- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Dual action formula cleans and prepares bare concrete prior to painting.
- Use on old and new concrete, inside or outside
- Etches bare concrete to promote adhesion of paint finishes
- Removes dirt and light oil deposits
- Removes cement deposits from new concrete to ensure good paint adhesion
- Reduces alkalinity of new concrete – essential prior to application of single pack paints such as Watco Concrete Floor Paint
- Easy to use – unique gel formulation allows even etching
- Colour change system – when the pink liquid turns clear you know the job is done
- Acid based, neutralises when it’s done the job
- Prevents new paint from flaking and peeling
Note: While great care is taken with the colour samples shown, no guarantee can be given that they represent exactly the colours offered.
Watco Etch & Clean is a highly effective hydrochloric acid based etchant which removes surface laitance (a weak, cementitious dusty layer) from new, bare concrete prior to painting. Failure to remove laitance prevents paint bonding to the concrete and can lead to it peeling off the when the floor is put into use.
This unique dual action formula saves time since it both etches (provides a key) and cleans bare concrete ready for painting in one simple application. Etch & Clean reduces the alkalinity in new concrete.
High alkaline levels in new concrete can soften newly applied paint, especially single pack alkyd based paints such as Watco Concrete Floor Paint. Etch & Clean is easy to use. Unlike other floor etchants it has a thick, gel like consistency which allows greater control when applying the product to the floor. This results in a more evenly etched finish and so promotes more effective paint adhesion.
To help with application, the product has an added pH indicator, which changes from pink to clear once the surface has been prepared effectively.
Quick Links - Click To Jump To Section:
Features & Benefits
- Prepares any bare concrete prior to painting
- Use on old and new concrete, inside or outside
- Etches bare concrete to promote adhesion of paint finishes
- Removes dirt and light oil deposits
- Removes cement deposits from new concrete to ensure good paint adhesion
- Reduces alkalinity of new concrete – essential prior to application of single pack paints such as Watco Concrete Floor Paint
- Easy to use – unique gel formulation allows even etching
- Colour change system – when the pink liquid turns clear you know the job is done
Surface Preparation
Heavily contaminated Concrete – Heavy grease deposits should be removed using Watco Concroff, flushed with clean water and left to dry prior to etching.
Particularly porous surfaces – should be dampened slightly with water prior to applying Etch & Clean.
Application
As a guide, new concrete should be left for four weeks to dry in the summer and six in the winter if you are intending to apply a waterbased coating after etching, and eight weeks for a polypaspartic or high build coating (contact us for advice if you are unsure).
Bare Concrete surfaces – Apply Etch & Clean to a maximum area of 20m2 (see section headed Coverage) per 5 litres in conjunction with harsh scrubbing by stiff broom or machine and leave for 15 minutes until all frothing stops and the formulation has changed from pink to white/clear. Once the colour change has occurred the surface alkalinity has been fully neutralised. Flush the area with generous amounts of water to remove all traces of Etch & Clean and allow the area to dry thoroughly before painting. Brush and vacuum the surface to remove loosened particles of laitance.
How to tell if the surface laitance has been completely removed - after treatment with Watco Etch & Clean the surface should be inspected to ensure that all deposits of laitance have been removed. Test the surface by scraping it with the edge of coin. If a fine powdery film can still be easily removed from the surface etching with Watco Etch & Clean will need to be repeated.
Limitations
Do not apply to bare metal which is prone to rusting such as mild steel. Protect machinery or other objects to prevent corrosive attack from spillage or fumes.
Do not apply on painted or sealed surfaces; this product is suitable only for bare, porous concrete.
Etch & Clean is unsuitable for sand and cement screed floors and self-levelling compounds.
Where decorative surfaces are being treated it is advisable to test a small area first to ensure that there are no harmful effects to the material to be cleaned or to the surrounding surfaces.
Data sheet
- Manufacturer
- Watco
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Concrete
- Application Method
- Soft broom
stiff broom - Pack Size
- 5L
- Parts
- Single Pack
- Coverage
- 20m2
- Recommended Thinner/Cleaner
- Water
- Base Type
- Acid
- Suitable For Use On
- Concrete
- Suitable For Use On
- Concrete Floors
- Application Method
- Broom
- Components
- 1K
- Product Usage Type
- Cleaner/Degreaser
- Product Type
- Cleaner/Degreaser
- Product Type
- Acid Etch
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Etch & Clean Concrete Surface Preparation is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Watco Concroff Oil & Grease Remover
Lift grease and oil from bare concrete with this powerful, water-based degreaser. For preparation of heavily contaminated greasy floors prior to painting, inside or outside. Low odour formula Ideal for preparation to painting Removes oil and grease Can be diluted and used as a general floor cleaner on bare concrete Safe for use on most...
Watco Concrete Floor Paint Gloss
Easy to use pre-mixed, single-pack, polyurethane gloss coating for light traffic areas in warehouses, garages, and other concrete floors. Superior impact, hardness and adhesion Tested to CE Mark EN1504-2 ‘Best Ever Formula’ twice as durable as before Transforms and dustproofs drab, stained concrete Ideal for identifying production and...
Watco Anti Slip Concrete Floor Paint
Easy to use pre-mixed, single-pack, polyurethane anti-slip coating for light traffic areas in warehouses, garages, and other concrete floors. Superior impact, hardness and adhesion Tested to CE Mark EN1504-2 ‘Best Ever Formula’ twice as durable as before Transforms and dustproofs drab, stained concrete Ideal for identifying production...
Watco Concrete Floor Paint Matt
Easy to use pre-mixed, single-pack, polyurethane matt coating for light traffic areas in warehouses, garages, and other concrete floors. Superior impact, hardness and adhesion Tested to CE Mark EN1504-2 ‘Best Ever Formula’ twice as durable as before Transforms and dustproofs drab, stained concrete Ideal for identifying production and...