- There are no more items in your cart
- Shipping Calculated at checkout
-
Sub-Total (inc. VAT)
£0.00
Used to fill cracks and rigid joints and carry out small repairs in horizontal and vertical concrete substrates, including those underwater. Application examples include:
- Repairing and protecting submerged concrete structures such as: piles for pier, canals or dams, structures in ports or in the open sea, etc
- Sealing underwater formworks
- For professional use only
Mapepoxy UV-S IT is an epoxy putty made from two pre-dosed components (component A = resin and component B = catalyser) which are mixed together in equal parts by weight or by volume prior to use.
Quick Links - Click To Jump To Section:
Features & Benefits
- When mixed, Mapepoxy UV-S IT forms a highly thixotropic paste that is also suitable for application on vertical surfaces
- Mapepoxy UV-S IT even cures on wet substrates and, when hardened, it becomes waterproof Mapepoxy UV-S IT is characterised by a high mechanical strength and bonds perfectly to concrete
- Mapepoxy UV-S IT can resist to the aggression of acids, bases, salts, oils, hydrocarbons, solvents and freeze-thaw cycles
- Mapepoxy UV-S IT complies with the principles defined in EN 1504-9 (“Products and systems for the protection and repair of concrete structures: definitions, requirements, quality control and evaluation of conformity. General principles for use of products and systems”), and the minimum requirements of EN 1504-3 (“Structural and non-structural repairs”) for R2- class non-structural mortars and with the requirements of EN 1504-2 standard coating (C), according to the PI, MC, PR, RC and IR principles (Surface protection systems for concrete)
Recommendations & Limitations
- Do not use Mapepoxy UV-S IT if the temperature is lower than 5°C
- Do not apply Mapepoxy UV-S IT on dirty, crumbling or weak substrates
- In hot weather do not expose the product to direct sunlight
- Apply the product during the cooler parts of the day so that it does not harden too quickly and become more difficult to apply
- In cold weather, if the product is to be applied outside and the temperature is lower than 5°C, heat the substrate for at least 24 hours before applying the product and use a suitable insulating system to prevent the risk of freezing
Application & Preparation
Please refer to the data sheets in the tab above for further information.
Data sheet
- Manufacturer
- Mapei
- For Use By
- Professional Use
- For Use On
- Concrete
- Single, Two or Three Pack
- Two-Pack
- Pack Size
- 10KG (5KG Comp. A, 5KG Comp B)
- Coverage
- 1.60 kg/dm³ of cavities to be filled.
- Suitable For Use On
- Concrete
- Manufacturer
- Mapei
- Product Usage Type
- Filler
- Colour Family
- Green
Questions
Question about the product
Be the first to ask a question about this product!
IMPORTANT SHIPPING & DELIVERY INFORMATION
Mapei Mapepoxy UV-S IT is only available with the shipping and delivery timescales listed below - please do not contact our Customer Support Team with enquiries about alternative or earlier shipping and delivery times.
Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
Orders placed after the cut-off for this product will not be processed for earliest dispatch until 9am the next working day.
All delivery costs below are excluding VAT