- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Intercoat W/B Colour Match Enamel is a self-crosslinking water-based enamel designed to meet the General Use requirements of FIRA 6250 on horizontal surfaces.
- Polymer made from FDA approved materials, making it suitable for indirect food contact
- Available in 4000+ colours in RAL and BS, in 10%-80% sheen
For professional use only.
Product customisation
Don't forget to save your customization to be able to add to cartQuick Links - Click To Jump To Section:
Features & Benefits
- For professional use only
- Available in 4000+ colours in RAL and BS, in 10%-80% sheen
- Self-crosslinking, water based enamel
- Designed to meet FIRA 5000 and FIRA 6250 General Use requirements on horizontal surfaces
- Polymer made from FDA approved materials, making it suitable for indirect food contact
Application
- Ensure all surfaces to be coated are clean, dry, and free from contamination
- Suitable for most wooden substrates
- Apply over a suitable water based primer such as Intercoat Aqualine Primer
- Thin with up to 2% clean water if necessary
- Apply by air-assisted airless or conventional pressure pot spray
- Apply at 80 microns WFT/25 microns DFT
- Coverage 12m2 per litre
- Must be sanded between coats
- Dries in 45-60 minutes @ 20°C
- Ideal application temperature is 18-22°C as lower temperatures may result in lack of film integrity while higher temperatures may result in film defects
Data sheet
- Manufacturer
- Intercoat
- For Use By
- Professional Use
- Application Method
- Spray
- Sheen
- 10-80%
- VOC Levels
- Approx. 70g/l
- Single, Two or Three Pack
- Single
- Pack Size
- 5L, 25L
- Coverage
- 12m2 per litre
- Shelf Life (from date of manufacture)
- 12 months
- Recommended Dry Film Thickness
- 25 microns
- Recommended Wet Film Thickness
- 80 microns
- Drying time
- 45-60 minutes @ 20°C
- Fully Cured
- 10-15 minutes at up to 40°C
- Viscosity
- 100-300 sec BS B4 cup @ 20°C
- Solids by Weight
- Typically 43%
- Flammability
- Non flammable
- Colour(s)
- Fully Tintable
- Base Type
- Water-Based
- Suitable For Use On
- Wood
- Application Method
- Spray
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Intercoat W/B Colour Match Enamel AQ100 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT