UltraPrime PRO can be applied on porous surfaces: concrete, cement, etc. It does not need to be diluted. Depending on the condition of the surface to be treated, ie unevenness, or plane level, the yield can vary between 150-300 g/sqm. in several layers.

It can be applied with a roller, brush, or airless spray equipment (check pot life). It can be applied on surfaces with a maximum surface humidity of 5%. Do not apply to surfaces that are damp or exuding water coming from the interior of the substrate (water pressure due to phreatic level, condensations, leaking, etc.).

UltraPrime PRO can be applied in combination with mineral particles (silica sand) on very uneven surfaces.

It has CE marking if it is used in the waterproofing UltraFlex system under European guide ETAG #005.

Quick Links - Click To Jump To Section:

   
• Features & Benefits
• Application

Features & Benefits

• Two component, low viscosity, 100% solid resin
• Only required when used as part of the Eagle Car Park System
• For other applications please see the one-pack Eagle Ultraprime
• It is specially designed to increase adherence and improve the planimetry of the surfaces where be applied UltraFlex waterproofing and coating systems
• To apply on porous substrates such as concrete or mortar

Application

• The surface must be clean and dry
• If necessary, use pressurised water to remove any oil or grease residue, efflorescence, or other contaminants, as well as loose cement latencies
• Before applying, take into account the residual humidity from cleaning and do not apply if it’s higher than 5%, that is, wait until its total evaporation or verify any humidity in the surface using a measuring device
• In some cases, it will be necessary to use mechanical processes to prepare the surface, as well as chemical means to clean metal surfaces
• Mix the two components of UltraPrime PRO for about 2 minutes (medium speed)
• Apply two or more coats of UltraPrime PRO until the desired thickness is obtained
• If the surface to be treated is very uneven, apply an initial coat of UltraPrime PRO mixed with mineral filings to level it
• Wait until completely dry before applying the desired waterproofing or concrete protection system