- There are no more items in your cart
- Shipping Calculated at checkout
- Sub-Total (inc. VAT) £0.00
Need Help?
Repair Materials
At Rawlins Paints, we stock a wide range of asphalt, concrete and metal repair products to deal with damage to floors, walls, pipes, driveways and other surfaces - including epoxy repair mortars, flexible fillers, self-levelling screeds, emergency pipe repair kits and road repair products to ceramic pipe repair products, for interior and exterior use. Click here for more info.
Watco Asphalt Easy Fill
A flexible rubberised filler that seals cracks in asphalt, concrete, metal, stone, and brick, helping protect against damage caused by water ingress and erosion.Dries in 24 hours Fits a standard skeleton gun for quick clean repairs Remains flexible for years, moves with substrate (+/-5%)Note: While great care is taken with the...
Watco Asphalt Crack Filler
A rubberised bitumen-based product that makes crack repairs on asphalt and tarmac easy, simply pouring into cracks up to 3mm from a spouted can. Ideal for use in car parks and on walkways, school playgrounds, and more.Quick to dry - approx. 2-4 hours for cracks up to 3mm Interior and exterior use Flexible to allow for expansion and...
Watco Floor Joint Sealant
A two-part pouring grade flexible polyaspartic sealant with excellent wear and chemical resistance for filling and sealing expansion joints and construction day joints. Ideal for construction day joints between concrete slabs, factory and warehouse floors, car parks, garages, petrol station forecourts, etc.Easy pour polyaspartic Use in...
Watco Concrex Carbon Fibre Epoxy Repair Mortar
Permanent granite hard repairs where ordinary mortars fail. For super strength long lasting repairs to concrete floors, ramps & steps. The strongest, longest lasting epoxy floor repair mortar that you can buy!Stronger than cement-based alternatives Faster drying, ready for traffic in just 1 hour 20-year guarantee against impact and...
Watco Flowpatch Deep Fill
Quick setting, pourable repairs for deep holes in heavily trafficked floors. Ideal for filling deep holes before screeding with Watco Flowtop.Fibre reinforced for added strength Forklift traffic in just 2 hours Just add water, mix, and pour Can be applied to damp (not wet) concrete Sets at low temperatures (down to 5°C) Apply at any...
Ronacrete RonaBond Flowable Micro Concrete
Prepacked flowable repair concrete for pumping or pouring, used for reinstatement of structural elements such as columns and beams. For when hand application of mortars is impractical or undesirable.Conforms to BS EN 1504-3 High strength flowable micro concrete - free flows in to shuttering and formwork Shrinkage compensated - protects...
Watco Tack Coat
High strength 100% solids epoxy resin adhesive primer, with sub-zero option for use at low temperatures.For use with Watco Concrex Makes shallow or intricate repairs easier Overcoat in 30-60 minutes Cures at 0°C Suitable for use on concrete and metalNote: While great care is taken with the colour samples shown, no guarantee can...
Watco Flowpatch Quick Setting Pourable Repair Mortar
Quick setting, pourable repairs for filling holes in heavily trafficked concrete floors, inside and out. Ideal for filling deep holes before screeding with Watco Flowtop.Flowpatch and Flowpatch Coloured Easy to use rapid dry formula Takes forklifts in just 2 hours Just add water, mix and pour Fibre reinforced for added strength...
Ronacrete RonaScreed FastDry Prompt
Fast drying liquid screed additive for site batched screeds - formerly known as RonaScreed 8 Day Overlay.Reduces on site delays - much more cost effective than cement replacement products Lay flooring over 50mm screeds after 4 daysOver 75mm and 100mm screeds after 6 daysConforms to BS EN 13813 Early commissioning of underfloor...
Ronacrete Ronafix Universal
Admixture for thin bonded, floating and unbonded screeds and toppings. Applications include:Floor screeds, concrete repair Waterproof renders Slurry coats/levelling and protective Heavy-duty floor toppings Protection of steel reinforcement Bedding and bonding mortars Tanking and waterproofingConforms to BS EN 934-2 Open to...
Ronacrete RonaScreed Renovation Screed
Grey self-smoothing, fibre-reinforced cementitious screed. For residential, commercial, and light industrial use. Ideal on concrete, screeds, ceramic tiles, plywood, and underfloor heating. Fast-setting: walkable after 2 hours. Ready for tiles in 4. Flexible and durable.
Ronacrete RonaScreed Flowable Base
Grey self-smoothing screed for quick installation. For floor coverings such as vinyl, carpet, and tiles. Ideal on concrete, screed, tiles and more. Rapid setting, ready for foot traffic in 2 hours at 20°C.
