- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
The ultimate protective coating for decking, an ultra durable non slip finish that prolongs the life of timber decking, pontoons, and more.
- Only one coat required
- Easy to apply, 3-component product
- Resists UV fading and discolouration, flexible to resist cracking
- Flexible, two part polyaspartic resin
- Excellent slip resistance. PTV (wet) 67
- In dry conditions can be applied in temperatures ranging from -10°C to 30°C
- Excellent resistance to chemical spillage
- Not for general consumer use
Description
Watco Decksafe Advanced uses the latest polyaspartic resin technology for an exceptionally durable protective and anti slip decking coating. It has outstanding abrasion resistance and will resist chalking, fading, weathering and has exceptional resistance to UV. Watco Decksafe Advanced will also tolerate movement and vibration without cracking.
It is tough enough for heavily used decks, such as pubs, schools, public boardwalks and marinas etc. Watco Decksafe has a Pendulum Test Value of 67 (wet).
Quick Links - Click To Jump To Section:
Features & Benefits
- Areas of use include:
- Decking, including commercial and public access decks
- Helps protect and prolong the life of the decking
- Textured to create an anti slip finish. PTV (wet) 67
- Will resist UV fading and discolouration
- Excellent resistance to chemical spillage
- Easy to apply with a short pile roller or brush
- Flexible to resist cracking
- Excellent abrasion resistance
- In dry conditions can be applied in temperatures ranging from -10°C to 30°C
Surface Preparation
Surfaces to be treated should be clean, dry and free from mould or any other surface contaminant likely to cause adhesion problems such as wax, grease, oil etc.
Some pre-treated woods are sealed which can create adhesion problems. Splash on a small amount of water; if beading occurs the surface will need lightly sanding in order to create a key.
Mixing
Mix between 10°C - 25°C. Remove the three inner tins from the outer tin. Stir the liquid parts individually and pour into the large outer tin.
Ensure that the tin contents are completely emptied by scraping the sides etc. Now add the aggregate and mix the components together using a Watco mixing stick or similar until an even blend/consistency is obtained. Do not mix more than one tin at a time.
If a mixing blade and electric drill are used, also use a spatula to ensure that any unmixed material from the sides, corners and bottom of the tin is not missed.
Do not dilute.
Application
The area should be dry with a floor temperature of between -10°C - 30°C.
The viscosity will become somewhat thicker when applied at temperatures below 0°C and result in a slight loss of coverage.
When mixed, a short pile roller should be used to work the product over the area.
If the product is applied too thickly, curing problems can occur.
Product Details
9280-946999
Data sheet
- Manufacturer
- Watco
- For Use By
- Professional Use
- Interior / Exterior Use
- Interior & Exterior
- For Use On
- Wood
- Application Method
- Short pile roller
Cut in using a brush - Single, Two or Three Pack
- Three-Pack
- Pack Size
- 2.5L
- Pot Life (at 20°C)
- 25 - 30 minutes at 15°C.
Higher temperatures will shorten the pot life. - Coverage
- Approximately 20m² per coat although this can vary depending upon the porosity of the wood.
When applying to a rough surface or in temperatures below 5°C, it is important that the product is worked out as it can become harder to apply. - Recommended Thinner/Cleaner
- Water
- Recommended Thinner/Cleaner
- Use Watco Cleaning Solvent TH99 to remove splashes or cleaning tools before the Decksafe Advanced starts to cure
- Min. Application Temperature
- -10c
- Min. Application Temperature
- Floor temperature: -10°C
- UN Number
- N/A
- Resistance to chemicals
- Petrol
- Resistance to chemicals
- Cleaning Products
- Resistance to chemicals
- Oil
- Dry to Recoat
- -10°C 30 hours
0°C 16 hours
5°C 10-12 hours
20°C 4-5 hours - Base Type
- Polyaspartic
- Base Type
- Solvent-Based
- Suitable For Use On
- Decking
- Suitable For Use On
- Wood
- Suitable For Use On
- Timber
- Finish
- Gloss
- Application Method
- Brush
- Application Method
- Roller
- Components
- 3K
- Product Range
- Decksafe
- Dry for Light Traffic
- -10°C 36 hours
0°C 24 hours
5°C 18 hours
20°C 6-8 hours - Dry for Heavy Traffic
- -10°C 48 hours
0°C 36 hours
5°C 24 hours
20°C 12 hours - Colour Family
- Clear
- Categorised As
- Floor Paints > Low Temperature Anti-Slip Floor Paints
- Categorised As
- Anti-Slip > Decking
- Seasonal
- Cold Weather
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Watco Decksafe Advanced is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
*All estimates are based on theoretical consumption rates for a single coat and do not take into account any substrate deviations or wastage
You might also like
