range including Selemix 2K Polyurethane Direct Topcoat, Selemix 7-110 2k Acrylic Topcoat and Selemix 2K Polyurethane Extra Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-470 Slow Direct Thinner
For use with selected products in the Selemix range including Selemix 2K Polyurethane Direct Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only
Selemix 1-430 Acrylic Thinner
For use with selected products in the Selemix range including Selemix 7-110 2K Acrylic Topcoat. Please see the Product Data Sheet for the Base Product for mixing ratios/application instructions before use For Professional Use Only