- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Vapour open, textured silicate primer for interior and exterior use.
- Hides surface imperfections and different substrates.
- Use on mixed exterior surfaces to even out substrate texture and hide micro cracks.
- Breathable – Class 1 vapour open.
- Trace VOCs – less than 0.1%.
- Good coverage – 10- 14m2/L.
Filler is a vapour open, textured silicate primer for interior and exterior use. The finish helps to even out and visually mask surfaces of differing textures eg: smooth patch repairs on an existing uneven render, new brickwork next to old. Filler can also be used to cover and fill crazing and hairline cracks < 1mm.
Areas of use: Interior & exterior. Existing surfaces –natural & cement render, masonry repairs and brick work.
Refer to the Product Data Sheet (downloadable from the "Data Sheets" tab above for more information on:
- Technical Data
- Surface Preparation
- Application Conditions
- Application Method
- Health & Safety Information
- Warranty
Limitations
- Mineral substrates must be at least 28 days old.
- The surfaces to be painted must be resistant to high alkalinity.
- Do not apply to surfaces in permanent contact with water.
- In case of rain, let the surface dry completely before application.
- It is recommended to protect the treated surface from rain for 24 hours.
- Parts that are not going to be treated should be protected (glassware or carpentry).
- Do not mix with other brands to maintain product efficacy.
Data sheet
- Manufacturer
- Graphenstone
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- All surface types common to construction: mortar, brick, concrete, old paint, etc
- Application Method
- Roller, Brush, Airless Spray
- Sheen
- Matt
- Single, Two or Three Pack
- Single
- Pack Size
- 1L, 4L, 15L
- Coverage
- 10- 14m2/L
- Recommended Thinner/Cleaner
- Water
- Max. Application Temperature
- +40°C
- Min. Application Temperature
- 5°C
- Shelf Life (from date of manufacture)
- 36 months
- Drying time
- At 25 ° C (77 oF) and 60% relative humidity: 4-6 hours before application of Graphenstone paints.
- Viscosity
- 90 - 120
- pH
- 11.5 ± 1
- Base Type
- Water-Based
- Suitable For Use On
- Concrete
- Suitable For Use On
- Brick
- Suitable For Use On
- Previously Painted Surfaces
- Suitable For Use On
- Mortar
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Roller
- Application Method
- Spray
- Usages
- Crack Bridging
- Usages
- Levelling/Equalising
- Categorised As
- Masonry Primers
- Product Type
- Levelling/Equalising
- Product Attributes
- Crack Bridging
Questions
Question about the product
Anna Edwards on 2023-04-27 09:19:55 | Question:
Can this be used to smooth out imperfections on a lime plastered interior wall, before painting with a breathable paint? The wall in question has suffered from damp in the past and I want to ensure that any substance I put on it is fully breathable. |
Answer from Rawlins’ Technical Team:
This filler is quite textured, it acts like a textured masonry where the small bits of aggregate will get into cracks. It’s not noticeable on external render but wouldn’t look good for internal smooth plaster. These areas should be addressed with a lime plaster. Regarding redecoration we would recommend 1 coat of Graphenstone Ambient Primer L42 followed by Graphenstone GCS Interior. This is available in a range of colours in a matt finish. Graphenstone Samples are available. | |
IMPORTANT SHIPPING & DELIVERY INFORMATION
Graphenstone Filler TX100 is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT