- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
- Matt grey modified chlorinated rubber primer.
- For multi-purpose use on steel, wood, and GRP.
- Can be applied underwater on prepared steel or as a sealer coat.
- Includes Zinc Phosphate for enhanced protection.
Teamac Metaclor Underwater Primer
The product is a single-pack, modified chlorinated rubber primer specifically designed to offer durable and versatile protection for steel, wood, and GRP (Glass Reinforced Plastic) surfaces. Its unique formulation includes Zinc Phosphate, which provides superior protection against corrosion, making it ideal for use in marine environments where long-lasting durability is essential.
Applications
This primer is highly versatile and can be applied as an underwater primer on prepared steel surfaces or used as a sealer coat over most conventional systems. It is particularly suitable for areas exposed to harsh marine conditions, offering a reliable barrier against water ingress and corrosion. The product can also be applied to old, aged coatings, including antifouling, after the recommended surface preparation.
Surface Preparation
To achieve the best results, ensure that all surfaces are clean, dry, and free from grease, oil, and other contaminants. For bare steel, it is recommended to carry out blast cleaning to SA 2½ standards. In cases where blast cleaning is impractical, mechanical cleaning should be employed. However, hand cleaning does not achieve the required level of preparation, so care must be taken to address all areas, including edges, corners, and welds. For existing painted surfaces, they should be cleaned, degreased, and sanded to create an adequate key before applying this primer.
Application Guidelines
This primer can be applied using airless spray or brush methods, depending on the specific requirements of the job. The drying time is influenced by environmental conditions such as temperature and humidity. Ensure good ventilation during application and drying, especially in confined spaces. The minimum overcoating time is 8 hours, but it is recommended to consult the technical data sheet for detailed instructions.
Restrictions and Limitations
It is important to note that this product should not be used on surfaces that are not properly prepared, as this can significantly reduce its effectiveness. Additionally, avoid applying the primer in conditions of high humidity or low temperature, as these can adversely affect the drying time and overall performance. The product is intended for professional or industrial use only, and users should always refer to the downloadable data sheet for more detailed information.
Recommended Products
For optimal performance and protection, it is recommended to follow up with Teamac Antifouling paints or use the primer as part of a specified Teamac anti-corrosive system. Always apply a small test area first to ensure compatibility with the existing paint systems.
Health and Safety
- UN Number: 1263
Poses risks such as skin irritation, serious eye irritation, and respiratory tract irritation. Prolonged exposure may cause organ damage. It contains substances like Xylene and Hydrocarbons, which are hazardous to aquatic life with long-lasting effects. Users must wear appropriate protective equipment and ensure proper ventilation. Dispose of the product in accordance with local regulations.
Data sheet
- Manufacturer
- Teamac
- For Use By
- Consumer Use
- Interior / Exterior Use
- Interior & Exterior
- Water / Solvent Based
- Solvent
- For Use On
- Steel
Wood
GRP - Application Method
- Airless Spray, Brush
- Sheen
- Matt
- Colour
- Standard / Ready Mixed
- Single, Two or Three Pack
- Single
- Pack Size
- 1L
2.5L
5L - Dry to Handle (at 20°C)
- 6 Hours
- Dry to Recoat (at 20°C)
- Minimum 8 hours
- Coverage
- 6.5-10m² per litre
- Recommended Thinner/Cleaner
- Teamac Thinner 16
- Solids by Volume
- 37.5%
- VOC
- 501 g/litre
- Touch Dry
- 30 Mins
- Size
- 1 litre, 2.5 litre, 5 litre and 20 litre
- UN Number
- UN1263
- Base Type
- Solvent-Based
- Base Type
- Chlorinated Rubber
- Suitable For Use On
- Steel
- Suitable For Use On
- GRP
- Suitable For Use On
- Compatible Existing Coatings
- Suitable For Use On
- Wood
- Finish
- Matt
- Application Method
- Brush
- Application Method
- Spray
- Manufacturer
- Teamac
- Components
- 1K
- Usages
- Marine Applications
- Usages
- Atmospheric
- Usages
- Zinc Phosphate
- Usages
- Immersion
- Product Usage Type
- Primer
- Product Range
- Metaclor
- Colour Family
- Grey
- Dry to Recoat (@ 20-25°C)
- 8 hours
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Teamac Metaclor Underwater Primer is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT
Teamac Thinner 16
Clear liquid thinner. Two-pack, quick-evaporating thinner, ideal for industrial applications. Perfect for spraying on Rapidry, Metaclor, and Anti-corrosive Finish surfaces.
General Painting Application Kit
Provides the basics for any painting project. Whether it is a one off job, or you just want to make sure the right application tools get to site. Provides an economical way of making sure you will have what you need Ideal for interior and exterior paint projects, including uPVC surfaces, walls, ceilings, and more. Click to jump down to...