Ronacrete RonaScreed Feather Finish
In grey. Flexible floor smoothing compound; fast-drying. For levelling concrete, cement/sand screeds, plywood, and tile grout joints. Rapid setting - Foot traffic in just 15 minutes @ 20°C.
Ronacrete RonaScreed Flowable Topping
Grey flowable topping screed. For residential, commercial, and light industrial concrete and screed surfaces, suitable for both internal and external use. Fast setting - ready for foot traffic within 2 hours at 20°C. Can be overlaid with various floor finishes within 24 hours. Compressive strength of over 44N/mm².
Ronacrete RonaScreed Primer
White acrylic dispersion primer. Improves adhesion and prevents water penetration in intermittently damp locations. For sand/cement screeds, concrete, and render. Seals porous substrates and acts as a bonding primer for flowable screeds. Economical and easy to apply with excellent coverage.
Ronacrete EP LV
Two-component low viscosity epoxy resin for crack repairs, available in various colours. Suitable for use on concrete, cementitious screeds, brickwork, and masonry. Excellent bond strength and penetration into cracks as narrow as 0.2 mm. Water-resistant and usable on damp or dry surfaces. Certified for industrial and professional use...
Bonda Tough Fill
Two-part polyester filler. For all interior and exterior wood, metal, concrete and GRP. Rapid hardening properties for filling and repairing. Hardens in 10-15 mins at ambient temperature. Strong, long lasting repair.
Need Help?
Need Help?
Driveway Repair
For asphalt patching we stock Rust-Oleum Asphalt Repair and a Rust-Oleum tamper. It’s a durable bitumen-based patch repair material made up of a liquid binder and polished aggregate. These products can be used to repair holes between 25 and 100mm in size, so it’s great if you have to repair larger asphalt damage to a road surface.
Kerb Repair Products
Rust-Oleum Verti-Patch is a unique repair product with special lightweight fillers, meaning it can repair damaged vertical render, concrete and stone. Perfect for kerb repair or wall repair, this epoxy repair mortar dries as hard as granite and can be used inside and outside. It’s easy to use and great for frost-spalled concrete surfaces that need to be reinforced.
Concrete Repairs
Very cold weather and temperatures can make concrete tricky to repair. Sometimes conventional repair mortars can’t fully dry or cure in low temperatures and something like Coo-Var CSP Mortar is needed. This is an epoxy-based repair mortar for concrete surfaces (either walls or floors) that need to be repaired before they can be painted or coated, or just need a stand-alone repair.
For a really fast repair to concrete, troughs, ramps, coving and steps, Rust Oleum Speed Patch works well. It sets fast and is a very high-strength concrete repair mortar, giving you the finish you want with the minimum of fuss and expense.
Flooring Repairs
If you need a very strong floor repair, choose Rust-Oleum Epoxy Repair Mortar. This product is actually stronger than concrete, making it perfect to repair floors that endure a lot of heavy traffic. Specifically for fixing and repairing bay edges, eroded or damaged concrete and broken steps, this epoxy mortar doesn’t shrink or crack. It can be used inside or outside and means the surface will quickly be back in action. Repairs made with this product are pretty much indestructible.
For quick and lighter repairs on concrete floors and walls, try Rust-Oleum Light Duty Epoxy Repair and Sikagard 720 EpoCem, which is a three part epoxy and cement combination micro mortar for surface repairs.
Self-Levelling Products
Smoothing uneven surfaces and floors calls for a fast acting and durable product, like Rust-Oleum Speed Screed. Ideal for transforming rough concrete floors this is a self-smoothing screed that leaves a slip-resistant surface in a light grey colour. Ideal for industrial areas that are exposed to heavy traffic and chemicals.
SikaLevel Latex Ultra is a very quick setting cement-based powder that can be mixed with water and used to level out uneven floors and screeds. It can either be covered with a floor coating or can be left as is for a smooth, even surface. Another powder repair product, Rust-Oleum Pegacrete can also be mixed with water to level and repair cracks in cement renderings, concrete and brickwork. It’s guaranteed not to shrink and can be used inside or outside.
Fine Crack Repair
Fine cracks in concrete need specific products to fix and repair them. A specifically developed liquid crack filler for concrete, Rust-Oleum Epoxyshield Fine Crack Repair that is guaranteed to be non-shrink ensuring a smooth finish to the concrete surface. This is an economic way to repair a concrete floor and works well for cracks up to 3mm wide.